my laptop windows home vista cannot shut down properly and when I open my window it show please wait, then welcome and then it keep running logging off .I cannot open my window. And put off my laptop and start again I can open my laptop with safe mode with networking, but if I shutdown It happen same condition. Its show also shutting down not properly and window did not responds.
Whenever I run iTunes after a boot, it opens fine. After it's been shut down, it won't re-open, and I can't shut it down via Task Manager. Only after I reboot can I run iTunes again.
Is there anyway that I can get windows to repoen all the programs I had open when I last shut the machine down when I re-start it? i.e. same work processors programming tool with the same files open and ideally curser in the same place?
So my laptop was working fine last night, woke up this morning and this issue appeared. I'm guessing it's a virus (stupidly, I haven't installed an AVP on this machine yet). Anyways, I can't open anything. Doesn't matter where I try to open the program or file from. The load icon appears but nothing happens. I also can't access the task manager or shut down/log off/etc. from the start menu, I get a "Failure to display security and shut down options" error msg. I'm in safe mode with networking right now, which is allowing me to open programs. I've already tried a system restore but it didn't solve the problem.
I have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine.
When I have a couple of screens open on my desktop. When I click on an icon for, lets say, iTunes, I can see the iTunes window appear behind the translucent taskbar of Win 7. Ditto for MS World.How do i get programs that are already open to open up with ONE click, instead of having to closed down all the other windows.
For a while my windows 7 64 bit would open my images in Documents. Now when I try they appear as a garbled strange format. If I go to PSP ProX2 they open fine. This is a problem for me since I often need to add images to document Newsletters I send out.
I own a DCP UPS, and it's been with me for 2.5 years now. Recently (this happened twice) whenever the power shuts down, the UPS makes a screeching noise every 2 seconds (compared with every 5 seconds earlier), the orange battery light flickers on and off, and five seconds later, it shuts down with the computer after the orange light turns red (indicating an emergency).However, when I switched on the UPS, waited for two minutes, then WITHOUT switching on the computer shut the power off, it reacts normally (ie turns to battery power without a hitch).So does this mean that it is unable to bear battery power while the computer is on? And if so, does this mean that I should discard this one and get it replaced? And another final thing - until I do so, should I disconnect this one from the PC in case it may adversely affect the power supply of the CPU?
I want to receive a SMS or E-mail when the win 7 PC is shut down. PC is connected to a microscope control unit and when the scope is running, its very critical that there is no interruptions, we have a UPS but still I want to attend in person when PC is shutdown. So, whenever there is a power outage I want receive a SMS or e-mail at-least. Is it possible to do this,
I'm running on a Windows 7 32 bit system, self built. Before I go into explain all of the details, here are my computer specs..My computer has been crashing a lot recently. It never use to happen, it just started within the past month or so. It's not a BSOD, there's no error, no warning.. Just black. When I start up, it's like nothing ever happened. But it's really annoying, whenever I begin to render a video, it crashes almost every time. It also stopped a few times while I was trying to play games and record, but I have recorded in the past. My computer use to be at it's prime but I don't know what changed. I could really use some advice to fix this. Any suggestions would help, I'm really wanting to render up all the footage I have.I do a lot of video game recording on my PC, I use the program bandicam. Also, my PC doesn't seem to be suffering from overheating, as the hard drive stays cool when it crashes.I keep about 50gb free space open on my computer to avoid extra errors.
I am running windows 7 ultimate and am having a problem with the computer shutting down. When I click shut down it acts like its going to work but all it does is shut off the monitor the fans andeverything else keeps running and unless I hold down the power button it stays that way but if I restart the computer and don't log into a user name I can click shut down and it works fine any suggestions?Processor is a qs9650 Asus p5kc motherboard 4gb ocz ddr3 memory Windows 7 ultimate 32 bit (gave up on 64 bit nothing but problems)
I have Acer Aspire laptop 5560-Sb256 laptop with Windows 7 and lately when I go to shut it down, it gets hung up and the circle comes on...so I close the computer for the night...or whatever...later when I turn it on battery is worn down and I plug it in...Windows does not start normally but it starts.
I have been receiving is that, whenever I try to shut down my computer, it will go to the 'shutting down' screen as usual, bu the shutting down would stay there forever, and does not do anything. This results into shutting down the computer manually by pressing the power button on the CPU. It is very frustrating because when this occurs, it gives off further errors and computer becomes abit unstable. The next time I had logged in (today) I received the folliwing message upon windows starting up. This message happens to ocur after the pc was shut down manually.
My computer shuts down a lot all by it's self and sometimes shutdowns with a Blue Screen of Death. When it usually shuts down by itself it reboots and it tells me that my computer has failed to start so I choose Start Windows Normally then when the Starting Windows Screen comes up my computer gets a differnet Blue Screen of Death. I am not sure what it says when that comes up because it reboots itself after 1 second. I will list the errors and my computer information down below. I get really stressed out over this.
When i try to shut down or restart the computer it goes to a screen saying "Press esc for setup menu" but it's not doing anything. Every time i have to manually restart the computer.
The issue is that any time I play ANY game, when I try to shut down the computer, it stays at the "Shutting Down" phase forever and then after 15-20+ min, sometimes it re-starts itself. Of note, is that when this happens and I manually shut the computer off, and turn it back on I get a "Windows has recovered from an unexpected shutdown" message. and the error ID is BlueScreen-something.
This does NOT occur when I use the PC for anything else such as browsing the internet. No matter what game it is, any time I play a game (not counting minesweeper, solitaire, etc), the computer will not shut down. All drivers seem to be up to date. Any ideas on what could be causing this?
I just recently installed windows 7 ultimate..and everytime I shutdown the computer it automatically installs updates and I do not want that at all.ure..I dont want any updates installed at all without my consent..nor do I want the pc to do any updating before shutting down
While waiting for my new netword card, I was using a USB cable to operate my temporary cable modem (Motrola Surfboard). I installed the drivers right from the CD and it worked well for a day or so until it randomly stopped working. I also couldn't shut down the computer as it would just hang there but I was able to shut down just fine the day before (With the Surfboard plugged in).Now that I have my new NIC installed, I can browse just fine, but I'm unable to shut down without it restarting on me. Meaning I have to hold the power button.I'm using my old cable modem and connected via ethernet. Also, I'm using a new keyboard which is also connected via USB.
I have Win 7 64-bit on my new system, and I've noticed that the HDD LED constantly chatters. It never goes even a second without some disk activity.
I can't compare this to XP, because my XP machine doesn't have an HDD LED (or it's broken, or it's not wired, whatever). My XP HDD is 8 years old and still going strong, though; and that's the sort of reliability I'd like in my new system. That's 8 years of almost 24/7.
In the Win 7 resource monitor, there's usually a bunch of processes using the disk; but if I remain quiet, the long term steady state comes down to NLS and System processes. I can (and may) disable NLS, but I can't disable System. If I suspend NLS when System is the only other process shown, then the disk usage graph clears, but the HDD LED flickering continues. If I suspend System, the LED flickering stops, but then I suffer the predictable consequences.
Not entirely related, I also noticed that early on, for the first several minutes after boot, I get a considerable number of page faults. Seems kind of silly since my RAM usage never goes over 15%, but it's not problematic. The page faults do cease eventually.
My questions are these:
1. Is this constant chatter a Win 7 thing, or does XP do this also?
2. Does anyone have insight as to why the System process would be constantly accessing the HDD and/or how I can stop it from doing so?
3. Since the I/O graph may be cleared (with patience), even though the LED activity continues, is it reasonable to believe that the LED activity is just a tease and no actual I/O is happening at that time?
I recently purchased a ssd and I was curious if there was a way to have my computer automatically shut down after so many minutes of non use? From what I've read I could schedule it in the task scheduler, but I'm not looking for a certain time for it to shut down. Maybe a third party program?
I recently built a Mictro-ATX HTPC with these specs:ASRock H61M-GE mobointel g530 cpu (dual core, 2.4 ghz)4 GB G.Skill DDR3-1333450W FSP brand PSUWD HDD, HP CD/DVD-writer(total: $405 with nMediaPC case, if anyone was curious)The problem is with shutting down. When I press shutdown through the OS, the monitor loses input and goes to sleep, but the PC doesn't power off (case and CPU fans, CD-ROM, power LED, etc. all stay on). Oddly, atleast I think, is that sleep mode works fine! In sleep, the fans shutdown and the power LED blinks like it's supposed to...] M-GE&o=All and will try to update the ME; just a shot in the dark really. I don't know what it does. I don't know what the AXTU is either. Also of interest, while searching for a solution, I noticed that the download page for another mobo by ASRock has a patch to "Modify system can not shut down issue." Maybe a similar issue exists for my mobo but just hasn't been patched yet? I'll call ASRock tomorrow.