Change Drive Letter Of Boot Volume
Jul 25, 2005how can i change the drive letter of my boot volume
View 9 Replieshow can i change the drive letter of my boot volume
View 9 RepliesI have a dual boot system with both having windows xp.When I load into the 1st XP installation, the following is the list and assignment of the drives:
C : Local Disk (contains the 1st XP installation)
D : CD Drive
E : Local Disk (contains data and also few installed program folders)
F : Local Disk (contains the 2nd XP installation)
Initially when I noticed this drive arrangement after setting up the dual boot, I just left it as is, not knowing what to do.But nowadays I am having a lot of problems as the installed programs are not accessible because their target location keeps changing, everytime I keep switching between the two operating systems.How can I solve this problem?Can I do the follwing : Load into the 1st XP installation, and then change the drive letters (of the last three drives) such that they are matching the drive assignment as seen when loading into the 2nd XP installation.Here in a way I have kept the same drive name for both installations.But Will this work?I also have some of the program folders for the 1st xp installation stored in E drive, and after changing it to D drive, will all the links be properly converted upon restart?
what the prime uses for a logical drive (just assigning it as the letter F: for example ) might be vs. Mounting the logical drive as an empty folder that supports drive paths?
And why someone would want to use one option vs. the latter? (common uses)
I just upgraded my "guts" (mobo, ram, cpu) and am trying to get all set up. I installed windows XP on a brand new hard drive on a newly created partition. On the setup screen, it says C: Partition1 [NTFS] I left some unpartitioned space on the new drive for a later win xp 64bit version install and I also have another HD that is listed as D: Partition1. After the install, my system disk drive letter was F: and my other HD letter was E: I go to disk management and I can change my second HD letter but it won't let me change my system drive letter back to C:. How do I get my system drive letter back to C:?
View 1 Replies View Relatedi reformatted my windows partition to try and solve a constant crash problem.my hd is divided up into 2 partitions with the second being where i stored all my data and mp3's.I only formatted the windows partition and now my second partition is inaccessable.The drive letter has also changed from k to d..i tried changing the drive letter back to k and the partition was still inacessable.Any help would be awsome on this.I would hate to lose 100+ gigs of data
D: is not acessable
the file or directory is corrupted and unreadable
I have 2 drives, one with Windows and such, and the other with about 1,000 games that my girlfriend plays. She let her grandson on, unsupervised, and the next thing is a trashed system drive. Unfortunately, there was no way to save it, so I did a format and clean reinstall of XP Home. Goback was on the drive, and there was no way to uninstall it before the reinstall. The reinstall went fine, but the GAME drive is virtually inaccessible. It doesn't show in My Computer, but does show in Admin Tools, Disk Management. However, the drive name is shown as F(F. It should either be D: or F: ( there are 2 optical drives). I can't change the name or drive letter. I get the error "the drive is locked".
I tried Partition Magic, and it will change the info, temporarily. Also, PM shows the drive as *.F It doesn't give any error message, and says the change has been applied, but it obviously hasn't. I searched this forum for "hard drive locked" and followed suggestions that I had not tried previously. The smiley replaced a colon; the entry should read F(F. Sometimes I think I might know what I'm doing, and then I realize, maybe not.
Just installed windows xp and I have an atapi zip drive that was assigned as c: and my hard drive was assigned as e:. Is there a way to change the drive letter of my hard drive to C: without reinstalling XP or damaging anything or is having the hard drive as E: harmless:
View 6 Replies View RelatedRunning win-xp-he-sp2 OS. I want to change the Drive Letter for my hard disk #2, but the Change Drive Letter is grayed-out; in fact, this is true for all the drives listed. How do I correct this problem?
View 13 Replies View RelatedI recently installed a new hard drive into a friends computer and installed XP Home.
I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do.
I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
I bought a computer for my wife and kids. Well months go by and my wife tries to install something and notices that the MAIN drive is H: not C:
I figured that it was weird but no big deal. Well I purchased a printer for her and while trying to install the software it was giving me a "Windows - No Disk in Drive" error.
I did some research and spoke to HP tech support and they suggested that I search the web for a way to change the drive letters from H: (current hard drive) to C: (supposed to be default drive)
I was doing a new installation of XP home on a new hard drive, XP formatted the drive as F: and installed the boot sector there because a thumb drive was in the usb port (which it recognized as C:). I wasn't paying that close of attention and I didn't realize XP would see that thumb drive as C:. My question: is there any way to change the boot letter back to C: without reformatting the hard drive?
View 3 Replies View RelatedI reformatted a crappy gate way which has a recovery partition, but it would not reformat the rigth way, when i went to set up windows, Push the next button, i big white box went over everything and that was that, i reformatted 3 times and it kept doing it, so i got a winxp pro disk and did it this way, everything works geat, but now, that damn partition is taking my drive letter C, and i have already read the thing from microsoft about regedit, i did it and i could not load windows, it froze after Loadined winxp, mouse moved but nothing happend, i reformatted again... still taking my drive letter.. please help, if i have to reformat one more time, i wish for it to be the last, and my drive letters to be right.. HELP!! THANKS
View 2 Replies View RelatedI have Windows XP Home Edition, SP2 on two separate bootable hard drives in my Dell XPS B1000r. I have my 80 GB �main� hard drive and a 40 GB �extra� hard drive. I mainly boot from my �main� 80 GB hard drive, and that�s the drive that won�t boot after I changed the drive letter.
I wanted to rename the Drive letters associated with each of these hard drives. I was able to change the �extra� hard drive using the Disk Management option. I was not able to change the letter of my �main� hard drive, because I booted from it. I used Regedit to change the boot drive letter, based on the Microsoft Help & Support article:
http://support.microsoft.com/default...;EN-US;Q223188
I have a new XP Pro SP2 system that has two hard drives: the Master C:drive, and a second drive. It came with the second drive showing as the F: drive. D: and E: drives are DVD/CD Roms. My question is: How can I change the Drive letter of the second drive to D: from F:, or is this possible now that the system is set up? And then change the DVD/CD Roms to E: and F: respecfully?
View 6 Replies View RelatedRead about how some viruses can look like a genuine system file yet be off by maybe one letter such as "l" would be a capital "i",
View 20 Replies View RelatedI have a HP ze5568cl laptop (Windows XP SP2). For a few years we've had trouble with the power connector. We've just wiggled the power cable to keep it connected and lived with the problem. It also gets very hot and the fan runs constantly. Yesterday when I powered it on there was no power, absolutely nothing. My husband has some electronic knowledge so we took the laptop apart and he soldered the loose part of the power connector. While he was doing that I cleaned the fan (couldn't believe how much dust was in there.When we plugged in the power cable the orange light came on so we were excited. When we powered it on all the keyboard lights lit up so we thought we had fixed the problem but.that's all it did. It went no further except that the fan kicked on.There is a clicking noise coming from the cd drive about every second with the green light flashing. I suppose it is checking to see if there is a bootable cd in the cd drive. I have attempted to change the boot order by holding F1, then F2 but it still continues to try to read the cd drive. I can't get to the screen that will allow me to change the boot order.
I also put the OS disk in the cd drive, hoping that it would start with the disk but it just clicks. Hubby removed the cover of the cd drive and I could see that the cd is spinning.There were no problems with this laptop prior to the power problem. It was really working very well especially considering the age of it.
The information in my sig is not for the computer with the problem. It's actually for an old computer which my son now has at college.
if we can assign a letter for a drive [for example, C:], then, can I assign a letter to a folder? Because when I save/open a file or anything like that, I can just type the letter of the drive if I want to access a drive
View 14 Replies View RelatedMy office has a number of mapped network drives for each user which, unfortunately, start at drive letter F.Each time a USB device is used on the computer it is also automatically assigned the drive letter F (presuming that C is hard disk and D and E are CD/DVD drives). This has to be manually changed from within Disk Management.Apparently this is as a result of physical drives taking precedent over the mapped network drives.Is there any workaround for this other than moving the mapped drive letters further along in the alphabet? - this is not really a feasible solution at this time.
View 4 Replies View RelatedI had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
View 2 Replies View RelatedAfter reformating my pc, my secondary hard drive is now designated as drive "D". Before the reformat it was drive "G". I have software that needs to get data from drive "G" but the drive is not designated as "G" any longer. I can't remember how to reassign the drive letters so that I can designate the secondary drive as "G".
View 2 Replies View RelatedI have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
View 10 Replies View RelatedMy external drive has always been "E" and I have several desktop shortcuts that relate. Recently I inserted a flash drive containing home movies and after viewing and a reboot later I noticed that my external drive is now shown as "New Volume F". I would like to change it back to "E"
View 5 Replies View RelatedA laptop has 5 mapped drives which are only used on the office. Offline files is not an option. When a user on the road clicks on a mapped drive by mistake, the explorer window locks up while it tries to find it.
Instead of doing something sensible like taking the explorer window to C: drive or desktop, it goes to the next drive letter. Of course this is also unavailable. So the machine is essentially unusable for about 5 minutes if the user mis-clicks once.
not being computer literate , i am having a problem with a new hard drive . i took out the old one . i have the windows disc and product codes , but i can't get it to boot to start the windows installation. i have done it on another computer , and the disc begins installing windows on start up. i have tried starting the computer with the disc in place , and without it . obviously , i must be missing something to get it started . the disc is brand new .
View 8 Replies View RelatedOn our WinXP systems (SP1 & 2), when users attempt to us usb flash drives, sometimes the O/S tries to assign an already used network drive letter to the device, making it unaccessible. Of course, the non-admin users can't use drive manager to change the drive letter. Is their a way around this problem?
View 2 Replies View RelatedProblem is after reinstalling xp on a new hard drive my second drive only shows up in disk management does not show up in my computer .It has all my stuff on it from my old drive so really need teh info on it badly.But under disc manmgement where it shows up healthy with no drive letter everything is blanked out except delete partition.
View 4 Replies View RelatedWin XP Pro, USB 1.1 in front, 2.0 card added to PCI slot.I can put in a jump drive or a flash memory card reader and hear the XP bong, it does the new software found and says it's available, but It does not show on 'my computer'.I can go to manage, disk drives, and see it. I can right click and assign a drive letter, but still does not appear on 'my computer'.I can still open it after assigning a drive letter in 'manage' and read/write files from a new window.I'm suspecting BIOS? It was a machine I upgraded to XP Pro.
View 14 Replies View RelatedI have a Dell Pentium 4 computer that has it's C: drive changed to the drive letter F: which causes some problems for me. I would like to know how I can change it back to C: without reloading my OS.
View 7 Replies View Relatedas i know at winxp disk management there can change drive letter, i saw on there only have A: to Z: only, is it only can assign drive letter from A: to Z: only? if i need more drive letter how?
View 3 Replies View RelatedI am having an issue with changing the main drive letter on my mother's computer. I made a pretty amateur mistake when I was re-installing Windows XP for her and left my external hard drive connected from taking her files off of her old hard drive so the installing found "H:" being the most appropriate drive letter and now a few badly written programs she has tried to install automatically fail because they are set to look for drive "C:".I know my only option is to re-install yet again to get a fresh start, but I was hoping there was another possibility (albeit might be harder) to set the drive letter right. Typically I went to "manage" and "drives and storage" and attempted to change the letter, but Windows will not allow me to change the drive letter of the main volume. If anyone has any suggestion, please throw them out there-I may have made an newbie mistake, but I know my way around pretty well.
View 8 Replies View Related