Catalyst Drivers Will Not Install?
Oct 6, 2011
A few days back I picked up an AMD C-60 powered netbook, an ASUS 1015BX to be exact.As the stock HD is not terribly large, and Windows 7 Starter is quite terrible, the first thing I did was stick 4GB RAM into it, swap the HD and install Windows 7 Home Premium 64-Bit.Now, the issue I am having is that the video drivers will not install properly.When attempting to install the AMD official driver packages the 'Vision Engine Control Center' is installed but it only lists information on the CPU.The driver listed on ASUS' support site (x86 only, like most of their drivers for this netbook ) does install CCC but it can not be opened. With all attempted driver installations the Device Manager lists the GPU as a 'Standard VGA Display Adapter'.Additionally, I was sure to update Windows to SP1 before installing any drivers (as required with 11.9).So far I have tried reinstalling Windows 64-Bit, then Windows 32-Bit and trying driver versions 11.9-11.5 along with the ASUS supplied driver on the 32-Bit install.At no time has the driver been accepted, although I am sure the hardware is working as the drivers on the original instillation where.So, does anyone have any ideas on how I could solve this?With the AMD C and E series being so popular now, and me not being the only one with This Issue, I am sure someone here has encountered and solved this issue.Maybe it would be possible to take the driver straight out of the stock instillation (I have not yet formatted the disk)
View 43 Replies
ADVERTISEMENT
Apr 10, 2012
My catalyst control center was bugged so i decided to just do a complete uninstallation, which was successful. When i went to do the fresh install, the install manager would not give me the option of install the catalyst control center even though i uninstalled it. i have been looking through various fourms for solutions, but i only found one that seemed appropriate but it failed. it was the solution of looking in windowsassembly and uninstalling the ATI related products with the public key code of 90ba70f846762.
View 1 Replies
View Related
Apr 30, 2012
I've recently been having various issues with my pc, among the things I tried to do was update my graphics card driver: found the newest driver crashed madly, and rolled back.What benefits are there in going for the newer ATI Catalyst drivers compared to the one defaulted by windows but which hasn't updated in 3 years. Generally what could have changed? Compatablity? If it works it works. Stablity? Performance? Heat management?Since it takes me 2 hours to download a driver (slow connection) I'm sticking on my Windows 7 default ones: I know they work. It does make me ask though if there is a benefit to upgading after i've got my PC stable again.
View 5 Replies
View Related
Apr 21, 2011
im having a hard time with fixing my computer's view how can i get it back?
View 2 Replies
View Related
Oct 22, 2009
ATI has released its Catalyst v9.10 drivers.
Download Link:-
http://game.amd.com/us-en/drivers_catalyst.aspx
View 4 Replies
View Related
Oct 6, 2011
I had to uninstall the ATI Catalyst Install Manager and Control Center to update from VISTA to Window7.I can't find the same download I previously had. I keep getting guided fron one product to another.
View 2 Replies
View Related
May 4, 2012
So I wanted to install newest version of catalyst control center and it would install it but nothing would change. I formatted my laptop and still it wont install the newest version of ccc. I downloaded a driver from toshibas site it would install that but it seems like an old version (2010.0315.1050.17562).
This are my computers specs: windows 7, 6 gig dd3 ram, Intel core-i5-430m 2.260 MHz, ATI Mobility Radeon HD 5650
View 2 Replies
View Related
Jun 10, 2012
Mistakenly I uninstall AMD Catalyst Install Manager...But it still shows on my computer..How I reinstall that program again..
View 3 Replies
View Related
Jan 15, 2013
Ive been trying to install this program on my computer because when i plug my laptop by HDMI cable to my Samsung TV, the resolution does not fit well and everything looks pixelated.My friend had the same problem but his laptop included the Catalyst Control Center and he made some adjustments and the problem was solved.I already installed the program but when i right click on my deskop the program doesnt show up on the options, on my control panel it says it is installed but it wont open for some reason.My computer is an HP Pavillion dv4-4068la with Intel HD graphics card.
View 2 Replies
View Related
Jun 29, 2011
When i run ati catalyst manager i am getting the massege
"Could not load file or assembly MOM.Implementation or one of it dependencies. system connot find the files specified"
View 7 Replies
View Related
May 16, 2012
I cannot find the dowload called ATI Catalyst Install Manager. I have version 3.0.732.0 installed and I wish to reinstall it after upgrading to windows 7 and cannot find the exact programme on your site.
View 3 Replies
View Related
Feb 3, 2013
Ati catalyst install manager windows 7?
View 1 Replies
View Related
Nov 17, 2009
I have an Optiplex 760 with Dell's ATI Radeon HD3470 256MB, running Windows 7 Professional x64 (I also experienced this problem with the 32-bit version). Dell's latest drivers for the card work fine (version 8.640), but anytime I try to install a newer (including the latest) version of the ATI drivers, Windows bluescreens. The initial setup procedures go ok, and I can choose to install, then I select Custom (although I have tried Express with similar results), and when it begins to detect the hardware, it gets to about 10-20% and then bluescreens. The same thing happens when trying to install the Avivo Video Converter; it bluescreens on the detection page. So far, I have only tried the driver-only package and the Avivo
View 9 Replies
View Related
Sep 28, 2009
I am getting my desktop ready for the launch of Windows 7 and I done a check with advisor and it said I I have to get a update for 'ATI catalyst control center' and my version which was installed onn the desktop when I got it is1.2.2113.53 but I cannot find the update and all it says is version 9.9.
Ken
View 3 Replies
View Related
Nov 9, 2009
I tried to set up my windows 7 but it said that my ATI catalyst control center is incompatible with windows 7. what should i do? Also i cant get rid of it because it is used for my graphics card.
View 8 Replies
View Related
Nov 17, 2011
After a fresh install of Windows 7 Ultimate 64-bit, I used windows update to install all the updates available, and then after restarting I install the AMD graphics drivers. Upon rebooting, the system just hangs on the Windows Loading Logo.
What I have done so far:
I have tried the 11.10 and 11.11 drivers, same effect.I tried just using the driver only and the full catalyst package, both produce the same results.I have tried installing the drivers supplied by windows, but this process fails with an error code that suggests that I already have drivers in place. I have used driver sweeper in safe made to get rid of any video drivers before trying to reinstall, but the effect is the same. After every driver install, I must reboot into safe mood and restore to a previous point to be able to boot back into the full version of windows.
Previous History:This system was working fine with the 11.10 Catalyst package before reinstalling windows.
Relevant System Specs:
OS: Windows 7 Ultimate x64 w/ SP 1
Processor: Intel Core i7 920
Motherboard: Gigabyte GA-EX58-UD4P
Memory: 12gb OCZ DDR3 1600
Hard Drive: Seagate Barracuda 1.5 TB
Graphics Card: ATI Radeon HD 5970 2gb
PSU: Corsair CMPSU-750TX 750 watt
View 15 Replies
View Related
Dec 25, 2012
catalyst control center isn't appearing in catalyst install manager? i have uninstalled all ati stuff from my laptop and ccc simply won't appear, also, when installing the display driver, my screen resolution will always get ruined and becomes stretched and messed up. and i am having problems with battlefield 3, where my terrain becomes black and just a bunch of random boxes, similar to this - battlefield 3 graphics problem (black ground) (solved) - Internet but i'm trying to install catalyst bullshit and leads to my first question.
View 9 Replies
View Related
May 18, 2012
I have a 8500 all in wonder 128 mb card. the machine is win 7. i can install the drivers, but cant seem to get the control center to install. when i do try to install it, the message tells me to install generic card drivers first. i have tried that to no avail.
View 2 Replies
View Related
May 1, 2012
i have a dell inspiron1464 laptop with windows7 professional 32bit. 4gb ram and core i3 . i have problems in the installation of amd catalyst driver. it shows no error while installing ,but no change in the laptop after that. when i was going to uninstall it , it shows their is no ati catalyst installed.
View 2 Replies
View Related
Oct 9, 2012
[I reinstalled Windows 7 using the Upgrade option (not clean install) but before I could do the reinstall it said I had to uninstall Ati Technologies which I could then reinstall after the upgraded Windows]I ran install for the Catalyst Softward Suite for drivers which had the CCC listed, but there is no CCC option in the install list when I run to install. It just doesn't appear! I've uninstalled ATI Catalyst Install Manager, ran Driver Sweeper in safe mode and then reinstalled but still the CCC does not appear in the list. I've also checked the Windows/Assesmbly key problem too. It's the same problem as this post: Catalyst Control Center missing/Wont install?I have a Radeon 4000 series card.
View 4 Replies
View Related
Jun 4, 2012
I click update now, and install. When i look back at the update pannel it says i have 12.3. After the download it says "warnings occured during installation."
I've uninstalled it, ran a sweeper to "clean and anaylze" Amd-Vision(in safe mode).
View 2 Replies
View Related
Jan 11, 2009
the following section provides a summary of open issues that may be experienced under the windows 7 operating system in the latest version of catalyst™. these include:on some configurations ubisoft wheelman may stop responding during gameplay catalyst control center: enabling lcd overdrive may cause magnification of the mouse cursor when moved overtop of the calibration preview adobe flash player 10.1 pre‐release: dropped frames and browser lag may be noticed when playing multiple instances of Internet clips with hardware acceleration enabled a perfromance drop does occur durring resident evil 5 cinematics no sound output on hdmi.
when playing back some blu‐ray content in power dvd 9 catalyst control center: newly added custom modes may fail to be displayed in desktop tree view loss of hdmi signal may occus on some hdmi tvs, on rescan of the hdmi signal it may apear in the wrong screen location. cyberling power dvd 9: dts truehd option may not be visible in the hdmi tab on some systems. city of heros: with certain graphics adapters some screen flashing might be observed during game play.
View 9 Replies
View Related
Jan 18, 2013
My graphics drivers appear to be stuck on this version - every time I try to update, it goes through the whole process and looks like it exits successfully, but every time a new update is released it says my version is 12.4. <_<
View 4 Replies
View Related
Jan 30, 2012
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
View 5 Replies
View Related
May 1, 2012
I keeping getting this message: Catalyst Control Center: Host stopped working. The tech that is assisting me, provided me with a link to Drivesweeper, however, the site says that the drivesweeper has been discontinued. I need another link for a "driversweeper" or the like
View 5 Replies
View Related
Nov 23, 2008
ATI Catalyst Windows 7 preview driver package - includes the Windows 7 driver, and the ATI Catalyst Control Center (with limited feature support). AMD Customer Care
I'd get mine, but, I don't have Windows Seven public beta - where is it.. (Remember they may upgrade drivers before 7 beta officially released.)
Note: This driver is provided as is and is not supported by AMD. It has not completed full AMD testing.
PS. I left the tags out because of errors - '7' too short must be 3 char. and 'seven' is too common a word! So, no 7 seven windows tags for you ...
View 9 Replies
View Related
Aug 4, 2011
I installed CCC recently. When I restarted my computer it started becoming unresponsive and locked up alot.
View 9 Replies
View Related
Aug 12, 2009
i just installed win 7 rtm. i only installed avira and then tried to install catalyst, but i get bsod during installation.
i have an ati 3300 (integrated) + 3400.
any idea?
View 2 Replies
View Related
Feb 3, 2012
Im running a 6870 with windows 7 64-bit for the most part i have had no problems with catalyst or the card, apart from a random occurence where the screen rolls over, so the left side goes into the right and it just moves to the left so it still covers the screen, HOWEVER thats not my current issue, i recently used 'Driver sweeper' to clear all AMD drivers and do a fresh install of the frivers/catalyst to see if i could stop the occasional "this driver has stoped responding but has been seccesfully recovered" rerroes, or this screen spiltting issue, because i presumed it was a software issue, and then i re-installed with the 11.12 version, which at teh end came up with a message that there were erros and to read the log, which i did and thety all said sucess with nothing down the bottom saying anything about an error, but it all still worked althoguh i still had hte not responding error however i recently installed the 12.2 preview drivers, 9aswell as the 12.1 drivers), both of these version after i install them catalyst wont open, on both right clicking the desktop and running ccc.exe after i installed it i havnt had any not responding or BSOD errors, however i cant acces catalyst, and on some occasions when i installed hte 11.12 drivers random things like not being able to acces catalyst via right-clicking the desktop happened, i have had a look at many posts about it not worknig or opening up ,but they all come back with a fixx where they just removed and installed it fresh, well i have triyed the amd uninstalled aswell as driver sweeper, both to no avail, and i have hte lates .net framwork to support catalyst, i just dont understand why it wont work and now when im trying to acces catalyst explorer comes up with the not responding error, and i can see catalyst in the task manager pop up for a second but then it goes away, i will check msconfig and services to make sure its all working but i cant think of any reason why it wont work at all.
View 1 Replies
View Related
Feb 6, 2012
I just upgraded my AMD catalyst software to 12.4 on my HTPC. Been noticing that when I am viewing via my Sharp 19"LED TV I get signal cut out after about 20 minutes. I notice this when my screen save comes on in WMC. It eventually craps out and I get "no signal" messages on my screen. It comes back if I simply click on the mouse.This never used to happen before. I could leave the HTPC on over night and simply turn the TV monitor off. When I would turn the monitor on in the morning, the Desktop would be visible.Are there new settings in 12.4 that could be causing signal cut out (i.e. like an energy saver option)?
View 4 Replies
View Related
Mar 11, 2011
upon upgrading to windows 7 I received an error message to delete ati catalyst and ati catalyst control center and after upgrade to reinstall them. How do I uninstall this.
View 1 Replies
View Related
