I'm attempting to set up a new PC with RAID 0 using Vista x64 Home Edition Premium. However, I'm having no luck. (Hours of scouring various forums have yielded nothing as well.) I've set up 2 RAID 0 partitions across my 2 SATA drives using Intel's Matrix Storage Manager. (CTRL + I thing at boot) When I load up Vista for installation, it recognizes the partitions but refuses to let me install on them. I get an alert at the bottom of the screen saying that my "...computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
I'm not completely clear on what this means, but after entering BIOS, I have my drive configuration set to configure SATA as RAID. Attempting to continue the installation yields something like "Windows cannot find a drive that is suitable for installation" (not verbatim, sorry.).........
I'm attempting to set up a new PC with RAID 0 using Vista x64 Home Edition Premium. However, I'm having no luck. (Hours of scouring various forums have yielded nothing as well.) I've set up 2 RAID 0 partitions across my 2 SATA drives using Intel's Matrix Storage Manager. (CTRL + I thing at boot). When I load up Vista for installation, it recognizes the partitions but refuses to let me install on them. I get an alert at the bottom of the screen saying that my "...computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
I'm not completely clear on what this means, but after entering BIOS, I have my drive configuration set to configure SATA as RAID. Attempting to continue the installation yields something like "Windows cannot find a drive that is suitable for installation" (not verbatim, sorry.) I have downloaded all of Intel's drivers for my motherboard and have even hunted down the RAID driver for my HDDs. I put all of those files onto a USB drive, but Vista doesn't seem to recognize any of them.
I bought a laptop HP Pavilion DV9428, AMD Turion X2 2.2GHz, 2 Gb RAM, 2 x Toshiba 120Gb HD (device manager says SCSI !) I would like to mirror my main HD to the 2nd one in the event of a HD failure. I searched in my owner's manual and in Windows help file and could not find any information on how or if it can be done.
what exactly is RAID MODE. i mean i have seen it in my BIOS and all. can u guys check my HDD and see if it supports a RAID SETUP. i heard you can get better ratings with RAID. right now it is just hooked up via sata cable. Newegg.com - Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive - OEM
I posted in another thread with a similar topic. In that thread i got my SATA drives setup in a RAID 0 configuration. Now i would like to setup my 3 IDE drives the same way. I am using a VIA software RAID utility for my SATA's. I have no idea where to start. I searched the internet and it seems most of this is only done with Linux boxes. Can anyone point me to a tutorial on how to setup an IDE RAID 0, Right now in my BIOS i have the SATA ports set to RAID and not IDE, will this make a difference? I have 2 drives on one IDE bus and 1 plus my dvd drive on another IDE bus. Both buses connect to my motherboard. How can i get my IDE drives to show up in my VIA RAID utility?
I understand this can be done online. The information says that I need the Anytime upgrade disk to complete the process. Is this so? Sorry to be stupid but need to know the steps involved. If I dont have an anytime upgrade disk, how do I get one?
I've been trying for a while now, to connect 3 of my computers in a small home network. As far I understand all I have to do is have a wireless router. and then put all 3 computers under the same workgroup, then they should be able to see each other. I do have a trend micro firewall, which I put under the profile small home network.
How do I set up Windows Mail from my home computer.I'm not able to go any further as I'm not sure where to find the POP or whatever the code I need is.Am I even eligable to have a microsoft account?
I have three desktops and a laptop connected to a linksys router connected to a comcast cable box. The comcast system uses a WPA encryption which cannot be changed to WEP as they do not use WPA. I have system 3 shield (iolo) system guard, antivirus, firewall, and the Vista ultimate firewall turned off. I see an unknown computer named FISHY (IP 192.168.1.139) with unknown gaming files on my home network. I have renamed the network on all of our computers and still this unknown computer shows up using MSHOME. I've enabled the Linksys router to acept only the IP addresses our computers, and to deny the IP of FISHY to no avail. How do I remove the FISHY computer. If I turn off the file sharing or discovery all that does is make the FISHY intruder become invisible but they are still there on the network. The shared files on FISHY say Desktop.ini so they are hacking into my system, how do I stop?
In our Language School we have a Multimedia Language Lab (allowing the school students to access through user name and password an internet platform to do the exercise work after each class lesson). This system uses Windows Vista Basic as operating system and is based on a 802.11a/b/g Wireless LAN.
1.It is possible to create a Vista Install DVD allowing ??? in case of serious problems with the hardware on one PC ??? to format the hard disk and reload the Operating System, Configuration, Programs and LAN configuration (not exceeding 2 or 3 GB of disk space for the image) just by loading the Install DVD, without the need for calling any expert to solve the situation. I have to explain that recently a similar situation occurred and it took three hours of an expert???s time to reload the whole configuration and programs on the PC concerned.
2.If the answer to the above point is yes, what are the simple steps to follow to achieve what described at above point 1.
It has been years, we have been transferring files between our home PCs and Laptops in our home network. But as we updated our Laptop with Vista SP1 & SP2, the network has become a one way only. We can transfer files to the rest of the network PCs, but the Vista Laptop does not let us in. We do see it listed in our network.
We had to re-format the laptop drive and as we loaded the Vista back again, we were able to transfer files two way, but as the SP1 and SP2 update was loaded, file transfer has become one way only. Did go through the setup on the Laptop drive as we did before. What are we missing in SP1 & SP2 updates?
I need to know what would be the best optition for top performance.
Raid Settings
RAID 0
128KB Strip
It said in raid settings this is for top performance. 64KB for the other not sure what it was. Also should i remove the RAID and then do a full format then low level or just leave the RAID as it is. And what should i make it RAID 0 RAID 1 or RAID 5 for performance. I'm a gamer.
Can anybody tell me How can I install vista 64 home premium?
I have xp 32 bit on my computer, and I used the upgrade advice manager from Microsoft, and it tells me my system is compatible with vista. Thank you for any help you can provide, and this is my system info....
I suddenly notice a lot of references to SP1 for Vista. I have stopped updates on my Vista Home Premium, after it killed my WinMail. I uninstalled upto KB 933928, and disabled updates. It is working fine, but I found AVG offering me AVG 8.0, which refused to install saying my Vista is not updated ( after downloading 80MB twice !! !&*()^%$$). How do I get to SP1? Just install all updates from MS? Will my WinMail survive? Or will I be forced to shift to XP Outlook? There is a lot of flak meant for Vista, but my system is very stable ( touch wood and everything else) Request MVP advice.
last Sunday(may 3rd 2009) i updated my bios (unfortunately). problem is, vista (Home Premium 32 bit which i used when problem occurs) is not booting my HDD. after showing my bios screen black screen appears with blinking cursor. i removed and inserted bios jumper for recovery and also battery. but the problem didn't solved. fortunately windows xp is working without problem. now iam using XP professional. i dont know whats the problem.
I've just got this Error for a few days and tried so many ways to solve it, but it seems to be useless.
-------------------------------------------------------------------- Problem signature: Problem Event Name: APPCRASH Application Name: patcher_1.exe Application Version: 1.0.0.1 Application Timestamp: 49055f74 Fault Module Name: ntdll.dll Fault Module Version: 6.0.6001.18000 Fault Module Timestamp: 4791a783 Exception Code: c0000005 Exception Offset: 00023592 OS Version: 6.0.6001.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 1573 Additional Information 2: 8174477e3f239fdb2eb28590ffa32700 Additional Information 3: f1c9 Additional Information 4: f7c0aa8817dca409d416936c036f5b41 --------------------------------------------------------------------
On the first day, i tried to reinstall windows and install this software again. [ Still that error]. The next nay, i tried to install this software on my laptop. [ Still it]. And after checking CMD, i tried on both of mine. [ still it ] The last day, tried to download that software again and reinstall it. [ still the same ] i spent 3 days to find out what's going on! But nothing's gonna change or be better!
No sound issue was solved by my finally uninstalling the driver (convenant) and reinstalling an older one. The problem did start after making alot of updates, one of which was for the Convexant driver. Jan 6 or later so I used one from Dec. Voila!
Haven't seen anyone else using this driver (the other two are Bluetooths) so wonder if it sucks and if I should be using somethng else for this system??
I am facing problems with the registry of the OS. When I install new software, I get some unusual error messages pointing to registry. When I try to uninstall old software, it leaves traces of the software even on the Start up Menu.
Can I do a format of the entire hard disk, reinstall Vista Home Premium (32 bit) again ?? Will it consider my old license or do I need to purchase an additional license ?
If I do a clean installation of the entire OS, what will be the case for Microsoft Office Student Edition 2003 ? Will it consume additional license if I clean install it?
When I put the 64 bit install disk in, it goes through the usual install process. I entered the product key from my 32 bit box, and continued. The install then fails as it says it cannot find an authorised disk to install on. My 32 bit Vista is fully activated, so I am not sure how to get around this.
Installed Free AVG 8 here today on two systems - Vista Home Premium SP1 and XP SP3 with IE7.
On the Vista machine, the installation of AVG 8 broke IE7 in opening a second window - it just hung until the "not responding" message appeared.I tried installing AVG without the surfsearch function, and without the Linkscanner module - still couldn't open a second window in IE. Uninstalling of AVG 8 cured the problem.
The installation on XP SP3 with IE7 had no effect at all. IE7 behaved perfectly normally. Anyone seen this, and is there a fix?
(The reason I went for AVG is that it picked up a virus on my XP machine
When I purchased Vista Home Premium Upgrade a year ago, I upgraded from XP and did a "clean install" that allowed me to wipe my C drive and start from scratch. I did a 2nd clean install a week ago to start over again after experiencing slow response and wanting to start fresh. I'm now getting an activation notice and when I enter the code, I'm told this version cannot be used for a clean install and that I have to purchase another license. Who can I contact to resolve this issue as I paid for the Vista upgrade and the 1st install a year ago went just fine with no activiation issues?
The other day I used the format option to install Vista. I then did an upgrade and entered my key code but I believe the software hasn't been activated even though I chose activate automatically. When I try to activate it it gives me an error saying the code is for upgrade (which I did).Is there a way I can find out if it has been activated? If not where do I find other options to activate it.
Well ive got the 64bit version of Vista Premium and randomly it just freezes the screen and i have to hard reset to get back into it. Error reporting shows something different everytime at the point of error and there just doesn't seem to be any pattern to the freezes, sometimes its minutes, sometimes its hours.
I upgraded from Vista Home Premium to Ultimate using our Microsoft Actiona Pack License that says you must have a previous version to use it. It required that I do a FULL install instead of an Upgrade. Seemed to go perfectly, everything works, etc. Problem is that now I have both Vista Home Premium and Vista Ultimate on my C: Drive and almost no space left. How do I rid myself of Vista Home Premium on this computer now? It's taking up around 52 Gig of space.
I have a laptop with the Vista Home Premium 32 bit version installed. I am thinking of upgrading my desktop from Windows 2000 to the same platform, since I would prefer to keep these two computers as look-alikes. Some desktops (e.g., Dell) are now sold with the 64 bit version. I am told that the 32-bit version will read up to only 3 GB of RAM, whereas the 64-bit version will read up to 4 GB (?).
If I were to install the 64-bit version on my desktop, are there other complications that I might run into when I attempt to run programs/exchange data on both systems? I also run some DOS programs from an earlier century;
I've a weird problem with my IE8. Any page I browse to shows a 'Done, with errors on Page' at the status bar and most other sites such as hotmail turn up blank, with the 'Done' at the status bar and a warning sign next to it.
Its driving me crazy, and I cannot spot anything in Event Viewer System/Application logs that corresponds to this occurrence. Is this a virus that has taken over ...? Should I try restoring the system to any restore point?
I am at work trying to fix a clients Vista 32 Home Premium Lenovo laptop. Model number 0768. We have tried all of the Windows boot options that are offered. We have also tried to repair the install. I would like to get the system stable enough to run chkdsk and memtest utilities.If anyone has any advice on procedure please let me know.
I have just purchased a brand new laptop that came with Vista Home Premium pre-installed (but has recovery disk) - I want to install XP Pro instead as Vista is not compatable with the programs I wish to run. I have booted from my XP install disk and it goes through set-up quite happily until it gets to starting Windows. I gives me the normal options i.e. return to format current drive, D to delete etc.. but in the box it displays if I return or select D I get the following error: "A problem has been detected & windows has been shut down to prevent damage. PAGE_FAULT_IN_NONPAGED_AREA"