how to backup and burn a copy of all the drivers for win 7. I dont have the software with the drivers on.. Just wondering if its possilbe to make a copy of them on to a cd and how to do it.?
I bought a Dell Inspiron 1545 laptop new in Italy in December 2009 from a major computer store. The computer came installed with Windows 7 Home Premium (Italian), and I have installed on it an original version of Microsoft Office XP 2003 Professional Edition (English). The CD-ROM unit is a Matsushita DVD+-RW UJ890.Since I bought the computer I have sometimes had difficulty burning DVDs with the built-in Windows 7 burner function that I access from Explorer. Often in the past I have ended up with partially written DVDs. Nevertheless by using high-quality DVDs I have been able to burn DVDs successfully most of the time using the Windows 7 utility. I last used the utility successfully a couple of months ago when I burned a couple of DVDs to backup some photos.
Since yesterday I have been trying to backup my most important files onto DVDs. The attempt has failed in every case. First I copy about 3 GB of files from drive C: onto drive D: in Explorer. These are several hundred files divided into three different directories, consisting mostly of PDF, Word, Excel, and JPG files, some of them with names in foreign scripts like Cyrillic, Japanese, or Chinese. Then I insert a new DVD (either Verbatim or TDK) and attempt to master the DVD by selecting the option �write to disk� from the Explorer menu (whether from the menus at the top of the screen or by right-clicking on drive D: in the lefthand pane of the screen). A window pops up asking me for the name of the disk, whether I want it to be �flash� or one-time only, and the recording speed (8x, 4x, 2x, etc.).
Once I click �continue� to start burning the DVD, a window pops up to tell me that Windows is making an image of the disk, and then the window tells me that it has begun mastering the disk, giving me a countdown of how many minutes are left (6 minutes to 11 minutes, depending on the speed I choose). But no matter what name I give to the disk and what recording speed I pick, after 30-60 seconds the popup window and the Explorer window both suddenly close and the DVD unit�s writing light goes out, but the DVD unit continues to whir at high speed forever.
Here are the results I got yesterday with 3 separate DVDs:
1. On the first DVD I used Windows 7�s burn utility on a Verbatim DVD, and I ended up with 28 files burned onto the DVD (making it unusable).
2. On the second try I used some simple burn software that I had used before � Roxio Burn � on a TDK DVD, and ended up with 4 files burned onto the disk (but from different folders than the 28 files burned by Windows 7).
3. On my third attempt, after going offline, shutting down my antivirus software (AVG), and using Task Manager to shut down processes from that other burn software, Roxio Burn, I used Windows 7�s burn utility again on a TDK DVD and ended up with the identical 28 files that had I ended up with the first time, though this time I had chosen a lower writing speed.
In all three of these attempts the DVD unit continued to whir after the windows had closed, until such time as I ejected the disk manually.When I first encountered this problem yesterday I thought the problem might be caused by my antivirus software � AVG Free Edition � interfering with the writing process, because after one particular automatic update by AVG about two months ago I began having problems with AVG blocking Skype and placing some of my Nokia cell phone software in quarantine. But by disabling the HIPS element of AVG I was able to resolve those problems several weeks ago and begin using Skype successfully again. But just to be sure, today I disinstalled AVG completely and installed Microsoft Security Essentials. Because I had read in a forum online that Windows 7 might have conflicts with other burning software that was also installed, today I also disinstalled the only burning software that I had installed � Roxio Burn � and did a cold reboot. Before attempting to burn a DVD again today, I also used Task Manager to shut down some other processes that didn�t seem necessary, such as a Nokia autolauncher and a Java autoupdate process. I also changed the time delay for Windows� sleep or power-save function to one hour.
I inserted a new TDK DVD, accepted the disk name proposed by Windows, chose for the disk to be permanent rather than flash, and chose a burning speed of 4x. After 30 seconds I received a popup window with the following message:
�ST Service Scheduling has stopped working.�I ignored this message and did nothing, because often in the past when I have succeeded in burning DVDs with Windows 7's utility I have had this message appear, but if I do nothing I almost always have the burn proceed successfully. In this case, though, after another 10-20 seconds the Explorer window and burning-countdown window both closed, the DVD light went out, but the DVD continued whirring at high velocity. The DVD unit did not respond to my pushing the expel button by hand, and when I tried to expel the DVD using Explorer I only got an error message, so the DVD could be expelled only by shutting down the computer.When I turned the computer back on, I discovered that no files at all had been written to this DVD.below are the details from the ST Service Scheduling error message (in Italian, sorry). Whenever I get these ST Service Scheduling error messages I get them twice, i.e., after choosing �Close� one time the same message immediately appears again and I have to choose �Close� a second time.
Nome evento problema:APPCRASH Nome applicazione:STService.exe Versione applicazione:1.0.0.64 Timestamp applicazione:4ae02c43
I have one internal drive with 1 TB. The data there is very important to me , so I bought External removable drive for backup. Now, I want to copy the data from one drive to the second drive but I have to be sure I have a perfect copy of the data. The data is mostly songs movies and documents. I'm using windows 7.
My question is this:
1.If I'll transfer the data through windows 7 by copy and paste, I could be sure i have a perfect copy? 2.There are tools for comparison Between the original data to the data that was copied?
I am seeking advice on ISO burning software....I have had only one experience with creating an ISO file and that was long ago. I want to use it to burn audio CDs and Windows 7 64-bit SP1. I downloaded ImgBurn because it is compatible with all Windows 7 versions, but before installing I would like to know if I made the right decision.
I will finally be going from Win XP to Windows 7. Does Windows 7 need DVD/CD burning software like Nero or Roxio or does Windows 7 have these built in?
I like Windows 7 but I don't like WMP. In fact I have disabled it and now use VLC player. What is the easiest way to take music from my Music folder and put it on a cd? I tried using WMP and that was a joke. Is there a way to do it using Windows Explorer? Is it possible to insert a blank cd, open it as an extra driver and drag and drop music files into it?
just need a sanity check since it has been a long time from last effort at making bootable Mac disc using windows.Is PowerISO the only viable package for doing this? I need to burn a threesome of os x 10.3 Panther for an upgrade to an oldie
When I burn a 3.5GB RAR File using Windows 7's built-in burner, it's always getting "stuck" at random parts of the process. Sometimes, it gets stuck at the middle of the process, sometimes towards the end, and etc. When it gets stuck, you will see that the rate (KB/s) will not vary and it is constant. I use a LG Hitachi GBW-T10N Bluray Combo Drive with my laptop and it has the latest firmware UN09. Why is this so?By the way, this doesn't happen when I burn using ImgBurn.
i recently installed convertxtodvd, after installation, i try to burn a movie file to a dvd disc. and after burning is finished, my windows error (blue screen appear amd it says there's some errors) and it restart by itself.after that i try to reinstall that software and the same problem occur.
I added an internal Pioneer blu ray burner to my system- burns fine on dvd-r,rw and bd-r,re in Adobe Premiere, Cyberlink Power Director, etc. Was thinking of recording HD broadcast TV in Media Center & burning to blu ray- but so far have only been able to burn to dvd, not bd-r media. Media Center prompts as if no disk is present when there is a blank bd-r or bd-re in burner. Anyone know if media center supports blu ray burning?
I have a new Toshiba Tecra R840 on Win7 64 bit. Much of the time, it is connected to a Toshiba docking station. My printer is an older, parallel-only HP LaserJet 6L. It's connected to the PC with a Dynex parallel-to-USB cable.
Here's the thing - Windows installs a new printer driver if I plug the printer cable into a different USB port on either the PC or the docking station. So far, I have three of them. What's worse, each printer driver will only print on the USB port that was used to create it. Quite a nuisance.
Can I do something to have a single printer driver work regardless of which USB port is used?
Finally got through my first day with Windows 7, must say it does get easier. I'm trying to get the programs onto my new system that I ran using XP. I've been using Nero 6 on my XP system, anything in the new Windows 7 that can burn CDs and DVDs or should I try and download Nero 6 if it works with a 64 bit system?
I have a computer which is pretty old except for the video card which is 2 years old and the psu which is literally 1 month old.Today morning my girlfriend turned the computer on and it started displaying striped flashing multi-colored lights. I turned it off immediately. When I turned it on after 3 hours, It went to start up repair then it displayed a Fatal Error BSOD. Then it proceeded to switch to flashing multi-colored lights which resulted in burning smell from the computer.
How can I get Windows 7 to name copied files using the scheme "Copy of" (used in Windows XP and earlier) instead of the default scheme "- Copy", whenever a file is copied to the same directory as the original file?In other words, if you copy a file named "Foo.txt" in a directory to the same directory, Windows XP would have named that file "Copy of Foo.txt", but Windows 7 names the file "Foo - Copy.txt". I want the copy to be named "Copy of Foo.txt".There are several reasons why I prefer the XP style file name:
1. It is familiar :-)
2. I have existing files that use the XP style file names, and I want all my file copies to use the same naming scheme. I guess I can do a massive file rename across all my backups, but that would solve only one of my problems.
3. Most of my folders are sorted by name, and using XP style would sort all copies together. On other forums it has been suggested that one can simply sort by date (to get the copies sorted together), but that advice assumes that all copies are created after all other files are created, which is actually not often the case.
4. I often work with long file names, which means that the end of the file name is often obscured, unless I have wide windows (not always possible) and use lots of horizontal scrolling every time I want to select a file. Hovering over a file to get its full name is a cumbersome solution.
5. On other forums some have given the advice to always make copies in subfolders, but I often make copies or copies of copies while I work (it allows me to roll back or to check earlier versions of a file quickly, during my work), and using subfolders would slow me down tremendously (not to mention confuse me).
I know that when TeraCopy is made the copy handler, it renames files in a different way than Windows 7 does, though unfortunately not the way Windows XP did it. Also, if one installs a third-party directory program such as Opus, it asks for a file name every time a copy is made, but I need something that simply names the file correctly immediately.
I have installed windows 7 evaluation copy build 7201 and i want to find out if i will be able to upgrade it to the original copy and how? Any suggestions?
At this moment I'm burning a data dvd using Windows Explorer. It formatted the empty dvd and I had to drag my files (more than 4 gB) to the empty dvd folder. Then it started copying the files (burning them). But it's extremely slow? It is transferring the files at a speed of about 594 kB per seconds and burning the disc this way will take about more than 2 hours?Don't know if it matters but I was using the Live File System.
When I'm adding files to burn to a CD, how do I tell when the CD is full and won't hold any more? My program on my old computer had a little line at the bottom, and each time I added one it would fill up more and more till the tip of it started to turn yellow if I had too much on.
I am having an issue that seems to be related to Windows 7.
Whenever I try to burn any kind of DVD, using any program, Nero, Cyberlink Power2Go, even windows own built in burning software, every disk fails to burn.
When I boot into my Windows XP Partition on the same computer, using the same DVD drive, discs burn fine.
Having the same problem with my Windows 7 Laptop - - The main PC is running build 7068 x64 and the Laptop is running the x86 version of 7068
at the minute i have 'imgburn' and windows DVD maker however imgburn does not add chapters to the DVDs i am making where as windows DVD maker does! downside is that windows DVD maker takes around 1 hour 40 to complete a sucessful burn!is there any other programs that can add chapters automatically but not take all day to make a few DVD.
I have Convertx2DVD and DVDFab installed on my Win 7 Pro 64 bit and both hang at the point after conversion and beginning burn.
what I need to disable in regards to Win 7 to be able to get them to work? Other people seem able to get them to work but I don't know what they did to enable the programs to work.
I use WMP to burn an audio CD, which is 700M. Each song is 23.5M. I drag about 20 songs to the burn list under WMP. It seems each song is in one track. But, when i hit start burn button, there is ONLY song being burned. Why? Why I cannot burn all 20 songs in the one CD?
Just got a new machine with Windows 7, burned 2 dvd's from avi files and they worked fine, now when i use Windows to burn a dvd from an avi (even tried one of the ones that had worked previously), I get no audio on the DVD, and it doesn't matter if I watch it on the computer or in a DVD player. The avi plays fine on the PC ..
it doesn't matter if I use a third party program or the W/7 burn image feature to burn an iso, I end up with a dvd that has written data that can't be seen in explorer. All I can see in explorer is "files ready to be written to the disc > desktop."
I copied a video file from a friend and it's a .wmv file. I just wanted to know if I burned it to a DVD on my laptop, can I watch it on my home DVD player connected to my TV? Or do I have to convert it to a different format?
I am getting a little annoyed of the BSOD that I keep getting after I burn using a convert x to dvd and I have been on this site research the problems and I have used the memtest+86 and the mem test comes out fine and i did a last know good configuration and nothing has changed and I have the blue scanner view and here is was i have been getting..
011912-15272-01.dmp 1/19/2012 10:02:36 AM DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000d1 00000000`00000000 00000000`00000002 00000000`00000008 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+7cc40 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.17640 (win7sp1_gdr.110622-1506) x64 ntoskrnl.exe+7cc40 C:\windows\Minidump\011912-15272-01.dmp 4 15 7601 262,144
Having recorded a TV programme last night on my computer running Windows 7 using Media Centre, I want to burn this prog to DVD to keep it. Why does Media Centre tell me the there is not enough room on the DVD (4,7 gig) to record a programme which is only 2 gig in size? It offers to do it at reduced quality and warns it may take several hours - anyone know why this is and if there is better sodtware out there to do this job.
Right, I was basically writing a series of files onto my dvd-r using the windows 7 cd burner (the default one). The problem is, I cut-pasted them onto the dvd.Now, this was the fourth DVD being burnt and I had done the other three quite successfully. However, the third DVD, despite deing burnt, was still showing the files as *not* burnt. The problem was that the completion dialog hadn't shown upThat didn't seem to be a problem. I therefore deleted those files (which were written successfully) and cut-pasted the next batch for the next DVD. So far so good.However, the burn completion dialog now showed up. In my haste, I clicked finished. Because of this, my newly copied files were deleted (as Wi