Setup Installation :: Fail To Boot In UEFI After Installing In MBR
Nov 17, 2013
I just install windows 8 using BIOS , but now i want to change it to UEFI boot. so i followed steps below
1.create and format a new FAT32 partition K:
2.my windows8 is in I: so , i use this command bcdboot i:windows /f all /s k: and succeeded.
3.i checked with the bootice about the BCD in my K: and found it indeed point to i:windows just like the picture below [URL]
4. and i restart, choose uefi boot in BIOS configuration and it showed like this: [URL]
5. i checked my k:/windows/system32/ , there is a winload.efi file... [URL]
The most strange thing is that i've copyed my winload.efi to other computer which is already in UEFI mode , and also i've copyed it in my virtual machine, it works fine! So my winload.efi should be OK.
Is it possible to install Windows 8.1 as Legacy with MBR? Or only as UEFI with GPT? I'm kind of confused with all this UEFI business, I always used MBR in my Windows installations. Also, Truecrypt does not support UEFI, so if installing Windows 8.1 I should do it as legacy.
Also, how can I control during the install process if I want to set my system installation as UEFI or Legacy?
I have an Acer Aspire 5745G-644G50MNKS notebook with preinstalled OEM win 7 home premium.
Specs as following: Core i7 640M Processor (2.87GHz, 4MB L3 Cache)4 GB DDR3 RAM500 GB HDD15.6" 16:9 HD LED DisplayDVD RW1 GB VGA (NVIDIA GEFORCE GT 420M)WIFI / Bluetooth / Card Reader / Web Cam
I'm wishing to update my system into Windows 8 Pro or Enterprises. But unfortunately my model isn't appears in Acer's Windows 8 Eligible Models list or Affected Models List.
I think my system has more than enough performance to run Windows 8. But my bios don't have UEFI support. So, i just wanna know will my computer be able to run Windows 8 without any troubles without that secure boot option.
I"ve run Windows 8 Upgrade Assistant Tool in my system and it says everything is okay except Secure Boot option. also I'v checked individual hardware vendor sites for the latest drivers for windows 8. Most products has the drivers, And the current drivers also compatible with Windows 8 according to the upgrade assistant.
What should i do so? Will the win 8 upgrade useless in my system? or it will be better than the current win 7?
Have any of you successfully installed Windows 8 with UEFI on a RevoDrive X2 (PCI-E express card)?
It starts the installation just fine for the RevoDrive X2 after loading it's drivers, but on first restart it...:
No boot drive found.Manually select to boot from the RevoDrive from the boot menu (F11), and it just restarts the installation again from scratch.
It installs and runs just fine with legacy BIOS (MBR) for the RevoDrive X2.
It also installs and runs just fine with UEFI on an internal SATA2 HDD.
Things I've done:
Bootable Windows 8 USB formatted as FAT32 w/EFI folder in itEnabled wake on PCI-E/PCM in UEFIBooting from USB from boot menu (F11) and not set to always boot from USB.
I have tried installing Win 7 in UEFI on my old Asus K56JV Laptop.
I have used a tutorial by Brink to create the bootable usb. The system can see it but after it has loaded, I get the following message:
Windows failed to start. A recent hardware or software change might be the cause. To fix problem
1. Insert your Windows installation disc and restart 2. Choose your language setting and click next 3. click "repair your computer"
status 0xc0000225
What should I do from here?
I have tried to make the usb both manually and with rufus usb software. The system does not currently run on UEFI, but it supports it, and I have changed it in BIOS. Also I run Ubuntu in dual boot. I don't know if the GRUB interface does anything here, because the recovery will not start either, though I believe it did so last time I formatted the laptop
I am having problems installing UEFI & a Error 0x80004005 with Windows 8.1 OEM saying it can't create partitions for UEFI then creating 2 partitions for MBR installation instead. This using a 400 TB, hard drive, setup with a GPT system & nothing else & ready for Windows 8.1 to create the partitions.
The first time it happened I used MiniTool Partition Wizard Professional, to delete the partitions created by Windows 8.1 & convert the MBR to GPT, then used Wipe Disk function to erase all data and set all the bits to a 1.
The only thing that I can think is upsetting the installation is that I have left the other drives in the system including 1x3 TB drive, 1x2 TB drive and a second 4 TB drive.
The 2 TB drive has "Win 7 Ultimate" installed using MBR, the 3 TB drive is empty but ready to install Windows 8.1 setup with GPT, and the other 4 TB drive has a UEFI Windows 8.1 installed but broken.
I have also tried to install UEFI Win 8.1 on the 3 TB drive but it failed with the same error code as above.
This UEFI takes a lot to get ones head around dose't it, and me being much older than I once was makes it even harder. I have tried this installation at least 3 to 4 times now and doing these "Wipe Disk Functions" every time has so far lost me 3 whole days just in wasted time.
First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection Others say: <F8> No uefi setup option in boot selection I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
I've made a UEFI Win8PE by WADK , then burn it to a CD. I boot normal and I can see X:WindowsSystem32.
I use EasyBCD to [Add New Entry] to append new boot item to existing Windows 8. The boot menu becomes like this :
Windows 8 Win8PE
But the Win8PE fail to boot with error message like insert Windows disc again ...... in the primary black and white screen.
Should I not to use EasyBCD to [Add New Entry] ? As I do the same thing in BIOs + MBR harddisk that booted perfect. In UEFI + GPT partition , do I better not to use EasyBCD , instead to use BCDEDIT , if so , what's the command line to do this with bcdedit ?
Originally my laptop came with Windows 7 and when i looked at disk management my disks were formatted with UEFI schema. One of my friend gave me a UEFI bootable USB drive loaded with Windows 8. So, i thought why not give it a try. So, I created a backup of my OEM Windows 7 and saved the iso files in a seperate external HD (created twice just to be sure . Now, i decided to load the Windows 8. Booted into the BIOS and there is an option to select the USB drive along with the UEFI option for that USB drive. I selected the UEFI option but some reason it does not boot into UEFI.
So I decided to select the standard USB install and this option let me install windows 8. In the process of installing i formatted the partitions and made a single partition and installed Windows 8 on it. I am guessing now the drive is not GPT but MBR. I also noticed that his installation USB disk had an option to select either 32bit or 64bit of Windows 8... Would Microsoft create a same iso file with both versions? I am guessing he created the USB from a illegitimate source.
I am planning on purchasing Windows 8 Pro version as an iso but wanted to be confident that it would work with UEFI architecture.
Questions: 1. Why would the system NOT boot from UEFI? 2. If I download the legitimate iso from Microsoft and wanted to install Window8 Pro via UEFI, I am sure i would have to format my SSD to GPT and how would i go about formatting it during installation? 3. How would i create a recoverable USB for my iso image i created for Windows 7 via ASUS AI Recovery. Do I need to follow the same procedure as stated in creating bootable USB disk (i.e. FAT32 system) via diskpart utility?
I've downloaded a legal iso from MAPS, i ve slisptremed all latest updates into it with Windows download integrator (it uses dism afaik) , then the problems comes in - i cannot use USB as my install.wim is 4,8 GB. I ve burned a Dual layer DVD with Windows 8 stock recorder and the PC doesnt see the DVD drive as bootable. When using stock it boots uefi from pendrive without any problems. How to make this updated iso boot into UEFI mode ?
I recently bought a new SSHD for my laptop and after initial problems with trying to install Windows in UEFI, I turned to Legacy and that worked. But now when I change it to UEFI, it just comes up as "Operating system not found".
1st partition is Win7 SysPrep and the 2nd partition is Windows 8.1 Sysprep. I install Win7 and press Ctrl-Shift-F3 to form SysPrep, same as Windows 8.1 in 2nd partition. I made this becuase I've 25 Dell new Windows 8.1 Computer which are UEFI. I want to clone it to the other 24 Dell computers.
CASE 1 : 2 different partitions with 2 different Windows : --------------------------------------------------------------- If I install both Windows like above, when Sysprep Generalize Win7, it works fine. But if I SysPrep Generalize Windows 8.1, it's fine also, but never can boot again back to Win7. The start boot option is like this : Windows 7 Windows 8.1 If I choose to boot Windows 8.1, it's fine. If I choose to boot Windows 7, it ever boot to Windows 8.1. It means nomatter I choose to boot which Windows, it all goes to Windows 8.1 ?
CASE 2 : 1 partition for Win7 + Win81.VHD : --------------------------------------------------------------- I install Win7 (C and press Ctrl-Shift-F3 to form SysPrep. I create a Win81.VHD in Drive D: , imagex Windows 8.1 install.wim in it. Also press Ctrl-Shift-F3 to form SysPrep. Sysprep Generalize Win7 is OK , SysPrep Generalize Windows 8.1 is also OK. But after that I can only boot to Windows 7 fine, when choose to boot Windows 8.1 , it always restart and back to the boot menu ?
So I've searched, and I've tested, and now I'm about to turn my laptop into a frisbee and never buy a Samsung PC again. In short, I bought an ATIV 7 whose previous owner had downgraded to Win7. I wanted to put Win 8 on and I have a volume license as well as the OEM key so I burned the ISO (actually 2 different ones) using every method I could find (ImgBurn, Rufus, Iso2Disc, Win7 Download tool, etc.) It became clear that the USB needed to be formatted FAT32 with GPT filesystem, however in UEFI mode it shows the USB but won't allow me to select it - it just flashes. If I set it back to CSM and UEFI I can make a USB boot, but even if I use diskpart to clean the drive and convert to GPT it will fail to install because it detects I didn't boot in UEFI mode.
Here's the deal. When I'd installed it earlier this week in CSM and MBR mode, and then converted to UEFI it worked fine. So....I tested several recovery programs we use at work to make sure they'd restore it okay via bootable media. Paragon, Aomei, Macrium, Lazesoft - all boot media failed. ONLY True Image 2014 DOES ACTUALLY BOOT in UEFI mode on my laptop. The only thing I can figure is that the way WinPE 5 or 5.1 (whatever it uses) is set up on it agrees with my laptop. So how I can modify the Acronis recovery media or create similar WinPE media that might actually boot on my laptop.
I have a desktop PC Acer XC600, the hard disk is formatted in the UEFI-Scheme. Now I want to do a clean install of a fresh Windows 8, but I cannot manage to boot into UEFI-mode, neither from DVD or USB.
I can reach a boot menu by pressing F12, but there is nothing like shown in the article about installing Windows 8 in UEFI mode. Only standard bios devices show up. There are simply no UEFI devices. I tried different usb sticks, dvds, formatted them different ways, but the best I can get is the point where setup says "cannot install because the disk is formatted GPT".
But the acutal system is definitely running in UEFI mode (?)
Yesterday, after many, many problems with my computer, I finally decided to reinstall Windows 8.1 Pro onto my ASUS X200CA netbook. However, after backing up and reinstalling the OS, I found that when I tried to disable "Launch CSM" in my BIOS, all of my boot options would disappear and my laptop would continually boot into my BIOS. When I re-enabled "Launch CSM", the boot options would reappear - however, it had not included the "Option #1 - Windows Boot Manager" that I had seen in my other installation.
Since I installed Ubuntu onto my computer, I couldn't boot the Windows 8. I tried installation DVD to repair, but it didn't work. I tried these solutions; solution1, solution2, none of them worked either. I tried refreshing, it stopped at 37%.
When I use diskpart to list partitions from command prompt via the installation DVD, I chose the right partition, but I couldn't activate it.
I will soon be purchasing an Alienware X51, but I am choosing to separately buy a Crucial SSD to install the OS on. I can find videos on YouTube detailing how to physically install the SSD, but exactly how to install the OS on the Crucial SSD upon the initial booting of the computer (without having to first install it on the HDD.)
I have a Lenovo laptop that came with Windows 8 pre-installed. I decided I want to dual boot with XUbuntu.
I shrank my partition and left space for the linux distro. I installed xubuntu into the free space, and even set the bootloader installation to be in that partition as well.
Then after installation, I only get the GRUB bootloader. How to get Windows 8 back and I finally be able to boot into either OS.
However, I have lost the blue UEFI boot manager that Windows 8 should display.
So I get EasyBCD on Windows, try lots of options to regain an original boot manager. But instead of the typical blue UEFI screen, it created a black screen with my boot options (and the linux option doesn't boot from there).
So to summarise, my boot sequence is like this: -Switch on laptop -See GRUB, with default pointing to Windows. I am able to boot to linux from here. -Click Windows and then see Windows Boot Manager (black) with Windows and Linux -Click Windows and it boots. Click linux and get an error.
I have secure boot enabled, and I installed xubuntu in secure boot mode.
I'm trying to update my windows 8 to windows 8.1 on a HP Pavilion g7-2261sb.
However, after numerous trials, every time, the installation stops and says "failed to install. error code 0xc0000374". EDIT: I checked again and it comes after the "collecting data" part.
I've ran the update checker (compatibility), and that gave no problems or errors.
My PC fails to boot into Windows and launches Automatic Repair to attempt to repair Windows. When i try to refresh or reset alway get msg " there is a problem resetting your pc, no changes are made" My PC is preinstalled so no I don't have recovery CD/DVD Here pics
I downloaded all the driver for windows 8 by using service tag of my laptop. When I install JMicron Card Reader driver, I always get an error: "Installation fail!" how do I fix it.
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
Just a quick question about UEFI installation. I've got the Windows 8 Pro DVD but I lack USB Flash Drive 4Gb, is it possible to install Windows 8 with UEFI support with the DVD support or as written in the tutorial the USB Flash Drive is mandatory?
I have an ASUS Zenbook UX32V, which came with win 8 preinstalled.
I was having endless problems with Windows 8, such as software compatibility, and formatted the laptop (removing all partitions), and installing Windows 7 over it.
This has worked fine to date, but I now need to switch to Win 8 again.
I know my laptop supports UEFI, and that the Windows 8 installations are no longer probably on the computer. Is there a way to recover the cd key from the UEFI and use this to download the Win 8 installation files again? The CD key was not supplied in the laptop documentation...