Safe To Install SP2
Oct 8, 2009I have Vista Home Premium 32-bit. Is it safe to install SP2 yet? I scanned the first six pages of posts, and there was no mention of SP2. So it looks as if there are no problems
View 9 RepliesI have Vista Home Premium 32-bit. Is it safe to install SP2 yet? I scanned the first six pages of posts, and there was no mention of SP2. So it looks as if there are no problems
View 9 RepliesLast week, I was unable to install Microsoft updates. They failed every time. I overcame this by doing a system restore to an earlier date before the previous updates. They then installed. However I was left with Microsoft Net framework 3.5 Service pack 1 which failed to install. I went to Microsoft download site and downloaded from there. The my troubles started, in that now on opening my machine it tries to configure these updates and says on screen "configuring 3 of 3" gets to 87% then closes automatically and restarts the process overagain. I tried to open in "safemode" but exactly the same thing happens. Is there anything I can do to stop this, or am I forced in to doing a restore to factory settings, or I note that I have another option of "last known good configuration (advanced)". As I am not advanced this causes me concern.
View 6 Replies View RelatedVista Home premium, SP2. HP Pavilion Notebook. Have to run in -SAFE mode with networking- for next week till new hard drive arrives.
I will then install it as my computer will not boot in normal mode. HP Warranty is replacing hard drive.
But as an aside, I can access my hard drive and copy files to my external HDD.
In the meantime, I wish to use the Internet to access audio via HULU or other sites.
How can I manually access my audio while in safe mode?
is it safe to install Windows Updates logged into the machine as standard user (as opposed to a Computer Administrator)? Up until now I have always logged into the machine as the Computer Admin specifically to install updates - but is this necessary?
View 7 Replies View RelatedUsing my ISP (Roadrunner Carolinas) speed test site; I get around 200 to 400 kbps download speeds using IE in normal mode. If I boot to Safe Mode, I get around 3500 to 4500 kbps, which is what it should be (this is what I used to get in normal mode before I re-installed Vista). Running the same speed test with Firefox, I get around 1500 to 2000 kbps in normal mode, but if I try to download a file it ransfers at only the 200 to 400 kbsp rate (if I'm lucky). Here's more detail about the system and what I've done so far:
Installed all updates including SP2.
Using Windows Firewall, no anti-virus.
Updated network drivers directly from NVidia (Chipset is nForce750i)
Updated graphics card drivers directly from NVidia
Disabled all LAN protocols except for Client for Microsoft Networks and IPv4
Connected via ethernet cable directly to cable modem, no router.
I've deliberately refrained from loading anything but the basics until I can get this sorted out..........
is there a way to tell if i have IE-7-or8- I was reading in a windows guide about IE7 and how safe it was ,this is a new computer (2 months old) and user I want to run it the best way--any and all infomation will be well heeded
View 9 Replies View RelatedI've tried and tried, please I hope you can help me. I have a Toshiba A215-4817 laptop with Vista Home Premium 32bit. My troubles began when my cd/dvd was not operating properly. Toshiba support said my operating system was corrupt. I didn't believe that just because the cd/dvd wasn't working properly that the os is corrupt, maybe they were right.
I have extremely important info on my hd as I do taxes for a living.
In an effort to trouble shoot the cd/dvd I booted into safe mode. No-one tole me that the administrator account is disabled by default! So now I can't get out of safe mode. I have access to only my limited user account and uac is enabled. System restore doesn't change boot options.
I can't edit registry = access denied, cmd.exe when trying to activate administrator account = system error 5.
i'm on windows vista and i can't get out of safe mode does anyone know how to x
View 9 Replies View RelatedMy son kept shutting the laptop w/o powering down and now it starts in safe mode. The first time I rebooted and this solved the problem but now that won't work. I can't get it to go back to normal. This has happened in the past but I can't remember what I did to fix it.
View 9 Replies View RelatedI had an issue with one of my games and it directed me to go into safe mode to uninstall it. Now that it's uninstalled, I can't get out of safe mode. I've been through this forum in and out. I've done nearly all the things that it has stated that come close to my issue. I'm still in here. I've been in and out for 3 hours now. I've gone through the msconfig, and told it to restart in normal mode, I'm still in safe mode. I've used the F8 button while starting it, and told it to go to safe mode, I'm still here. I've even checked to see if it was the resolution, I've set it to my default settings of 1280x720, and restart it, it's still in safe mode. I've done EVERYTHING that I can think of.
View 6 Replies View RelatedI press f5 or is it f8. but either way I get to the Safe Mood Selection screen and no matter what option I select, Safe Mode or Safe Mode with Prompts, of Safe Mood with Network support, it doesn't matter it boots normal to my user sign in screen and then it freezes.. no mouse or keyboard functions... If I run the recovery disk and tool options then mouse and keyboard work but I still cannot boot up in safe mode nor can I boot up normal.. I just need to get into safe mode and then I believe I can resolve this but since I can't get into safe mode I don't know what else to do?
View 9 Replies View RelatedThe svchost seems to be spiking my physical memory at startup to around 80%.. and it only drops to around 75% And i also know that my computer cannot run to about 93-98% on memory because i suspect Faulty ram from previous problems of mine.( I will be replacing it with 4gb in 1to 2 weeks) Also after disabling Pc tools threatfire & Pc tools firewall i seem to be getting alot of processes which are also playing with my phiscal memory %. b4 i uninstalled The pc tools programs there was only 2-3 svchosts.exe now there are about 13 of them..
Name Memory(underneath each svchost are the services)
svchost.exe 1628
DcomLaunch, PlugPlay
svchost.exe 1984
RpcSs
svchost.exe 3708
WinDefend
svchost.exe 3516
Audiosrv,Dhcp,Eventlog,Imhosts,wssvc
svchost.exe 40348...................
Where can I get screensavers that are totally safe and not going to bombard me with a bunch of ads and other things that I don't want. I am particularly interested in one with animals. am willing to pay if it means it is safe.
View 9 Replies View RelatedI had trend doing a new scan a more complete one while it was doing it i went in i could stop it hit cancel stop safe box and computer wouldreturn to normal I thought that was 6 hourds ago well after i deletedtrend it still in a safe mode.
View 9 Replies View RelatedI can say is I changed trend to do a real good cleaning of all of folders etc. When I got the safe mode I found trend was doinmg a scan so I stopped it and then it said close and stop safe mode which I did. I also deleted trend to. I m really bad I dont know what I did. I use that I had brain surgery and I m just dah sometimes.
View 5 Replies View RelatedI have a new motherboard (abit nh-m2sv), X2 +3800 processor, 2 gig pc4200 memory ATI graphics, DVD RW, Maxtor SATA drive, all are suppose to be Vista ready, but vista either won't install, or installs with BSOD's then will only run in Safe Mode.
I have tried Home Basic and premium, the same issue, I install my old faitful XP and it goes straight in. I have run memtest, all fine, I have removed the gfx card, no change, I have tried an IDE hdd rather than a SATA no change.
Vista will not boot into Safe mode or Normally. The mouse pointer sits on the screen and can be moved but the logon screen does not appear. When I go into startup repair it says it "Could not detect a problem". I have run a chkdsk /f which ran clean. What else can I try to make the logon screen appear?
View 5 Replies View RelatedI?m have a troubling issue with my computer as it is stuck on a cycle boot when it passes the windows loading screen and then it simply restarts and does a POST test again. I tried pushing F8 key and selecting all the options
safe mode
safe mode with command prompt
safe mode with networking
Go to last working configuration (advanced)
Start Windows Normally ect....
but as I selected safe mode all the windows emergency drivers are loading then the screen go black and repeats the same problem above. I don?t have a cdrom neither an fdd only a usb flash drive.
I have a dell laptop with Vista factory installed. The other day is stopped booting and it can not repair itself. I am attempting to get into safe mode to check a few things out. However pressing or holding F8 while rebooting does not work for me. I have tried about 50 times. If I can not get windows to load are there any other ways through the command prompt or something to get windows to load in safe mode?
View 6 Replies View RelatedIs there a way to make 'Safe Mode with Networking' actually network?
View 5 Replies View Relatedwhich anti virus is best and doesn't makes PC slower.the problem is disk cleaners or anti viruses sometimes removes some vital system files or registry keys or some programs after virus scan don't work.for example my Kasper anti virus deleted a file as torjen than blue screen started to comes after booting and couldn't able to boot vista again so had to format it.looking for a anti virus that has everything and doesn't have risk after deleting the files that it detects as virus or Trojan.
View 6 Replies View RelatedI find that my few graphics intensive games run much better in Safe Mode. Problem is there's no sound. Anyway to have Safe Node start with sound?
View 6 Replies View RelatedI am running Vista home Basic SP 2 and ( Emachine Desktop) Vista Home Premium SP 2 (Acer Laptop) when ever I come out from safe mode back to normal Windows it all ways opens with Windows Standard on both< is that normal? its no big deal to change it to vista Basic or Aero or anything else just curious is that the way it goes?
View 5 Replies View Relatedwhen I boot into safe mode, I am unable to do anything, install, open folders as nothing works, I have no error messages, just nothing works, if I take out 2 gigs leaving me with only 2 gigs everthing is just perfect I have tried installing the hotfix that I see on the forums "Windows6.0-KB929777-v2-x64.msu but it gives a error saying that its not for my machine I am running buiness edition Vista 64 Apart from this my machine runs just fine and for the last 6 months, only the safe mode gives me problems with the 4 gigs
View 5 Replies View RelatedI know you guys have heard again and again, "my computer will only boot in safemode, And yes I have seen it many times before but this is the first time I was never given a choice to the matter. When the computer boots it goes right for safemode even if I press "F8" select Boot computer normaly and it will still go into safemode.
View 8 Replies View RelatedI use PeerGuardian 2 on my XP box to keep out unwanted IPs, such as those that would drop a mess of spyware onto my computer. There isn't yet a download for a fully completed version of PG2 for Vista, but there is an RC1 out. Does anyone know what the risks are of running this version? Link to the PeerGuardian 2 client
View 5 Replies View RelatedNot sure what hapened, i'll summarise here:
1) Installed Vista Ultimate - all worked fine no issues - besides not bieng able to detect more thn 9 channels.
2) I removed my Kworld DBV-T driver after having restarted and it detected
the panasonic chiset driver.
3) Restarted again recieved 0x0000007e,
4) Safemode and i got 0x0000008e
5) Tried to restore last known good config i got STOP: C0000218 (registry file failure)
So now i cant get to safe mode - i cant try to put in Vista DVD & choose repair PC - as soon as i do, i recieve 0x0000008E
I have a computer I can only boot into safe mode. I recently rebuilt a cannabolized HP computer and I cannot boot the machine into windows. I have tried three different, working, hard drives on it, but have had no luck. One of the drives is the original to the machine and runs Vista Ultimate 32bit. Vista booted suceessfully prior to the cannabolization. The second hard drive runs XP Home and also boots into Safe Mode only. The third hard has no OS so I tried installing a commercial version of Vista which was unsuccessful. Computer would crash. I ran a few hardware tests and the memory, cpu, optical drive, and hard drive check out. I don't think anything is wrong with the motherboard as the computer worked fine before. The computer is stable in BIOS setup, and when booting to optical disc. No POST errors.
The hardware I added should be compatible with the motherboard (M2n68-Narra2) as I checked with HP website. The hardware I added: Antec 500watt power supply, DDR2 8Gb Ram, Sony DVD drive, Samsung 640Gb HD, Thermaltake CPU cooler, AMD X2 5600+ processor. I am out of ideas on how to make the computer boot into Windows
turns out that most likely the culprit for my computer acting different is because of Microsoft Office. The problem I have is with not being able to get microsoft updates, open control panel, etc. I went into safe mode and tried to uninstall, but it would not let me. So I cold deleted from the program files folder. However, now that I'm in regular mode, my computer is still acting like before. How do I resolve this?..
View 4 Replies View RelatedI am stuck in safe mode and can't get out.
View 4 Replies View Relatedevery time my computer boots up in goes in safe mode...i tried restoring to earlier point...tried last know good configuration....tried repair computer...nothing is working.
View 4 Replies View Related