"Digital Cable Support"?
May 12, 2008I am ordering a new computer and it comes with Windows Vista Ultimate with Digital Cable Support. What exactly is "Digital Cable Support"?
View 8 Replies
ADVERTISEMENT
Ultimate: Can't Activate WMC For Digital Cable TV
Mar 23, 2008I have two HD tv tuners in my machine, which I ordered when purchased the machine, so the cable guy came to my house to put a card they have to put in the back of this tuner (equiv. of digital cable box, I'm paying $10/mo. for it..) but now I can't activate the digital cable-tv feature in Windows Media Center b/c Vista is not accepting the product key supplied (it's in a sticker on the machine..) folks where I bought my machine said it's b/c Vista has gotten corrupted and I need to re-install it.. (this is based on their experience with other users having reported this problem, it was solved by re-installing Vista..)
now pls note I'm NOT talking about the Windows activation prod key, but another one, a 2nd product key on sticker in my machine, specif. for digital cable TV.. Vista is not accepting this product key; I have to do a clean re-install, which means wiping out all my data and starting over.. this is a HUGE pain..pls also note that the card the cable co. installed is correct one (WMC checks to see if you have correct hardware before it proceeds, I wouldn't get as far as where it asks for digital cable tv product key if I didn't have correct hardware in there..) before I embark on re-installing Vista I would like to know if there's another solution to this problem..
Which HDTV Tuner Card To Use As A DVR With Digital Cable
Sep 23, 2008I would like to use my Vista Media Center as a DVR using a Media Extender. I have digital cable (Comcast). I would be using it just to watch recorded shows on my HDTV using a Media Extender and would not be watching TV on my PC. I want a HDTV tuner card that will record programs from my digital cable using Media Center Software, not proprietary software. Any HDTV tuner cards fit this bill? Can be PCI or USB cards (my PCIe is taken by my graphics card.).
View 6 Replies View RelatedRealtek Digital Out(RCA) Only 2 Channel Sound To RCA Digital Into Reciever
Dec 31, 2008Sound functions but reciever is only detecting 2 channel output. Apon browsing RealTekHD audio properites I discovered that the only options for Digital Output(RCA) were all 2-Channel under "Default Format" tab. However my front pannel Audio Output Jack(HD Audio 2nd Output) has an extra third tab labeled "Speaker Configuration" and has options for up to 7.1 surround but these settings do not impact my Digital Output(RCA) channel. Now my reciever does have a multi-channel input that could take advantage of the Analog Outputs in the rear but the distance is to great and multiple wires are expensive.
View 9 Replies View RelatedDigital Out Not Working
Jan 20, 2009Right where to start, i bought a 5.1 home cinema system for the pure fact i wanted to playe the audio from my Acer 8920G through it. I have been using the normal head phone jack that is playing in stereo but i want to take advantage of Dolby Digital Live and listen to my music in surround sound. So i disabled the "speakers" through control panel in sounds and made the digital output the default but now there is no sound at all although vista says there is a signal when looking at the volume. If i have not been specific enough then please feel free to aks questions, i feel like i am going mad, i can't be unique in ths situation.
View 6 Replies View RelatedAdd A Digital Copy Of A Dvd Or Blu Ray Into My ITunes
Jul 29, 2009Everytime I try to add a digital copy of a dvd or blu ray into my iTunes it says I do not have the access privilages. I am the administrator and my computer is definately authorized with my iTunes. I emailed Apple, and the guy said it was probably a Vista issue, and was unable to help me. Is there anyone out there with similar problems and a way to fix it? It is rather frustrating.
View 9 Replies View Related5.1 / Digital Output Failure
Mar 19, 2008I m using, Vista Home Premium 64bit with sp1 Asus P5N-E SLI motherboard which has a realtek ALC883 sound chip (a 7.1 chip but its limited to 5.1 on this board as standard) im using the Coax output on the back which is contected to my 5.1 sound system. and im using the R1.89 realtek HD audio driver codec (have tryed R1.88,R1.87a,R1.87, and the ones that came with the motherboard R1.57). i can only get 5.1 sound when i play a DVD in WMP, Media center and the realtek digital out put test works too. But when i try playing games (crysis,call of duty 4 and so on) im stuck with dolby pro logic 2.1 and i also can't seem to see the digital output on the realtek manager either no matter what version i use. also the jack info seems a little odd to me.
View 7 Replies View RelatedCan't Get Analog Or Digital To Work
Mar 19, 2008I can't get analog or digital to werk properly at all... I get no picture or sound at all on Analog, but all the channels show up after scanning .. I get choppy video and sound on digital and all channels show up after scanning.. I have all the latest drivers and software, done uninstalls, reboots, and reinstalls ... nothing.
View 5 Replies View RelatedHow Do Output Sound Through Digital
Jul 1, 2008i want to output sound through my digital output and through my front jacks at the same time, i.e while watching a movie through my digital output (monitor i.e video extended to my tv) and playing a game at the same time (game on my LCD), with sound coming out my front sound jack for the game. so basically in a nut shell, i want to watch movies and play games at the same time, while the respective sound comes through different outputs.
View 4 Replies View RelatedDigital Camera Won't Modify
Nov 2, 2009I just uploaded pictures from my digital camera to the computer and now it wont let me modify them. I am panicing! It deleted them off my camera and now I can't upload them anywhere or even modify them. I'm losing my son's memories. This is the only time I didn't "Name" them when uploading because it said it was optional. Any other Windows I have had would just automaticly name them for me and no problem. Now I can't modify and save. It tells me: Changes to this picture have not been saved. The file may be read-only or you might not have permission to save to the pictures location. They are not read only. I went into the properties and checked. This is so horrible. I have never had to deal with this. I even took a mock picture and named it when I imported it and I can do what ever I want to that picture including save modifications.
View 3 Replies View RelatedUnknown Cable?
Nov 8, 2009I have a cable with a square nine 9 pins, a second square nine 9 pins and a single flat blade pin same on both ends. I am assuming it is to go from computer to computer. What is it? It also has a molded clamp on each end. It came with my computer about 1 year ago.
View 8 Replies View RelatedDefault RFS-VGA Cable
Jul 29, 2009Bought the above cable today especially for the UFC. Sorted the resolution out to mirror my laptop but the screen colour is a funny shade of pink! Anyone know of a way to sort this out?
View 4 Replies View RelatedVga Cable Not Working
Oct 31, 2009I use a LCD tv for my monitor. Currently im using a VGA cable to connect it. My 3D card has a DVI out and my TV has an HDMI in. So will it be better to use a DVI-HDMI cable. The VGA cable im using is a cheap one and seems to be having a shielding issue.
View 3 Replies View RelatedWindows Audio Digital And Analog: Can Only Use One
Jul 15, 2007I was used to be able to use the digital as well as the analog output of my soundcard at the same time. (Soundcard is an onboard one with the ACī97 sound chip). But now running vista I can only use one. Either I choose the analog output to be "standard" (then it has the green tick) or the digital output.. Only the one chosen works then. Is there any way to get both working simultainiously?
View 4 Replies View RelatedPixels To Inches With Digital Photos
Apr 28, 2008Does anyone know if there is a way to convert pixels to inches using a digital camera? What I am trying to say is, i have as an example a photo that is 286 KB with a 300 dpi resolution and 2921x2100 pixels. Some one E-maild a picture as an attachment that was 2.01mb, 180 dpi resolution and 3264x2448 pixels. I am trying to understand why their picture 2.01 mb and when I take pictures I never get over 600kb.
View 5 Replies View RelatedPlaying The Digital Input Through The Speakers...
Jun 26, 2009So yea, a friend of mine got me an Xbox 360 for my birthday, however I have no speakers and my monitor does not play audio (so any audio through HDMI is not an option). So, as a result, I bought a optical audio cable for the Digital Input (S/PDIF input), and then played it back through the speakers... however this was on Windows 7 RC1, since formatting back to Vista Ultimate 64bit (Was testing it to see if it fixed some problems), I do not have an option to play the Digital Input through the Speakers anymore (There used to be a volume control for it on the Speakers properties inside of the Vista sound settings, but it's gone now).
I am using this motherboard: ( Universal abit > Motherboard, Digital Speakers, iDome, AirPace, Multimedia ) with the drivers provided by them (It's onboard and uses the Realtek HD audio drivers, thats all I remember since I built it). Anyway, so far the only way I have been able to hear the Digital Input is to play the device through VLC using "Open Capture Device", which has a lag delay (Which is enough to throw sounds off by almost a second or so, which is fairly annoying in a multiplayer game).............
Digital Rights Management With Windows
Apr 18, 2009I am having trouble getting clips to play using Windows Vista with Windows Media Player 11 via the UEFA.com site. I have tried following the FAQ on http://support.uefa.com and also contacted support to no avail. They mention reinstalling Windows Media Player 11, however, this is not possible in Vista as far as I know. I have also tried deleting the DRM folder. Unfortunately, this has not fixed the issue. Finally, the same clips play on my Windows XP Pro machine without any problems. What else could be wrong?
View 6 Replies View RelatedAfter Instalation Windows, Did Not Have Digital Signature
Jan 31, 2009I recently updated my drivers for my video card (an integrated Ati Radeon Hd3200)off of Ati/Amd's website. After instalation windows told me it did not have a digital signature so it would not be allowed to run. I tried to reinstall multiple times to no effect. The main thing is that I can not access my CCC ( Catalyst Control Center). Im running a out of the box Hp pavilion dv4 - 1222nr entertainment notebook pc. I have specs upon request. Sorry im not a verygood speller.
View 5 Replies View RelatedFingerprint/Digital Personal Installation
Mar 23, 2008I am unable to get the program to install correctly in Vista 32. Have tried both version 2.0 and 2.01. Keep getting the error message "User Properties Error Invalid String Class. Suspect Installation Issue". Anyone know how to fix this issue?
View 6 Replies View RelatedCanon EOS Rebel XTi/EOS 400D Digital
Mar 23, 2008"The problem was caused by a compatibility issue between Window Vista an EOS 400D". I have a Gateway GT5464 Desktop Computer with Window Vista (32bit) which Canon Inc. tells me should have PTP Picture Transfer Protocol installed.I have downloaded the latest and recommended software from Canon and still the computer ignores the camera.-----Is there something else that I am missing and where do I find the PTP Picture Transfer Protocol for Window Vista?
View 8 Replies View RelatedDigital Camera Driver Failed
Apr 27, 2008I have a Cannon Powershot A40 camera. UJust used the basic driver in Vista 64 bit to upload the pictures. I use Paint Shop Pro to work on them. Last night I installed SP1 and guess what/ Yup, can't use camera, Windows search for driver failed and Cannon website has no support for this camera for Vista says it's too old. What!!! nor would the driver from the original disk work. I've got a Epson Colour printer that's older than the camera. Epson can manage it, why not Cannon? However this is strange considering that Vista 64 bit had a driver before I installed SP1 Now I've got to fork out for a card reader.
View 6 Replies View RelatedControl Panel Does Not Appear Digital Camera
Apr 2, 2008how to add a program such as Microsoft's Digital Image Suite Import Wizard to the Vista Autorun options for a digital camera? I have found registry entries that will add it to the Pictures section of the Autorun Control Panel but it does not appear for my digital camera (Canon SD950IS).
View 4 Replies View RelatedRealtek Digital Sound Not Working
Mar 26, 2008I have a HP pc with onboard sound - analog and coax digital out. I'm using neither, I have a USB DAC connected which is working just fine. However, on a lark the other day, I went into the audio manager and "disabled" the Realtek digital sound option (which I wasn't using anyway at this point, but it was fully available to be configured and I had experimented with it before - it worked fine!). I fully expected the choice to just "grey out" when I selected disable. In fact, it totally vanished from the panel. Never to return. I tried a system restore but that didn't bring it back. I reinstalled the driver, no luck. This isn't affecting my use of the system (it's a music server - iTunes serving my music to the DAC and out to my audio system), but it's very annoying to have something "disappear" and not easily undone. And if I swap the system for some other household use, I'll want the digital sound back. The analog sound output option was not affected by any of this.
View 4 Replies View RelatedDigital Camera Compatable With Vista
May 6, 2009Looking For drivers for digital camera compatable with vista
View 4 Replies View RelatedSd Card And Digital Camera Not Working
Sep 20, 2009I have a Gateway m 6309 laptop with a SD/MMC/MS/xD slot. I try to insert my SD card from my digital camera, but it won't go in. At all. It also looks as if there is something inside the slot, blocking it. It's been that way ever since I got the computer, but I've never really found anywhere to ask this question before.
View 7 Replies View RelatedCable Modem Resetting
May 15, 2010how to get Windows to remember my modem settings. Every time I wake up or restart my computer I have to get Windows to reset my modem. This has only just started happening after I had help from Microsoft. They had me run a reset .bat to reset my services (in an effort to restart Security Center). It failed and I have since run Black Vipers "safe" settings and also turned off Media Center services. Microsoft help has left my computer in a worse state than it was before I went to them
View 9 Replies View RelatedCan Not Connect To The Internet Via Cable..
Sep 8, 2009i can't connect to the internet via cable! there's no lan cable icon even, i downloaded all the hardwares that are for this cause! from the hp website and installed them, but still nothing have been changed. i even re-installed it from the recovery manager and restared, but still no icon and when i plug in the cable nothing happens. i realy need ur help guys i dono whats the problem. i was using the cable before i restared and it was working good!
View 8 Replies View RelatedCable Unplugged On To Xp Machine
Mar 23, 2008I have little red crosses on the LAN connections between my 2 pcs - one running vista, on running xp sp2. The ethernet cable is plugged in, and the ethernet ports work ok when connecting to a router, they only stop working when one pc is plugged to the other So far I've tried, amongst other things: -Installing the XP networking patch on the xp machine - Getting the workgroup and user names the same on both machines I dont seem to be able to run ipconfig on 1 pc - the window pops up ,scrolls and quickly closes. The xp machine says "cable unplugged" when connected to the vista pc, but is fine when I plug it into the router Can bright ideas...?
View 8 Replies View RelatedHdmi Cable To Connect To Tv
May 15, 2010I have an HP laptop, a Pavillion dv9000. I recently got an hdmi cable to connect it to my tv. I was able to get it to work the first time, but subsequently when I've tried my mouse cursor disappears. I can still toggle icons and such using the keyboard but it's a pain. any thoughts on why this is happening or what to do to fix it?
View 7 Replies View RelatedUSB Data Link Cable?
Oct 10, 2009I see all these USB link cabled on eBay and most say they're not compatible with Vista. Why? What is the big deal? The reason I'm asking is part of my job is to retrieve databases off clients' machines and sometimes I can't tear it down and pull the drive.In that case I have to screw around with jump drives - etc. With the size of these files I need a backup plan - link two machines and pull the data off via a cable.So, why no Vista?
View 7 Replies View RelatedCamera USB Cable Not Working
Mar 23, 2008With old computer, running Windows XP, if I wanted to transfer pictures from my camera to my computer I could just plug the USB cord into the camera & into the computer and the picture wizzard would automatically come up and walk me right through it. With my new computer, running Windows Vista, when I plug the USB cable in, I get the sound that I usually get when I plug the cable in but nothing more happens. I don't know how to get to the wizzard so I can download (or upload or whatever the correct term is) my pics to my computer. I do have the capability to take out my XD picture card and insert it into my computer but I also want to be able to use the USB cable. Is this a Vista thing?
View 4 Replies View Related