I have a Dell Inspiron 1720 with two internal hard disks, 160gb each. Disk 0 holds the C drive with Vista and all my apps, photos, vids etc. The same disk also has the E drive for system restore and a couple of very small drives whose functions I know not. Disk 1 has only one drive, D, which is solely for backup. It's filled up and no longer accepts data, so I recently bought a 1tb Seagate FreeAgent external drive, designated H, to take over backup functions. It works fine. I now have my C drive copied onto H and can safely delete the D drive contents. I want to use D to share duties with C, which is about 3/4 full.
Questions:
- How should I empty D? Drag all its contents to the recycle bin? Format it? Both?
- After D is emptied, how do I tell Vista to send new content there? Does Vista do that automatically? Should I wait until C is filled up before sending stuff to D, or should I manually transfer some there right away, so each drive will be about equally full? How can I make the two disks function as a single C drive?
The Hard Drive LED light on my Sony Vaio keeps blinking EVERY SECOND. When it's really quiet I can hear it too, it's constantly writing. Constantly. I did my research - read all the threads on the net and so far I have disabled:
Windows index Windows defender Windows search Superfetch System Restore Readyboost Defragmenter I have uninstalled google desktop.
The system is totally virus and spyware free, and the anti-virus is not scanning (schedule scan disabled). All Vista updates are installed. Nothing has helped. I've run out of things to disable. I'm running Vista Business SP1, Dual Core 2.2 Ghz, 3 Gb RAM.
I have a ASUS laptop running Vista Home Premium, 64 bit OS. I have several programs that I use but no loner have the insall disks for. Should I have to reformat in the future I would hate to lose them. Here's what I'm thinking: Buy a extrenal hard drive. Seagate, 1Tbit, usb, cost $90.00. Copy my hard drive to it. If I need to reformat. Reinstall Vista from my recover disk that came with the computer. Then copy files from external drive. Bingo. All my old programs would be there and working. Question is: Can this be done? What file/folders do I need to copy to the external drive?
Is it possible to copy my entire hard drive onto an external hard drive. Vista Premium, all the data, etc. and what would be a good software to accomplish this?
I have an external hard drive, I reformated it so I could use Vista's backup.Now it seems that when my brother inlaw tries to put some music files(Itunes) that the hard disc is unavailable to his computer. At this stage it seems that Vista has conned me into destroying a perfectly good WD harddrive!I have created a second partion on the hard drive and I am reformatting that, as I write this, but the only formatting option seems to be this NTFS, and that is what I had already formatted the ExtHD to so I think this formatting will be to no avail!From what I can figure I need to format into FAT but I tried a quick format an ex-fat option was there, but the problem was the same. I am becoming more frustrated with Vista, seems I just keep running into things that should be simple and aren't!
when booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
I was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
i bought a kit for an old hard drive. i got it to work once ealier today, and now it doesn't work. when i plug it into the usb, it will not successfully install. the kit is a rocketfish hd 35, the hard drive is seagate u8 model st313021a. the "remove hardware" icon appears in the tray, but no designated lettered drive appears on the computer.
the hard drive was part of an older tower that i couldn't get to boot. it's strange because just today i accessed the hard drive and located old pictures, music and other files that i hadn't seen in a few years. had i known this would have happened i would have started saving right away. i thought i had it working.
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
I was starting my computer today (that has Vista), and during the start up process, a black screen came up stating that there was an error opening up my external hard drive and it was checking for errors. After it finally booted up, I went to open the hard drive files, and it was totally BLANK! I then restarted the computer, and still the hard drive is EMPTY! I had ALL my important files in there!
The ONLY thing that looks promising is that when I go to Start then to Computer, it shows the hard drive there, and it still shows that 43GB are free of 111GB of storage (same info shows by right clicking on it and going to Properties). Why would it show this if nothing is on the hard drive anymore? Is there ANYWAY to recover these files again you think???? I NEED those files!!!! Remember that the hard drive STILL PHYSICALLY WORKS. It's just that I cannot access the files on my pc at the time for some reason.......
I just bought and installed a external hard drive. I am fairly knowlegable about computers but this is my first Ex. Hard drive and know very little about there use. So what I want to know is how to save my Family Tree Makers files to it. And once I do that how do I know for sure it is opening from my new drive and not my computer C: drive? I saved it to a DVD one time but when the time came when I needed it all that was there was a short cut but no files.
I went into the registry to remove a file that said I didn't have permission to edit (even though I was the admin) because the person whose help I asked for told me that was how to fix it. So I went into the registry and deleted the files in the registry (about 3 or 4 keys). But the files were still there. So I deleted the key that was show in the details section of the UAC. That didn't seem to do anything either. So I quit.
Now, once I restarted my computer, I can't use many of the basic functions of vista. I can't move, copy, cut, paste, or rename files. I also can't empty or restore the recycling bin. For example, I can't rename a txt from the folder, but if I open it in notepad I can save I as something different. I remade the key from the UAC but going into the registry editor and making a new key and entering all of the information, but it didn't correct the problem. That key is {3AD05575-8857-4850-9277-11B85BDB8E09} by the way.
After upgrading to x64 my mouse no longer functions as anything but a 2 button mouse with a scroll wheel. Logitech says that the Vista Native Drivers are sufficient to use but they are not. I have always used Mouseware which allows me to select the wheel as double click and the other buttons to be set for what I wanted. In one of the threads in the Developer newsgroup I saw that someone named Choli had found a solution but she was a guest and never replied when someone asked her for the solution. Does anyone know the solution to getting Mouseware like driver(s) to give this mouse the same functions?
I would like to know if it possible to stop certain functions to cease operating, because when I store a picture or photo, it is stored in these locations:
1/ windows photo gallery 2/ pictures 3/ windows media center 4/ picasa ( the one I prefer )
I have Windows XP and Vista. I always go through "safely remove hardware" before pulling off USB drive on XP. However, I have been trying to do the same on Vista, it seems that I cannot do the same as XP. For instance, I plug in my USB on Vista and it appears as H drive on Vista, when I am ready to do "safely remove hardware", I don't see the device drive H is on the "Safely remove hardware" window, so I cannot stop the H drive. I am concerned about the Vista hardware.
It all started with failed updates. Then I discovered that I couldn't run the check disk utility. A friend finally gave me a solution sfc /scannow in DOS which told me I had some corrupted files that windows couldn't fix. It told me to check out the log - but I couldn't find it. Now I discover (Having read a thread in VistaForums about the update error code 80070652) that I no longer have tabs in my Task Manager. aaaoorrrgh! I going nuts. how to restore these functions without losing all my data and updated drivers etc. (I'm not a beginner but I'm a sort of low level intermediate)
I've been getting this error message when I try to open certain control panel functions from the RUN command line or through the MMC console itself. Other functions like performance information, user accounts and parental controls don't respond when clicked. Windows update might flash up the beginnings of a window for a split second but wont load. I've got the update icon on my task bar saying it cant update. Other than some key function being inaccessible the PC runs fine (apart form Firefox has started crashing out every now again) I can install software ok.
I've run the SVG /scannow thing and it found no problem Its my home PC sp I am setup as administrator. This problem is effecting another vanilla admin account AND the hidden Admin account. I've virus scanned in safe mode. System restore went through the motions but after it had restarted the PC it said it couldn't actually restore........
i have an older maxtor 250gb ide hard drive and i am trying to put it in my computer so i can reformat it and install vista ultimate, the thing is when i go to disk manager i can see the drve, feel the drive, but it wont let me initialize it or anything, it comes up as "the request could not be performed because of an I/O devise error, the disk was originally in my modded xbox and i could acces it with xp.
I purchased a new hard drive and named it NEW-BACKUP. I did a exact disk copy from my old BACKUP drive. My wife uses the old drive now. I have renamed my new drive to BACKUP. I am doing complete system backup's pretty frequently. To verify that the backups are happening, I typed in the command "wbadmin get versions" and got a list of the backups. The disk name showed up as "NEW-BACKUP". "NEW-BACKUP" is the destination drive for the backup and renamed as "BACKUP.
I just inserted a SD/MMC Card in my laptop, and it changed my external hard drive letter from F to G?, how can I change it back to F again?, as I had everything setup on the FRIVE, now nothing recognises it?
I just installed a new hd WD500g sata to my box. Vista "sees" the new hd in device manager, but doesnt see it in "my computer. It is freshly installed and straight out of the bubble wrap,I was thinking gee, maybe it needs formatted...but i dont see that option anywhere...maybe im missing something.... i donno...first time i've run into this....usually the drives are "seen" right away.....
I recently bought a western digital 1TB hard drive which I had to reformat before I could use. Everything works good now, except for onething. Sometimes the computer doesn't want to restart while the new drive is plugged in. If I remove it from the USB port prior to restarting, it will restart just fine.
It shuts down and turns on without an issue. This only happens when I restart the system with it plugged in.
i just bought a new laptop and the 140 gig hd came partitioned into (2) 70 gig drives. Is it possible to enlarge the C drive and shrink the D drive at the same time?
My current C drive has a corrupt system on it (Vista) It needs to be formated and the system reinstalled. I am considering installing a larger capacity drive as the primary (C) drive , install the system on that and use the current drive as extra storage space while keeping some of the data that is currently on it thus not reformatting it. My question is, when the computer boots will it automatically boot to the new C drive or, as the system will now be on both drives, will it confuse itself?
Also. as my system disk is from from the mfr of the computer, I believe it does not have any of the Vista service packs on it. Once formated with this disk should I then get SP1 and SP2 and install them? In that order I presume or will SP2 alone suffice? Where can I get SP1 and 2?
I am contemplating getting a new Hard Drive (bigger, of course by a large margin!) and with the problems I have had with activation in the past, despite being a bloody genuine copy (calm down, Philip, calm down) - how can I go about activating on a new hard drive without experiencing the same c**p I have in the past (last one just needed to type in serial and it was activated, but the 2nd time I had to go via Indian call centre and was on FORTY FIVE MINUTES FFS !!!!....calm down, lad...calm....) So....is there a way to avoid chatting with Sanjay in Bangalore ?
I've just finished my friend's new pc today and I will be using the HDD from his old pc in the new one. Now I was wondering whether I can just install the old one in the new pc, or whether I should format it to delete everything. There's windows XP on it.. So, can I just take it out of the old one and plug it into the new or not
last week i was recoding some video's using Nero's Recode program (sidenote worked great) but now my 100 gig laptop on has 2 gigs of space left from the original 60 gigs free space. where did it go?? the video files have been deleted, i've used the disc clean-up program to remove the temp files and used the registry to enable Pagefiles removeal from another post of this forum. that clean up some on the space i now have 20gigs free space but i still am missing 40 more gigs that i have before i starting the recodeing.
in my disk de-fragmenter is shows me that i have a huge "yellow" portion of paging files still left and by just guessing it should be that extra 40 gigs just by seeing the size of the "yellow" bar.
how do i get rid of these "paging files" and how do i reclaim my lost space?
