Toshiba Satellite Pro A200, Windows 7, 32 bit - touchpad driver installed does not work! I installed the original driver of Synaptics for Windows 7 but did not work ... Anybody know what's going on with my touchpad, and below its Windows Vista works properly??
View 9 RepliesI need driver for touchpad, for laptop stallite pro A200 on widows 7
View 2 Replies View RelatedI just have a couple of questions for the driver experts of the world
I have just treated myself to the Windows ultimate 64 bit (i did have vista 32 bit) and i love it but im a stickler for things not working and it drives me nuts!
1) The windows Media remote isnt working, i think this maybe due to the fact ive gone from 32 bit to 64 bit and im probably just needing a driver? not too sure to be honest, any ideas? apparently its called a "CIR device driver" or am i way off mark here? cant seem to find the driver online anywhere!
2) Toshiba flash cards are not working also, not that i use them that much but it still bugs the hell outta me! any thoughts?
P.S I have managed to get most stuff working in 64 bit including the SD card reader and built in web cam so let me know if can help you with any other stuff your stuck with.
I have a Toshiba A200 2B7, with Windows 7 32 bit OS. The problem is the SD card reader doesn't work, I suspect it's because of the driver and I can't get its driver. I've tried the official website of Toshiba but I can't seem to find it.
View 2 Replies View Relatedhave loaded windows 7 7000 on two test machines, desktop running fine. clean installs in both cases. toshiba satellite a200 runs faster than vista, better shutdown et al, but has a quality index of 2.0 due to driver not loading for mass storage controller, pci memory controller and one unnamed device under other devices.
tried loading the drivers for vista for mass storage controller and chipset under compatibility mode which installed but not recognized by windows 7.
anyone with a toshiba laptop get their msc functioning? any ideas?
My A200 has been upgraded to 4GB RAM, and Win7, worked fine for a while, then started randomly freezing with weird screen stuff (video not displaying properly). Power off only worked. Much frustration and removal of progs later, tried on safe mode - works fine. Safe mode with networking - works fine. Can plug it in (surefire way to get it to fault normally) and in safe mode it works fine, in normal mode, immediate fault.
Thought perhaps a horrible malware, did clean install from disc of win7, no change (except now, coz I deleted all the Toshiba drivers, the dvd drive is noisly lol). Can't load progs to run the damned thing properly because it won't run in normal mode, only safe mode. Tried formatting the hdd, but it won't let me (partitions) which I thought were reformatted during a clean install anyway?
Haven't tried changing the charger yet, because it works fine in safe mode, so I thought probably a software issue? Have tried minimal or "clean" normal boots, freezes immediately.
Dell Inspiron N5010, Synatpics. Win 7 Home Premium, SP 1, While typing touchpad became disabled for one user. Still works for all others. How do I reenable/reactivate. I get a message telling me it is disabled whenever I log in.
View 1 Replies View RelatedI have an XPS 17z L702x with windows7 and I want the synaptics touchpad disabled on startup. I have no idea what to do, there may be a registry value that can be changed to do this in the same way that adding two to the value at HKEY_USERS\.DEFAULT\Control Panel\Keyboard\InitialKeyboardIndicators turns NUM lock on at startup or there may be something completely different. I know that the touchpad can be disabled at startup because my computer had it disabled on startup before I had to reinstall windows and all of my drivers and programs. Everything else on my system is exactly the way it was before but I just can't keep the touchpad off.
View 2 Replies View RelatedI Use a wireless Mouse so i often turn off my Touchpad on the laptop. And since i installed windows 7 The pad stays on whether i turn it off or not. I was wondering if maybe i needed to update a driver or something.
Its a Compaq laptop with Windows 7
On my inspiron 1545 laptop is seems finger tracking on the touchpad stops responding sometimes. I'm using Windows 7 default drivers. Do you think it is a driver problem? Can I use a Vista driver?
Also on a side note is there a way I can disable the tap for mouse click on the touchpad?
having replaced Vista on my Dell Inspiron 1720 (32 bit) laptop. What I cannot do, however, is disable the touch pad - there is no mechanism in the Control Panel. I can only alter settings for the attached mouse.how to disable the touch pad?
View 2 Replies View RelatedMy touchpad is way too sensitive and I have no way to adjust it. I have a HP Pavilion dv6000 notebook that came with Vista but has been upgraded to Windows 7. I tried following other threads to fix this but my situation seems to be different. I tried downloading new drivers but the message I get says there aren't any drivers for this notebook with this OS. There is nothing anywhere on my computer that says Synaptics which I thought I had before the upgrade. I have Mouse Properties with tabs that read: Buttons,Pointers, Pointer Options, Wheel, Hardware. Nothing about a touchpad at all.
View 1 Replies View Relatedi hav a sony vaio VPCEH and my touch pad is not working. i tried 2 reinstall my drivers, enable all settings 2 be enabled 4 a touchpad 2 work. but m able 2 use a mouse.
View 3 Replies View Relatedneed to disable touchpad on dell 1735 studio with windows 7
View 1 Replies View RelatedToday my laptop keyboard and mouse stop working for some odd reason because some weird anti vurse popped up on my computer freezing it so I restarted it . I thought my computer frozen so I would restart it , but I just hooked up my keyboard and mouse and they work just fine on the laptop , but when i unplug them i can't use my keyboard or mouse to my computer. I am not sure if i pressed something to make the touchpad and keyboard stop working .Maybe I could have put in sleep mode or something.
View 2 Replies View RelatedI do not like at all using my touch pad with my laptop as i have lost more stuff doing that. Typing along and it somehow highlights everything and if you aren't watching and aren't fast, the next key stroke zaps everything.So I found before on my old lap top that the fn key and the f3 key together will work as a toggle (that sometimes irritatingly toggles its own self) to turn touch pad on and off.On my new laptop I found it had a control to completely disable the touchpad which was way cool, one time, done. Now amazingly enough the control is not locatable and the touch pad is activated and the fn f3 fix does not work either.computer manufacturer says restore to default settings but I don't buy it there has to be another way as that will wipe out all my settings and more?
View 9 Replies View RelatedI think this is driver related. My Dell laptop touch pad is working fine for moving the pointer and clicking but the scrollbar for web pages etc. that runs vertically down the left of the pad does not function at all. I have had a look around the Device Manager but I cant find the pads entry to update it. Perhaps this is just something that is incompatible with Windows 7...
Does anyone else have this problem?
Monday afternoon I turned my computer on and noticed that every two minutes or so the computer would freeze up for up to 15 seconds, after which I had another one-two minutes of uninterrupted use and then it would freeze again.
The Computer Dell Inspirion Laptop E1705/9400 Windows 7 and Windows xp 40gb and 120gb HDD 1gb ram Dual core (centrino?)cpu need more info? ask.
(only on Windows 7)I'd done two major things in the past week and neither one of them could have had caused this because there'd been so much time in between. The first was I networked a couple folders on my hard drive so they were accessible on the rest of my home network (on Friday). Second I'd installed GIMP on my computer (Saturday night).
(only on Windows 7)I did a restore point from about a week ago, still had the same problem, then I tried uninstalling GIMP and turning off file sharing, still nada.
I thought maybe it was a software problem and because I had a website due in a couple hours I thought I'd swap out the Windows 7 hard drive which I was using and instead use a hard drive with Xp, Oddly enough all the problems I've mentioned up to now and the problems I'll mention persisted on both platforms (unless otherwise stated), also note I hadn't used Xp in months (about 3 months ago was the last time I'd used it in a computer.)
After messing around some more I noticed that my touch pad wasn't working at all (I'd been using a external wireless mouse until then) The drivers somehow uninstalled themselves and pretended to not work when I reinstalled them.
The only thing that kinda worked was booting in safe mode, then the courser would freeze but not anything else. When you look at this with the fact that the touch-pad doesn't work and the problem persists cross-platform, it begins to look like a BIOS or hardware problem, not a software thing.
Other Weird Phenomenon
(only on Windows 7) Stumble Upon doesn't show up in the toolbar even when it's enabled and checked off as supposed to be there, in Firefox.[this one is just weird... it could be that I updated it and didn't realize and it's not playing nice with some other add-on, I'll look into that.) On screen keyboard also wont work in safe mode while courser is frozen (but mouse isn't). When I access files through file sharing from a different computer they are also subject to freezing, meaning that if I have a HTML file open in notepad ++ ( that's on the laptop) every two minutes or so it'll freeze up for 10-15 seconds.
I have upgraded a HP dv2000 (HPdv2171cl) to Win 7 and now I have a touchpad problem. I have installed the HP Vista driver and the Synaptic driver trying to get the touchpad to work, as well as scoured this and other sites for advice. The touchpad is jerky and the scrollbar on the side is not functioning.
The only thing I can find that is out of place is that under device manager, there is listed "other device" Unknown device.?
any ideas?
i have msi gt628 notebook and i installed there Windows 7 x64 but i'm unable to scroll with touchpad . Windows is recognizing this device as wheel mouse and on msi web there is written that windows has implemented drivers for pointing devices so there is know driver available. i have already tried synaptics driver v13 for vista x64 but it didn't helped so i will be grateful for every piece of advice.
View 2 Replies View RelatedI'm new to windows 7. I installed it on my Dell Inspiron e1505 32-bit. I have a question about my touchpad. I can't seem to scroll using it as I use to like I have before. I tried downloading the driver from Dell but I need to install microsoft framework 3.5 sp1. in order to get drivers from that website. Can anyone tell me how I can get the touchpad driver.
View 5 Replies View RelatedI just installed Windows 7 Home Basic on my wife's laptop. Everything is working great except that the scroll feature on the touchpad does not work. I checked Device Manager and it says it has a PS/2 Mouse instead of a Touchpad, so I assumed I am missing a driver. Here's the issue. I have tried about 8 or 9 different variations of the ALPS and Synaptics drivers for Windows 7, all with the same results.
Everything works great after rebooting, then shortly after, the scrolling will become erratic, and finally the cursor will lock up and the machine will start beeping. The keyboard continues to work, but no mouse functionality whatsoever. I think I just have not found the right driver for this...the one I had previously installed was for XP so I don't think it will work under Win 7. Does anyone know where I can get the right driver for this laptop?
I turned of my touch pad using 'FN+F9' and now my 'FN' key is spoilt. Is there away to turn it back on without the 'FN' key?
View 3 Replies View RelatedI just installed windows 7 ultimate on my daughters, acer aspire 3050 laptop. It was running vista home basic before. The vista install was damaged by viruses, so I decided to upgrade her to 7. All the hardware was recognized, but for some reason the keyboard does not work, it was working fine with the virus riddled vista install. For some strange reason the windows key does bring up the start menu, but none of the other keys seem to do anything.
They all work in the BIOS just fine. Also the touch pad does work, but the cursor movement is very jerky, and it was also fine in vista. I went to acer's site, they don't have any windows 7 drivers available for this model, or any vista drivers for the keyboard, I installed the vista touch pad drivers, but they did not seem to help. I also messed with the keyboard settings in control panel, but nothing seems to help. Does anyone have any ideas, on what I need to do to fix this. I have been really pleased with 7 on my other computers, and would hate to have to go back to vista.
I have a DELL XPS M1530 laptop that I just installed a full version of Windows 7. It had Windows Vista on it before. It is a replacement computer for my old DELL (same model) that was having issues.I usually hook up a bluetooth mouse when I use my computer, but I just noticed last night when I was using the touchpad instead, is that it does not scroll up and down, or left to right. The mouse part of the touchpad works fine, as does the left and right buttons.
View 9 Replies View RelatedI want to make use of the gestures that windows 7 has support for, especially the two fingered ones, but I am just using a normal inbuilt touchpad on my laptop. Is it possible? The make of the trackpad isn't synaptics, it's ALPS.
View 3 Replies View RelatedI just installed Windows 7 Build 7600 and I am trying to get the touchpad scrolling to work on my Dell Inspiron 1420. I installed the synaptics drivers from their website (v10.1.8 x64) but when I go to mouse properties and click the synaptics tab it only allows me to configure the right and left click buttons. How can I configure the scrolling of my touchpad? I NEED it!
Also are there any iTunes guru's out there? I have my library all setup on my vista partition. Is there anyway I can get my library/playlists on the Windows 7 side. I don't want 2 copies of my music, I want it to all link to the files on the vista partition but I have a feeling I will have trouble either getting the playlists in or trying to gain access to those files on that partition.
Been having a problem with my laptop recently and when I turn it on the keyboard and touchpad don't seem to be responding but when I go into safe mode this is working. Also when trying to run system restore this is getting the the finalising stage and then doesn't actually work.
View 4 Replies View Relatedmy laptop's right key below the touchpad at times needs to be clicked more than once to respond..but recently d right key stopped working with d touchpad when used together..like fr selelction of text nd stuff..
View 1 Replies View RelatedI'm completely stunned. I've been using Windows 7 since the early 6xxx builds, now I'm on the latest build and I've noticed a very odd behaviour of the mouse cursor or the touchpad (don't think it's touchpad related)
As always I'm using the one click to open files and folders option, with underline icons only when I point at them setting. And like never before the icons are selected/marked (like for deletion or name change) instantly after the cursor is above them.
To make it more clear; normally when you use the one click you need to point the icon and wait about one second or click for the icon to be highlighted in my case there is no time delay.
It's very frustrating cause when you browse a drive with a lot of folders you can accidentally grab them and move inside another folder on the drive + it is almost impossible to mark/select files or folders for deletion when you're using Ctrl to select a few files in the folder cause when you move the cursor to select another file all the files that the cursor meets on it's way which are not intended for deletion are selected.
It's driving me mad, where to look for a solution?
When I press the same button many times, entire keyboard and also touch-pad are getting stuck (not responding anyhow), but the Bluetooth mouse is functioning fine. Whatever I try can not fix it! The only thing to do is to restart the laptop, after restarting forking just fine, unless I start to press the same button many times (like if I will delete something with Backspace key, it is getting stuck)
View 3 Replies View Related