Audio :: Remove Smart Audio Link From Control Panel
Sep 15, 2014
I need removing the SmartAudio application from my Control Panel. Every time I click on it, it says "failed to initialize" - I no longer have it nor do I need it. I would just like to get rid of it from Control Panel, it's not slowing my system down or anything, it's the OCD in me that is killing me seeing a non working function there!
Not everyone likes Windows AppEvent sounds, and in the past it has been possible to toggle sounds on or off or remove a sound from any event using the sounds control panel applet. Windows 8 rp does not give much of a choice.
Windows 8 continues its deconstruction of what we knew and expected of windows in the sounds department - for instance disabling the showing of sound options for windows logon and logoff with the registry key:
HKEY_CURRENT_USERAppEventsEventLabelsWindowsLogonExcludeFromCPL = 1 etc.
(i.e. you will not be logging off from your desktop anymore, so we won't remind you that it used to be available.)
Sound schemes seem harder to get to work than in Windows 7...
Until earlier today I could 'rewind' 15 seconds on the MS Music Control Panel. Having 'updated' the App this functionality has been lost. You can either rewind to the start or the end. You have to use the slider if you want to rewind less. For transcribing a multi-hour interview that is in .wma format this is now highly inconvenient.
How I can retrieve a 15 second shift button again?
I have a Gigabyte GA-F2A75m-HD2 (Rev 1.0) board and this is quite an odd one. The front port worked with Ubuntu and other Linux distros but it seems to be the opposite case with Windows 8.1. I installed the latest Gigabyte version of the Realtek HD Audio Manager but it still doesn't work. What should I do?
For my touchpad I use an unofficial driver (higher version and more tuned than official), which works nicely.
However it also installs some add-on to Control Pane lMouse, which causes about 1 minute delay (of waiting for Mouse window to appear), when I try to run Control Panel Mouse icon (for mouse pointers and acceleration). That add-on is probably new custom tab, however it don't show up, so I don't know. It is probably some DLL loaded at start maybe via Task Scheduler, maybe via system service. (I have already checked more common autoruns - both StartUp folders and also Run registry keys.)
I want to keep the driver, but remove that add-on, what causes delay (by identifying the file and renaming it). What is the best procedure to identify the add-on?
I've installed windows 8 yesterday and noted that front panel audio doesn't work (I use a headphone) connecting the headphone to back jack it's work but front not.
It's a Intel HDA, and using windows's default driver.
Yeah so my front panel is connected to my board but im still not getting any sound Usually in the good'ol versions i would disable front panel detection from the realtek driver utility but i dont have that on this computer
I got a problem on the Volumer Mixer. All started yesterday after i decide to install my new speaker...
Basically before i could control all the computer volume but now when i go to volume mixer there is a lot of stuff open and then i need to control each volume for each application...
I want to be able to remove all applications and be able to put louder my volume with only one slider. Here is a picture of the problem:
The Device is my Headset a Logitech G930. when try to turn the volume louder on this slider:
Doesn't get louder like the headphone used to get.
I recently purchased the Polk Hampden Speakers. For some reason, the manual volume control built into the speakers themselves doesn't affect the volume level. The only way I can adjust the volume is by using my computers volume control software (the little white speaker in the bottom left of Windows 7/8). I am fairly certain the hardware volume control isn't broken, because when I first plugged them in ( a week or 2 ago) they worked fine. It wasn't until I disconnected/reconnected everything from my computer when I installed a new desk that this problem started.
However, even the software volume control isn't working properly either. In particular, when I go into the mixer to see the volume levels for each application, if I adjust the main "Device - speaker volume" it won't alter the specific applications volumes accordingly. Like, I can reduce the main - device speaker volume all the way to zero (not muted) and the applications will still have the same volume level as they did before I adjusted it.
Finally, even my keyboard bindings to the volume control are whacky. I can still adjust the "main - device speaker" volume with the keyboard, however since this "main - device speaker" volume no longer influences the individual application speaker volume level it is pointless to do so.
I have tried disabling all other sound drivers/sound hardware, but it doesn't work.
I have tried uninstalling/re-installing the USB drivers for the Hampdens which didn't work.
I have tried restarting the Microsoft Services responsible for audio output recognition which didn't work.
I have tried downloading the audio drivers specific for my motherboard, but that didn't work.
Additionally, applications sometimes don't recognize the speakers. If I start the application before turning on the speakers the application won't recognize the speakers unless I cycle through the speaker output modes (the little button under the volume knob) and get back to USB mode. Otherwise, I have to completely restart the application. This issue isn't as big of a problem as the manual volume control not affecting the volume output of the speakers.
I have tried uninstalling all my audio devices/drivers, but this doesn't seem to work. They just instantly re-install it appears.
What I want is actually the opposite of what most people are looking for. I want to install windows 8 on my kids computer but want the volume level to be set at a certain level so the sound is not to high no matter what they do.
I am able to achieve this right now as the desktop is on XP and i have the wave bar set to a certain level so no matter how high they put the volume bar it just stays at a certain level.I have hidden the wave bar so they cannot even get at it by mistake.
The main thing is that I am using a sidewinder X4 keyboard which has the vol+/- so they can easily increase the volume even if I hide the volume tab from the desktop in windows 8, while in XP it remained a certain lvel even if they put it upto 100%.
I have been searching for win 8 mixers where I could maybe have the same type of control as the XP but so far have found nothing.
Before installing my new Sound Blaster ZxR I had to temporarily use the Onboard Sound of my Asus Rampage IV Black Edition because of a SLI Water cooling component blocking the necessary PCI Port of the former Sound Card ( a Sound Blaster Recon3D Fatal1ty Professional ).
Because of the cracking ( grounding loop? ) I receive during the startup when using 3.5mm jacks ( or 1/4" with the ZxR ) I stopped using them whenever possible and instead started using the Toslink connection on both the Recon3D AND the RIVBE as it electrically disconnects the PC from the Sound System.
Now here comes the Problem: Using the new Sound Blaster ZxR and having it connected via Toslink to my Sound System I'm not able to control the Volume using.. Multimedia Keys on my KeyboardVolume Mixer from the TaskbarEven Muting isn't possible
The only way to change the Volume level from now on has been by doing one of the following four.. Change the Volume level by Hand in the corresponding App itself, not the overall System Volume - Kind of sucksUsing the Hardware Dial on my Speaker System - Hard to reachSwitch from Toslink to Jacked Cables - Startup cracking Also
Switching the default Playback Device from Speakers to Digital Audio (S/PDIF) - Will cause me to loose the ability to run Encoders like Dolby Digital Live or DTS Connect and it's DTS Neo:PC Music Mode feature which, in my opinion, really improves my listening experience as it then uses all my Satellites, not just the front ones.
I'm not sure how my settings were while still using the Recon3D that allowed me to go Toslink while still being able to change the System Volume simply by using the Multimedia Keys of the Keyboard.
Recently I decided to go ahead and update to the Windows 8.1 version of the Realtek HD Audio Driver. I procrastinated because it told me I'd have to uninstall the original audio driver and I knew it would take a while to do everything needed. It didn't work that after uninstalling the original audio driver, then restarting like Windows told me to do, I kept getting error messages that forced my computer to restart until eventually my computer let me log in and install the updated audio driver.
However, with the updated version of this driver I had the same issue I got with the original one only much much worse. The original Realtek HD Audio Driver that I had on my computer made music and videos sound absolutely awful when headphones were plugged in. I found out that this is because the driver automatically puts on so-called "enhancements" whenever headphones are plugged in. This was a very simple fix, simply go to "Sound", then under "Playback" you click on "Speakers", then go to "Enhancements" and check the box labeled "Disable all sound effects." Then sound through headphones would return to normal.
Well, with the Window 8.1 version of this audio driver, I can do the same thing, but it never stays that way. Every time I plug in my headphones, it resets back to having enhancements. The strange thing though is that it says the enhancements are disabled but when I reactivate the enhancements(No difference in sound quality) then deactivate it again, suddenly the sound through my headphones is back to normal.
Did the audio driver not install properly? Is there something I can do to permanently disable the audio enhancements?
OS: Windows 8.1 Pro Processor: AMD FX-1400 Quad Core RAM: 8.00 GB Storage: 1.73 TB of 1.81 TB available System Type: 64-bit Operating System, x64 based processor
A while ago, my PC was having some lag issues that made the computer practically unusable. I found out in msconfig that I had almost all services running. I disabled many of the services, and I made sure not disable the necessary ones (i.e, Windows Audio.) I restarted my computer and there was a red circle with a white "X" over the audio icon. I clicked on the icon. A window named "Playing Audio" opened. On the window was a bar similar to the one shown while loading/downloading something. Above the bar said "Detecting Problems" and then "Scanning for hardware changes...". This went on for about 10 seconds. After this, the window changed. At the top in blue was "Troubleshooting has completed". Under that was "The troubleshooter made some changes to your system. Try attempting the task you were trying to do before." In the center of the window was "Problems found-Hardware changes might not have been detected".
In the search bar, I typed "Manage audio devices". When I opened it up, the window told me that there were no audio devices installed. I have checked in Device management under "sound, video and game controllers" That I have sound drivers installed (AMD High Definition Audio Device & High Definition Audio Device.) I have tried multiple times to uninstall/reinstall the drivers to no avail.
Radeon HD5450 Samsung TV connected via HDMI to graphics card AMD HDMI High Definition Audio Device Realtek HD audio
I have a strange problem that has not always been there but just recently if I don't have any sounds for about 5 minutes the HDMI audio seems to go into some sort of suspended mode and when I click on (generate) a sound (either system or music etc) it takes about 30 seconds for the sound to actually appear (manifest itself) through the Samsung TV speakers.
At first I thought it might be some conflict with the Realtek HD audio so I have disabled this (mobo built-in sound) in the BIOS and uninstalled the realtek drivers. This did not work.
I then thought it was probably an update to the Sound drivers or the graphics drivers for the ATI / AMD Sound card. I have installed the latest catalyst drivers and this did not work. I then fully uninstalled the catalyst drivers including the HDMI Audio and installed an earlier version 9.2.00 from 2012. This did not work either.
The only Playback Audio Device I have in the Sound settings is Digital Audio (HDMI) and I have tried disbling all audio enhancements. This did not work.
Please note that this happens even if I am using the computer (i.e. the screen can be on all of the time and it still happens after a few minutes).
Other things I have tried:
Power Config - disabled Link State Power Management for the PCIe card
One think I have observed (and I am not sure if this is a symptom or a cause) - The "Windows Audio Device Graph Isolation" process uses about 3-4% CPU while the 30 seconds or so elapses between the sound being invoked and it playing through the speakers. the rest of the sstem is relatively in idle. I can reproduce this by clicking on the sound and adjusting the volume a tad. It is meant to make an immediate "bing" sound to show the sound level is clicked or changed.
If I wait the 30 seconds then the sound eventually comes and then if I click on it again (or do other sound related things) then the sounds are instantaneous. Its only of I leave it 5 minutes or so with no sound activity. If I wait, say, 2 minutes the sound is instant too so long as their has been a sound event in the prior 5 minutes or so.
I have a windows 8 laptop and today the sound just stopped working. The windows audio service will not enable and everytime i try to enable it fails due to a duplicate in Windows Audio Endpoint Builder.
Now tricky part is i cant open control panel as it doesn't load, i tried reinstalling windows 8 but it also not load. This all was working perfectly just earlier today. I have no sound, just an x by the sound.
When I watch YouTube videos I get random stutters where the sound skips. The image doesn't seem to freeze though, just the sound
I also get issues with the sound streaming music online, where it pauses for a second and stutters even though it's not buffering.
When this happens, NT Kernel & System shoots up in task manager and uses more CPU than the browser. This by the way happens in every browser, IE, Chrome or Firefox.
It doesn't happen when playing music in iTunes or watching videos from my hard drive.
That being said I'm not posting about a buffering type stutter, I am aware of that and this is not it. This is like basically suddenly the computer has a big spike in memory or cpu usage and the video/sound clip stutters for a sec. But it happens often enough to be very annoying. In a 15 min YouTube clip it happened 10 times.
I have reinstalled my IDT High Definition Codec and my Intel HD Graphics 4000 driver, but still the problem persists.
I have Asus All In One ET2701INKI, the problem is the microphone does not work properly, It has dense distortion and echo, microphone works in other devices very well.
I am using Windows Pro 64 Bit, and I have latest Realtek Driver, I have tried High Definition Audio but again no solution.
I have read that if I choose "Separate all input jacks as independent input devices" from Realtek Audio Manager's Advanced Settings, I am sure the problem will be solved, but I do not have Advanced Settings.
I have only: Display Icon Notification Window Enable Auto Pop Up Icon
I was trying to fix a problem, and then I removed some programs, and I think i accidentally removed a file that is needed for the dolby. Now I can't open it, and when I try it says that I could re-install it. But how?
I've been trying to configure my brand new hp PC with Windows 8.1 pro to auto-sleep but I have been unable to do so. If it hit the power button or select sleep from the menu it will sleep, however.
I ran powercfg/energy and it appears from the report that this is the issue:
System Availability Requests:System Required Request
The device or driver has made a request to prevent the system from automatically entering sleep.
I updated to 8.1 because supposedly, it was to offer features similar to win 7. Instead, it's even worse than win 8. Now, the sound quality on my laptop is lousy because the Dolby Audio driver receives an error message and isn't working. I went to Lenovo (I have a Ideapad N Series 580) and followed these instructions from Lenovo and microsoft, which unfortunately didn't work. I'm still getting the same error message. I wish I had never heard of windows 8.1! Many have had this same problem after installing 8.1. This instructions are from Answers.Microsoft, but didn't work.
Open Device Manager. (Right-click on the Start button and choose Device Manager).
Expand the Sound, Video and Games Controllers section.
Right Click on the Conexant Smart Audio HD item and choose Uninstall.
Still in Device Manager, click on Action>Scan for new Hardware.
The Conexant Smart Audio item will re-appear.
Right-Click on it and choose update driver.
Navigate to d:driversaudio.
When that's done, close Device Manager.
Open File Manager and navigate to D:driversAudioDolbyGUI and install Dolby Home Theater.
These instructions are from Lenovo and didn't work.
So about a month after I bought my computer,all of a sudden there was no audio comming from my headphones or speakers. i do have to say that windows 8 was a bit new for me because i was using windows xp the only way i can get audio now, is by plugging in a usb with bluetooth connection. even HDMI won't work. i'm getting no errors when running errorchecker.
Perhaps usefull info: -pc Model No: HP ENVY h8 PC series -running windows 8.1 -i have extra beats audio (for audio settings).
Two programs are creating audio outputs such as a game program and iTunes, I desire to send the game program to my headset while remain the iTunes audio to my default playback device, speakers.
I am wondering if there is audio management software. Similar to how if I am on Skype I can communicate through headset and hear them on the headset while the audio on iTunes by default is outputted through the speakers.
I want to play Nether and hear everything through the headset and keep music playing on the speakers so my girlfriend does not hear me play games.
So today I got a new acer laptop with windows 8. The laptop only has one audio/microphone input in it. When I first plugged the headset microphone jack into the singular input, it asked what device it was. I selected headset and moved on. Later, I could not find my headset mic in my audio devices/microphones. I could only see the computer default internal microphone.
I just bought a new pc and received it today, and i plugged my headset in to check if i hear audio from both speakers and headset but its not working. When i plug my headset in i only hear audio from my headset and not the speakers. Ive been googling and found something about it but with the newest realtek hd audio i dont have the Playback Device there, only the Recording Device. In this picture it has both the playback and recording device.
i've been having this problem since I THINK starting to use a HDMI wire. But now, i cannot get any audio from the audio jacks, they are detected, but no sound is produced and I just cannot figure it out. I've disabled the HDMI, installed, un-installed, re-installed audio drivers and pretty much any method and i can find thus far and nothing at all has worked. I'm a huge lover of music, and the is driving me insane!
Note: The speakers are fine, they work with my iPhone.