I want my computer to give out some wifi for mobile devices/other computers. The router is at the other side of the house so i don't get any connection down here. But my computer is wired.When I make an Ad Hoc network, it works. But when I go to turn on the Internet Connection Sharing (ICS) it says this: "Windows could not set up Internet Connection Sharing (ICS)"I have turned on Ad Hoc on my wireless network card.When i go to the ICS service and try to start it up, i get the following error:"Windows could not start the Internet Connection Sharing (ICS) service on local computer.Error 1075: The dependency service does not exist or has been marked for deletion."
I am trying to share my internet connection thru my laptop wit my ps3 but iyz not working for some reason.when I search for a network wit my game it finds the ip address but no internet connection.
internet connection sharing: No internet access!?I am trying to setup internet connection sharing between my laptop (Connected to WiFi) and my pc which has no wireless connection. I've spent a day or two troubleshooting problems such as 'LAN' doesn't have valid configuration and such, i found a solution and I've got the two connections to be able to see each other, but i can't get an internet connection to go through.I have my ipconfig /all for both computers available: (Both have had excess trimmed off to save on character limit)[CODE]
I am trying to setup internet connection sharing between my laptop (Connected to WiFi) and my pc which has no wireless connection. I've spent a day or two troubleshooting problems such as 'LAN' doesn't have valid configuration and such, i found a solution and I've got the two connections to be able to see each other, but i can't get an internet connection to go through.I have my ipconfig /all for both computers available: (Both have had excess trimmed off to save on character limit) [code]
Working with a Windows 7 home premium and also tested a windows vista ultimate machine. enabled internet sharing in the network connections area of 'network and sharing' in the control panel. Proceded to the internet sharing service to set to automatic... then set recoveries all to 0 seconds. on each machine the service stopped immediatly after starting. I write to inquire what have i missed in the proper configuration of this feature.
I have searched online for this and I am still unclear if it is possible. I have a laptop connected to my tv for watching videos. It is connected to my home network through a wireless connection. Can I share the internet with my blu-ray player through the laptops ethernet port? The blu-ray doesn't have wireless and it's too far from my router.
It was easy for me to share my wired internet connection in Vista SP1 through ad hoc network.But in Windows 7 the internet sharing option is gone... how to share Internet connection over ad hoc in W7?
i have my windows 7 laptop connecte to modem(not wirelessly), and i set up an ad hoc network so that i can share internet on the other windows Vista laptop. The ad hoc network is connected, but the internet sharing is not enabled i tried checking the "allow other network users to connect through this computers internet connection." but no luck and im even confused what should i choose as the private network connection below the option.Also when start adhoc network wizard, after entering the name and network key and next, there is no option that says "turn on internet connection sharing" i dont know why??
I am unable to share an internet connection between two computers in a homegroup.File sharing is OK. The ADSL modem is connected (via USB, no ethernet) to a desktop, the desktop to a laptop via a router. The problem is that after opening network/adapter settings/LAN/properties on the desktop, NO sharing tab appears, only a 'networking' tab. On the laptop both tabs appear...How can I get around this? I know I should really get a modem that connects directly to the route, but don't want to waste any time/money if it doesn't resolve the problem
It's "connected" on the base computer, my desktop. However, my laptop has that annoying spinning circle thingy for a bit, then shows the bars with the exclamation point.I have absolutely NO internet access because of this. I don't understand...it worked before in this same setup! Same password, same ad-hoc/computer-to-computer network, same PCI wireless card and antenna.
I have 2 systems one with windows 7 and an older one with XP. The Windows 7 machine connects to the internet through a network adapter and gets its IP adress automatically and works perfectly both in xp and in 7. The Windows 7 machine is connected to the XP Machine via a second adapter (pci) and a crosslinked cable.
Before Windows 7 IN WINDOWS XP the 7 machine used an ip like 192.168.0.1 and ICS to give internet to the second machine (which got its ip automatically)
I tried a lot of things (ex. static fixed ips enable the computers to share files but not the internet connection) but i still keeps saying its an Unidentified Network / Public Network for the second connection (between the computers)
Note: - ICS is enabled for the internet connection.
- Back when both computers had XP the second XP computer obtained its IP Adress automatically and the internet was shared .. with 7 on the second (xp) computer doesnt aquire the right adress ever.
This happened right when I got my windows 7 PC. I am sharing connection with my brother using a router, a internet box interfering with my phone line and a Prosafe 8 Gigabit smart switch. But when ever my bro loads something i lag and when ever i load something, he lags. But for some reason, when I load online games like A.V.A.and Crossfire, we dont lag each other.
Basically I'm creating an ad hoc for my other laptop to connect to a 'main' laptop that is of course connected to the modem. So can anyone explain to me why is the 'turn on internet connection sharing' is missing. I can find my created ad hoc but since internet connection is not turned on I can't have access.
With my new computer I have been using my old laptop to connect to my wireless network (since my new computer doesn't have a wireless adapter) through the Internet Connection Sharing function in Windows 7. This all worked fine for about a week but then suddenly I cannot connect to the internet anymore. I discovered that this was because the Internet Connection Sharing (ICS) service was not started. I tried starting it but I just get an error saying "The Internet Connection Sharing (ICS) service on Local Computer started then stopped. Some services stop automatically if they are not in use by other services or programs."
I have problems with internet sharing. My laptop is connected to my home network wireless, and my x360 is connected to my laptop with a Ethernet cable. Now i can't turn on ICS. I get a error message "An error occurred while Internet Connection Sharing was being enabled. The dependency service or group failed to start"
I have also checked services.msc and ICS is set to manual, I've tried to set it automatic and restarted my computer, after reboot ICS is set to manual again. Can't force start, error message "Windows could not start the Internet Connection Sharing (ICS) service on Local Computer Error 1068: The dependency service or group failed to start"
I'm trying to share an Internet connection via bluetooth.
The host: HP 8740w laptop running Windows 7 Enterprise x64 Connected to the Internet via Local Area Connection (wired) The client: Asus Transformer tablet
I have a bluetooth PAN setup and the devices are communicating properly. They both have IPs in the 192.168.44.x range, can ping each other, and I can use a Remote Desktop client on the tablet to control the PC.
The last piece I'm missing is giving the tablet access to the PCs Internet connection. I go into Network and Sharing Center, click Change Adapter Settings, and open the properties of Local Area Connection. On the Sharing tab, I check Allow other network users to connect through this computer's Internet connection. I then click the Home Network Connection dropdown, and Bluetooth Network Adapter is not listed. I see others, including my wireless card, VMware virtual adapters, VPN adapters, etc..
I've looked at the Bluetooth Network Adapter's properties, and it doesn't seem to be missing any protocols that the other adapters have. It's enabled, connected, and working fine locally. Is there a registry hack or something that I have to do to make it show up in the ICS list?
I'm switching from landline ISP to mobile ISP (dongle). So I'm thinking of sharing 3G dongle (ZTE MF190) internet connection with other PC, device etc, through D-Link modem+router(DSL-2640B) that I use for landline internet connection before. Is this possible? I notice that I cannot use homegroup via D-Link anymore after connecting to 3G dongle. I've tried ICS (internet connection sharing) but to no avail.
As I wanted to enable the ICS on my machine it tells me that I can't and that the service that is being enabled does not exist as an installed service and that is ICS.I did a lot of digging on the net about it and it's weird, but I can't find anything concrete about this particular problem.The PC I'm talking about is a work PC with Windows 7 Professional 64-bit.I don't think that someone at my work removed this service (I'm not even sure if you can remove a service) but it is missing from the list and it can't be enabled.Is there any way of manually installing it on my windows 7x64?
I have a laptop running Windows 7 and a netbook running winXP.The laptop is Ethernet connected to the internet.I have created an ad-hoc network using the laptops wireless card and then joined that using the netbook wireless.Is there a way to give internet access to the netbook through the ad-hoc network?
i'm using a broadband internet,it was working fine in windows XP and windows 7,But now,i re-installed windows 7,and re-installed the software and the driver of the broadband,then i got this error "Error 691: The remote connection was denied because the username and password combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server"
So i was browsing the internet casually, and all of a sudden my internet connection is lost ....OK, so i checked the modem connection, and all the available connections on my computer, and nothing, just error 651, I looked around and found its a bug, and someone said change the raspppoe.sys file to raspppoe_orig.sys and it will fix it, so i did, but still nothing. Please help, is there anyway around this?
Internet connection over an electrical Powerline instead of a wireless connection?is it easy to setup, reliable, fast,..?More in particular a D-Link device:DHP-307AV PowerLine Homeplug AV Kit
is it possible to make a VPN connection over multiple internet connection ? if this is possible then you can make multiple connection transparent to other applications running on ur pc.
I am using a nokia E66 to connect to the internet at home. My pc at home is running windows 7 home premium 64 bit. I am currently using nokia pc suite 7.1.40.1. All the software installed without any problems. The problem that I am having is that after I connect to the internet, I can only roughly download / upload about 5MB of data and the connection will time out. I do not get any error messages that is did timeout. The only way I know this is that I stop seeing data being transferred in Network properties.
I then open my e-mail client to see If I can connect with a POP account and then I get an error saying it could not connect to the e-mail account. I then have to disconnect and reconnect and try again. This does not seem to affect web browsing though, only when I am downloading files. Like Steam will start update and stop, windows updates will start download and stop and so on.
I initially thought it was a problem with the network operator, but when I boot back in xp (my pc is set up to dual boot between xp and 7) every thing works fine. No download time outs. Is it the nokia software that is not supporting 7 100% yet or am I missing something else?
I have 2 pcs on a LAN with a 100mbps switch, and they are also directly connected via Gigabit crossover. When both ran XP, I could uncheck "File and Printer Sharing" on each 100mbps connection, and they used only the direct crossover at 1gbps.
Now, with Windows 7 on one and XP on the other, copying files uses the switch by default, even with "File and Printer Sharing" unchecked. This is ridiculous. It should be able to see that there's a wide open connection that's ten times faster sitting completely idle. I even think that the "Local Area Network 2", not the primary.
I've tried both Comodo and ZA firewalls. I prefer either over Windows 7 built-in firewall. The problem I have is after installing either of these I have control issues with Network Discovery and File Sharing. More exactly, even though the system shows these two items are off and/or disabled (manually), Start> Computer> Network will start showing available computers to connect to, whereas, Windows 7 firewall will inform me that both items are turned off. I use a public WiFi so this is obviously not a good thing. How to deal with this 3rd party firewall/File Sharing issue? Is the fact that the 3rd party firewalls are blocking any connection attempts a sign that everything is okay? Or should I just stay with Windows 7 firewall?
Windows 7 N&S center is really slow. I have no idea what's causing it.Symptoms not present when I connect to my wireless router.But when I tether (get a connection from a USB device) the N&S Center stops responding for about 10 minutes.At some point, it will come up with the "Public Network?" box.How can I debug this?Even after the network is initialized, the N&S center is still very slow.I assume it's doing some automatic something or other that keeps pinging this, that or the otherThe USB device would serve an internet connection that has a reasonably high latency.Lots of network tools seem to slow down, especially while the connection is configuring itself. This is probably because all of the services involved are interlinked somewhere, and are waiting on the same mutex to be released or something.
attempting to connect my 360 to the network to play online/stream NetFlix. The Univ. posted this PDF detailing how to connect a console to the network. I picked up a Belkin USB->Ethernet adapter from campus IT the other day and began to follow the guide. While enabling Internet Connection Sharing from my local connection, it kept getting an error stating "An error occurred while Internet Connection Sharing was being enabled. The dependency service or group failed to start. I checked it's dependencies, Remote Access Auto Connection Manager and Remote Access Connection Manager were set to "Automatic" but both bounced back with "Windows could not start the RA(A)CM service on Local Computer. Error 1068: The dependency service or group failed to start."
