Even when my Vista 64 is idle, my HDD never is. I'm constantly hearing the crunch of working hard disks. I halt the indexing, but that never helps. Please advice where to look and what more to disable.
View 4 RepliesI have had this happening now for quite some time. Probably between 2-3 months now, and I'm getting a little fed up with it! Basically, I boot up my pc and for ages afterwards my hard drives are being accessed. I am getting a bit worried as I never had this happen when I had xp installed, only since I bought Vista x64 OEM. Now as I'm typing right now, the whirring has just stopped. :shock: This concerns me as I have 3 x 500Gb hard drives installed in my pc with a lot of data on. I don't want Vista to knacker any of these up! Just for the record, the hard drives are all newish and perfectly okay (at the moment! ).
View 8 Replies View RelatedCan anyone tell me how to determine what I have running that makes my hard drive run like mad
I hit ctrl alt del and clicked the processes tab, theres a ton of crap in there but I can't figure out what the culprit is
Tried shutting the pc down and rebooting, same thing
CPU is running a constant 50%. I have only had this computer for a month and at first it did not do this. then it started every couple of reboots then almost every reboot, but for a while i was able to boot to safe mode and tool around for a bit and then reboot normal and everything would be in sync. I can tell when the comp is booting up if the CPU is going to act up or not, the circle thing by the mouse during the boot up gets jerky and the intro music will be off from the visual..
i have tried turning off the OC but this has no effect. i have to have the OC or the system severely lags. right after this started if i would adjust the OC level it would have some effect ie.. make the cpu normal but now i can do what ever i want and it sits at 50%. While this is happening there are no apps running. and the standard processes but none using more than 04% of the cpu......
I noticed that my curser kept having the little blue circle come up to signify something is working in the background, this has happened for the last 2 days. I have checked and RapportService.exe is constantly running even when not connected to the Internet and uses up to 50% of CPU. Following advice from previous threads I downloaded Malwarebytes and it has found 2 things and deleted them, they were Adware and Wormp2p. However RapportService.exe is still wirring away. I know this is the software from the Banks so am worried that someone is trying to attack my PC and that it is why it is constantly going. I upgraded to Internet Explorer 8 yesterday so dont know if that has any bearing on it. Also have Norton 360.
View 5 Replies View RelatedThe Hard Drive LED light on my Sony Vaio keeps blinking EVERY SECOND. When it's really quiet I can hear it too, it's constantly writing. Constantly. I did my research - read all the threads on the net and so far I have disabled:
Windows index
Windows defender
Windows search
Superfetch
System Restore
Readyboost
Defragmenter
I have uninstalled google desktop.
The system is totally virus and spyware free, and the anti-virus is not scanning (schedule scan disabled). All Vista updates are installed. Nothing has helped. I've run out of things to disable. I'm running Vista Business SP1, Dual Core 2.2 Ghz, 3 Gb RAM.
I have a ASUS laptop running Vista Home Premium, 64 bit OS. I have several programs that I use but no loner have the insall disks for. Should I have to reformat in the future I would hate to lose them. Here's what I'm thinking: Buy a extrenal hard drive. Seagate, 1Tbit, usb, cost $90.00. Copy my hard drive to it. If I need to reformat. Reinstall Vista from my recover disk that came with the computer. Then copy files from external drive. Bingo. All my old programs would be there and working. Question is: Can this be done?
What file/folders do I need to copy to the external drive?
Is it possible to copy my entire hard drive onto an external hard drive. Vista Premium, all the data, etc. and what would be a good software to accomplish this?
View 5 Replies View RelatedI have an external hard drive, I reformated it so I could use Vista's backup.Now it seems that when my brother inlaw tries to put some music files(Itunes) that the hard disc is unavailable to his computer. At this stage it seems that Vista has conned me into destroying a perfectly good WD harddrive!I have created a second partion on the hard drive and I am reformatting that, as I write this, but the only formatting option seems to be this NTFS, and that is what I had already formatted the ExtHD to so I think this formatting will be to no avail!From what I can figure I need to format into FAT but I tried a quick format an ex-fat option was there, but the problem was the same. I am becoming more frustrated with Vista, seems I just keep running into things that should be simple and aren't!
View 4 Replies View Relatedwhen booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies View RelatedDoes 'Local Disc' D mean it is a drive inside my machine or could it be my external hard drive?
View 9 Replies View RelatedI was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
View 6 Replies View Relatedi bought a kit for an old hard drive. i got it to work once ealier today, and now it doesn't work. when i plug it into the usb, it will not successfully install. the kit is a rocketfish hd 35, the hard drive is seagate u8 model st313021a. the "remove hardware" icon appears in the tray, but no designated lettered drive appears on the computer.
the hard drive was part of an older tower that i couldn't get to boot. it's strange because just today i accessed the hard drive and located old pictures, music and other files that i hadn't seen in a few years. had i known this would have happened i would have started saving right away. i thought i had it working.
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
View 9 Replies View RelatedI was starting my computer today (that has Vista), and during the start up process, a black screen came up stating that there was an error opening up my external hard drive and it was checking for errors. After it finally booted up, I went to open the hard drive files, and it was totally BLANK! I then restarted the computer, and still the hard drive is EMPTY! I had ALL my important files in there!
The ONLY thing that looks promising is that when I go to Start then to Computer, it shows the hard drive there, and it still shows that 43GB are free of 111GB of storage (same info shows by right clicking on it and going to Properties). Why would it show this if nothing is on the hard drive anymore? Is there ANYWAY to recover these files again you think???? I NEED those files!!!! Remember that the hard drive STILL PHYSICALLY WORKS. It's just that I cannot access the files on my pc at the time for some reason.......
I just bought and installed a external hard drive. I am fairly knowlegable about computers but this is my first Ex. Hard drive and know very little about there use. So what I want to know is how to save my Family Tree Makers files to it. And once I do that how do I know for sure it is opening from my new drive and not my computer C: drive? I saved it to a DVD one time but when the time came when I needed it all that was there was a short cut but no files.
View 5 Replies View RelatedI've recently purchased a Toshiba P200D-139, which came with Vista pre-installed. The HDD has come partitioned in C (Vista) and E (Data). TBH, I want just 1 drive. I???ve used the disk management function in Vista, and I???ve even done it manually in the cmd prompt, however I cannot extend the C drive at all. I can erase E, I can split it, I can create new drives, extend them, shrink them or whatever, either through the disk management function, or through diskpart.exe in the cmd prompt. I can do anything and everything to the E drive.
However the extend options for the C drive are greyed out. In the cmd prompt if you try to extend the C drive it says there???s insufficient space, yet if you try with the E drive it works fine. Does anyone have any ideas? I'm rapidly running out of room on the C drive, and don't see the point of splitting the same type of data across 2 partitions, espeically when a lot of it is shared/public.
Well, I had 2 versions of Vista running from 2 partitions of the same physical drive:
C: x86 (the original install) (active/primary)
K: x64 (installed later to test it as I wanted more than 3GB ram) (primary)
I then decided to get rid of the C:x86 version and just use the K:x64 one so whilst in K: and using partition software I deleted the C: and merged the K; into the free space. Seemed like a good idea at the time! Well now it won't boot at all. I'm getting the message "NTLDR is missing" at startup. So, using the Vista install disc, I got into DOS or CMD or whatever they call it nowadays and I can see that K: is now called C: My original x86 C: file structure is gone but my old K: X64 file structure is now under C:
I have Windows XP and Vista. I always go through "safely remove hardware" before pulling off USB drive on XP. However, I have been trying to do the same on Vista, it seems that I cannot do the same as XP. For instance, I plug in my USB on Vista and it appears as H drive on Vista, when I am ready to do "safely remove hardware", I don't see the device drive H is on the "Safely remove hardware" window, so I cannot stop the H drive. I am concerned about the Vista hardware.
View 5 Replies View Relatedi have an older maxtor 250gb ide hard drive and i am trying to put it in my computer so i can reformat it and install vista ultimate, the thing is when i go to disk manager i can see the drve, feel the drive, but it wont let me initialize it or anything, it comes up as "the request could not be performed because of an I/O devise error, the disk was originally in my modded xbox and i could acces it with xp.
View 9 Replies View RelatedI have a new pc with only 256MB of RAM- how hard is it to add memory? Also, how do I find out how many GB the hard drive is?
View 4 Replies View RelatedI purchased a new hard drive and named it NEW-BACKUP. I did a exact disk copy from my old BACKUP drive. My wife uses the old drive now. I have renamed my new drive to BACKUP. I am doing complete system backup's pretty frequently. To verify that the backups are happening, I typed in the command "wbadmin get versions" and got a list of the backups. The disk name showed up as "NEW-BACKUP". "NEW-BACKUP" is the destination drive for the backup and renamed as "BACKUP.
View 4 Replies View RelatedI just inserted a SD/MMC Card in my laptop, and it changed my external hard drive letter from F to G?, how can I change it back to F again?, as I had everything setup on the FRIVE, now nothing recognises it?
View 3 Replies View RelatedI just installed a new hd WD500g sata to my box. Vista "sees" the new hd in device manager, but doesnt see it in "my computer. It is freshly installed and straight out of the bubble wrap,I was thinking gee, maybe it needs formatted...but i dont see that option anywhere...maybe im missing something.... i donno...first time i've run into this....usually the drives are "seen" right away.....
View 2 Replies View RelatedWhat is the best way to add a partition to a hard drive in safe mode or in normal mode.
Thanks in advance.
I recently bought a western digital 1TB hard drive which I had to reformat before I could use. Everything works good now, except for onething. Sometimes the computer doesn't want to restart while the new drive is plugged in. If I remove it from the USB port prior to restarting, it will restart just fine.
It shuts down and turns on without an issue. This only happens when I
restart the system with it plugged in.
So while it's not a big issue,it is an annoyance.
i just bought a new laptop and the 140 gig hd came partitioned into (2) 70 gig drives. Is it possible to enlarge the C drive and shrink the D drive at the same time?
View 9 Replies View RelatedMy current C drive has a corrupt system on it (Vista) It needs to be formated and the system reinstalled. I am considering installing a larger capacity drive as the primary (C) drive , install the system on that and use the current drive as extra storage space while keeping some of the data that is currently on it thus not reformatting it. My question is, when the computer boots will it automatically boot to the new C drive or, as the system will now be on both drives, will it confuse itself?
Also. as my system disk is from from the mfr of the computer, I believe it does not have any of the Vista service packs on it. Once formated with this disk should I then get SP1 and SP2 and install them? In that order I presume or will SP2 alone suffice? Where can I get SP1 and 2?
I am contemplating getting a new Hard Drive (bigger, of course by a large margin!) and with the problems I have had with activation in the past, despite being a bloody genuine copy (calm down, Philip, calm down) - how can I go about activating on a new hard drive without experiencing the same c**p I have in the past (last one just needed to type in serial and it was activated, but the 2nd time I had to go via Indian call centre and was on FORTY FIVE MINUTES FFS !!!!....calm down, lad...calm....) So....is there a way to avoid chatting with Sanjay in Bangalore ?
View 9 Replies View RelatedI've just finished my friend's new pc today and I will be using the HDD from his old pc in the new one. Now I was wondering whether I can just install the old one in the new pc, or whether I should format it to delete everything. There's windows XP on it.. So, can I just take it out of the old one and plug it into the new or not
View 9 Replies View Relatedlast week i was recoding some video's using Nero's Recode program (sidenote worked great) but now my 100 gig laptop on has 2 gigs of space left from the original 60 gigs free space. where did it go?? the video files have been deleted, i've used the disc clean-up program to remove the temp files and used the registry to enable Pagefiles removeal from another post of this forum. that clean up some on the space i now have 20gigs free space but i still am missing 40 more gigs that i have before i starting the recodeing.
in my disk de-fragmenter is shows me that i have a huge "yellow" portion of paging files still left and by just guessing it should be that extra 40 gigs just by seeing the size of the "yellow" bar.
how do i get rid of these "paging files" and how do i reclaim my lost space?