I'm trying to install Windows 8 on my pc (hp pavillion g6) which its hdd is completely empty; but it gets stuck on expanding files at 98%
I'm installing it via dvd
I have recently formatted my old windows. But now I am not able to install windows 8(actually even windows XP and seven) . When I try to boot from USB setup starts But 'Getting files ready' (which is second step of installation) stucks at midway like at 14% or 52% or 74% i.e. at any arbitary percentage and nothing happens . Actually I am able to move my cursor but installation no more proceeds further . I have tried to format many times and to run installation but everytime installation stuck at midaway without any error .
My laptop specs are : Acer aspire 5745 , 500GB HDD , 3GB RAM , intel core i3 processor
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies View RelatedIm trying to install Windows 8 (Not 8.1) but it gets stuck at the booting screen (Where setup shuold load files)
My system specs are on my profile.
I've purchased my Lenovo Twist (came with Windows 8.0) about a year ago and I've upgraded to windows 8.1 when it was released in the windows store. Months after I upgraded I ran into a few problems, I was unable to access apps on my metro screen. None of the solutions worked so my only choice was to refresh or reset. I've tried going into the recovery option on boot and the refresh option on the settings both said I needed installation media. I was unable to create a recovery media because the checkbox was grayed out on the "Create a Recovery Drive".
After doing some searching I decided to download the evaluation copy of windows 8.1. I extracted the Install.wim file and set it as my OS image on reagentc.exe. I was still unable to refresh because it said "The drive where windows is installed is locked". The reset option worked, after I completed the reset I was expecting it to bring me back to windows 8.1 instead I was on the evaluation version.
I also noticed that the F11 option on boot disappeared after the reset.
computer specs, GeForce GTX 760 and i5-4670k CPU. MSI Z97-G45 Gaming Series motherboard. 2tb hdd. finally was able to get my new copy of windows 8 to boot from the cd drive. now when i try to install it, (no current operating system is on this hard drive) it keeps getting stuck before it finishes completion. says install failed. think it slugs out at 56%. tried running it 2x same thing. what i could do to make it finish the install?
View 4 Replies View RelatedI recently decided to buy an ultrabook and I got me this one: LG Z360-7416, with a ssd and windows 8 (x64). As usual, it came with a lot of garbage installed which was using almost half of the ssd storage (128GB), so I decided to do a clean install. I got me a msdnaa copy of the windows 8.1 pro (x64). So, i used a pendrive to boot up on UEFI mode and selected custom install and when i get to the select partition, it shows everything fine, i select a partition and when a click on install, it returns an error saying it cannot install on my partition (i dont remember exactly what it says), and when i click on refresh, all my partitions vanishes, even going into the prompt and using diskpart doesnt show my partitions anymore. I tried to load some drivers, but it didnt work.
I was only able to install windows 7(x64), where nothing of these things happens, it installs realy easy. I tried to install windows 8 from windows 7, like an upgrade, but after it restarts, it gets stuck also. My disk is formatted on GPT, as im using EUFI on my windows 7 installation.
Tried almost a hundred times using all solutions i found online, but always the same result. And to get even more weird, some rare times it gets to the installation part, where it says the progress, but stays on 0% of unpacking files...
Its seens to be missing some especific driver to windows 8 be able to work with my ssd, but i cant get it right, but if it came installed with windows 8, it must be a way to make then work together.
Unfortunately i deleted the recovery partitions, so im stuck on windows 7.
I am trying to upgrade my sons win 7 32 bit to windows 8 32 bit he had bought a few days ago.I have tried 5 times .All 5 times it installs fine and reboots and gets to the point where it says 89% getting ready it then reboots and crashes with a blue screen from windows 8 ,the new one.What could be the problem, I have tried no startup items,checked off hide Microsoft services and disabled the rest.The mobo is a Asus P5LD2 . I am all up to date with windows also in win 7.
View 1 Replies View RelatedI did a PC Refresh and Reset and it's stuck at 1%
View 3 Replies View RelatedI have an HP p6720f that came with Windows 7 installed. I upgraded to 8 with no issues around December of last year.
I downloaded 8.1 from the Windows app store without problem. I tried the first install without changing anything (for some reason, I just thought it would work). It got to "Setting up a few more things 59%" and stayed there. For 6 hours. I finally powered it off and went through the restore process. My error code was 0xC1900101 - 0x4000D.
After some reading I tried again, this time unplugging everything but the mouse and keyboard. I made sure I had all the latest updates from Windows and all my drivers were updated. Uninstalled a couple of programs that the compatibility checker said were not compatible (old version of Yahoo Update, an old baseball game). I cleared the Windows Store cache and disabled Windows Defender and Firewall. I did a clean boot and started the upgrade process over again. Same thing. Stuck at "Setting up a few more things 59%". Started the upgrade at 8pm, checked in the morning around 7am with no change. Came back around 1pm and still no change - 59%. Over 15 hours and still, the upgrade failed.
I gave up and used Microsoft remote tech support. The guy ran a check disk thing that scanned for errors. No errors. He then did some sort of network scan or repair, not entirely sure. It took a long time. He started the upgrade. Stuck at 59% once again. They called and took control of my computer. This time only checking Windows Update to make sure there were not updates to install, then went right into the 8.1 upgrade. I knew this wouldn't work. Same result.
For my most recent attempt I did a system refresh (under PC settings, General). This got rid of all my apps and installed programs, but kept my personal files. I was sure this would work. Nothing left to cause any issues. But again, hung on "Setting up a few more things 59%" overnight (8+ hours).
When it's stuck there, the circle/dots are moving like it's working. My activity light starts out doing a short, regular blink, then just doesn't do anything.
What else can I do? I don't NEED to upgrade to 8.1, but i should be able to. And it shouldn't be that complicated.
I'm working on a Toshiba L75D-A7283. Upon checkin, symptoms were booting up to a black screen to log in, then a black screen with cursor after that. Fixed that with a system restore point and a virus removal.My coworker upgraded the machine to 8.1 over the weekend without a Microsoft Account. When it failed, he put the machine into audit mode, I'm guessing so that we could have updates finished and have the system set up with a Microsoft Account when the customer came back in.
However, we can't get it out of audit mode. We've tried several things, including this:Sysprep Error with windows 8.1 At the setupact log, the error that presents is: spopk.dll: Sysprep will not run on an upgraded OS. You can only run Sysprep on a custom (clean) install version of Windows.
At that point the sysprep fails, and I'm stuck in audit mode after a restart. I don't know how to get this machine back to vanilla Windows 8 without a full reinstall.
For some odd reason my laptop decided to not boot into windows anymore; It would be stuck "boot looping" with my MSI laptop logo and a loading sign (rotating circle). I had Kali Linux and Windows 8 installed on the laptop and neither one would work. So I formatted the entire HDD with all 3 partitions, windows partition, even my storage, and kali's partition because the automatic repair wouldn't work as well; it'll be stuck on Preparing automatic repair and wouldn't get past that screen. I have formatted my HDD with my other windows 7 machine by just right clicking -> format.
I have downloaded a torrented version of Win 8 iso (just for the purposes of installation, my laptop came with a Serial # and I have purchased an product key only version as well). I have burned a DVD of win 8 via winISO and changed my boot options to boot from DVD as well.
Now my problem is, when I am prompted to press any key to boot from CD/DVD and I press a key I am redirected to Preparing Automatic Repair and back to square one of my problems. I believe the recovery/backup partition is still on there.
I have tried being in both LEGACY and UIEF. UIEF sends me to Preparing Repair and LEGACY takes me to the windows 8 logo with the rotating circle underneath with nothing after that (not sure if it takes a VERY long time or not)
New laptop MSI ge70
I need to change some setting in my UEFI/BIOS but it is stuck in ready only mode. All options are blanked out except for "exit". How can I get it to let me edit the settings again?
View 9 Replies View RelatedI bought a Win 8 Pro 64 bit upgrade dvd in order to upgrade from Win 7-64bit. After completion I downloaded win 8.1 pro upgrade from the store. At the end of the installation it says "getting devices ready". It starts the process showing the rate and it gets stuck at 6%. Turned off the laptop (by disconnecting power and battery) and got the following message:
".......... Could not complete the update to Win 8.1 ......... error 0x1900101-0x30018 "
I tried to install this upgrade a third time to no avail.
I checked that I got all the win 8 updates.
I did a system restore.
I updated the nvidia driver.
I checked the requirements, including CMPXCHGb support in my 64bit version, by using Coreinfo.exe.
I got windows 8 online and I went to try and use the re install feature but its prompting me with this "Some files are missing. Your Windows installation or recovery media will provide these files" But since i got it online I don't have the CD but I do have the product key
View 3 Replies View RelatedI have upgraded to 8.1 and I discovered that some files in the C: folder have been deleted during the installation. Does it exist some way to recover those files?Are they in some backup folder?
View 6 Replies View RelatedI tried to reinstall windows 8.1 and it deleted my files I used it as a back up drive on my windows 7 pc I had 2 drives one with 7 the other 8 it ran fine when i set it up and used it a few times but the last time i was trying to boot it. It crashed so I tried to reinstall windows files but when it booted back up my files was not there i did not format to HD just reinstall windows i have the windows old files but my files are not in them i can run recovery software and see my files but before i do any thing that i can not undo I want to know is there a way to get my files back i have used recovery software in the past and only got back a few files so I am trying bypass that if I can.
View 1 Replies View RelatedJust purchased a new desktop PC with Windows 8, after some video card issues (now resolved), tried to run System File Checker and received:
"Windows Resource Protection found corrupt files but was unable to fix some of them...."
I copied the CBS file to take a look but i'm not really sure which of the multiple errors are causing my issue.
I've got a few:
"[DIRSD OWNER WARNING]"
and
"Failed to create CSI transaction"
"Failed to get CSI Inventory"
When I tried to reset my laptop, it read "could not find the files needed". mine is an Acer aspire V5, it didn't came with an installation disc or media, i know it should have a hidden partition for recovery, but i think the system is having trouble with it. i think a malware might have done this, i got malware bytes, I tried norton online scan and eset online scan, but did not detect any. before this, i experienced my firefox browser icon on the taskbar progressing a download but cant see anything on downloads tab, i closed firefox several times, but it continued everytime i opened firefox, and it did finished its download.
Later i noticed explorer.exe is always having an established connection in TCPview, without me opening any apps. so i thought i really need to reset the computer, but this is my problem. I've already run Dism /Online /Cleanup-Image /RestoreHealth restore health on command prompt, but it showed no integrity violation.
I have an Asus gaming laptop that I got off of Craigslist awhile back. It did not come with any factory disks. I'm trying to do a factory reset and it says "Some files are missing. Your Windows installation or recovery media will provide these files." But I don't have any recovery media.
View 3 Replies View RelatedI got an HP laptop last year pre-installed with Windows 8 and I want to install a new HDD. How do I go about doing this and not losing any files? So far all I know to do is to create a system disc from the recovery manager, and then a recovery file on an external drive. Does this cover personal files or do I need to back those up separately?
View 5 Replies View RelatedI need to download a copy of Windows 8 Pro 64-bit and save it to a DVD with files already on it. Will it work?
My second SSD went out in my computer and I won't get paid again until Thursday. In the meantime, I'd like to install Windows 8 to a 100GB partition on the 1 TB SATA hdd I've been using for storage in that pc.
Then buy a 80 GB SATA hdd to install Windows 8 Pro 64-bit and upgrade to 8.1.
I have just installed Win 8 Pro to a new SSD and have read that frequent rewritten files and folders should be moved to the HDD, Which ones are they referring to and how would I do this? When they say that frequently used applications should go on the SSD what are some examples? What about games?
120G SSD (Intel 520)
320G WD Raptor HDD
I have Win 7 installed on an SSD with all other files on separate disks. (User files, etc) Can I also install, to dual boot, Win 8 and point everything to the same user files on the same separate disks?
View 3 Replies View RelatedI bought a new SSD and want to do a clean install on it, however am having problems during the install process and receive the following message:
Windows 8 cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007025d
The install images was downloaded from the Microsoft website and I have tried using a USB thumb drive and DVD install disc and both receive the same error. I have used the DVD disc when I originally installed Windows 8 Pro on the same desktop but on an IDE harddrive and believe the disc should still work (i.e. no scratches on it).
Here's how I prepared to install:
1. Unplugged all harddrives except for brand new SSD (Crucial M4 128 GB SSD)
2. Changed bios settings to AHCI (before was on IDE) (using Asus P5k-V motherboard)
I'm not sure what's going on if the harddrive is corrupt, the bios settings need to be tweaked, the drive is incompatible with my motherboard or something else.
I don't want to go back to using the IDE drive to boot windows but rather use the new SSD.
I recently did an update of my machine from Windows 8 to Windows 8.1. The update process did not show any errors or warnings and by the time it finished I was under the impression that everything went smooth.
After the update I was testing the environment and discovered that one of my desktop applications stopped working, I went to the developer's website and indeed I found there is a known issue with their software on 8.1 and to solve it, I had to completely uninstall the software and then install it once more. So I went to Programs and Features in order to do so and to my surprise the Uninstall button was missing from the interface. Right-clicking an item and selecting uninstall from the menu gives a warning message suggesting that the application might have already been uninstalled and asks if I wanted to remove the application from the Programs list. However, clicking OK or Cancel just closes the message box and nothing happens.
So I went and tried to Refresh My PC; Once I clicked Refresh My PC the verification process started and indeed it told my that some system files are missing and that it should take care of it provided I insert my Windows disc. Now since its an OTA update from Win 8 to 8.1 I thought that MS knows that some people will not have a physical copy of 8.1 and so I inserted my Windows 8 Pro System Builder disc hoping it would work, but sadly as you might have guessed, it did not. It told me that I needed the 8.1 recovery disc.
Now I have been looking everywhere for a recovery image to download and use to fix my problem, everywhere I go it suggests that I make my own copy. But how am I supposed to do that if my Windows is faulty and has missing files. I really don't wanna go back to Windows 8 and re-upgrade to 8.1. I have a monitored internet bandwidth and I cannot go and download the 3 GB 8.1 update once more.
How can I repair my 8.1 machine?
I came across this article describing how to get an ISO image for 8.1 with a Windows 8 product Key. However, entering my Windows 8 Pro System Builder (OEM) key in the box fails and tells me that the key I entered is not for this product.
I upgraded to Windows 8 yesterday from the Consumer Preview, and while the upgrade seems to have gone along fine, I can no longer access any of my files that were recovered from the windows.old file. Whenever I do, I get a message saying I don't have the right permissions, etc.
I am the sole user on my computer and the security settings in the properties for every file / folder I'm trying to access have my username, and administrators listed as having Full Access.
Went from an Intel MB and CPU to an AMD setup before realizing that wouldn't just be able to boot into my existing windows installation when I first plug everything in. From what I've seen on the forums I've decided to reinstall Windows 8 on the machine. The problem is that I need to recover the files on the old Windows installation. I have 2 HDDs to play with.
What should I do? Make a LiveCD of some kind and install Windows on a new partition? Make an Ubuntu LiveCD and transfer the files to the other HDD then install Windows?
How do I burn files over to my DVD Disc? With windows 8 there's no "Burn" button when it says "Files ready to be written on the disc". Windows 7 was so much simpler, what do I do now?
View 9 Replies View RelatedHow to clean up the windows containing hard drive from everything but the system files, because I upgraded my windows and not installed it to a clean hard drive. I have a lot of unneeded files. How to do it, without reinstalling windows.
View 3 Replies View Relatedwhen I upgraded to Win 8.1 it was online. I have a win 8 disk but its not recognised. How can I reinstall win 8.1 and not lose anything as it reports missing files.
My daughter plugged in her ipad which normally opened in a setting which no longer works, instead opening in windows which it should not. I opened a file this morning and it opened in the wrong directory??
How do I do am 8.1 repair???
