Slipstreaming SP2 onto my XPhome SP1 worked fine, at least the first time. (Did not try for a bootable CD yet.) Then the 2 folders were wiped, started over, to now change deploy.cab to the newest. The update.exe..command gave an error: "Program error, updated.exe has generated errors and will be closed...". Retries, reboots, not changing deploy.cab, doing it in a DOS cmd window of W2000 Prl SP4, do not work. What is needed to unstick this? I really wnat to have the slipstreamed XP ready when the new computer parts arrive in a few more days (Asus A8V Deluxe, 3200+ 90nm, 1G Patriot LLK, SLK3700-BQE etc).
I would like to know how to uninstall an update that was performed by Windows Update.The update itself was in the "Hardware, Optional" Type list (ie. not the"High Priority"or the"Software,Optional" list)The update that was installed shows up in the History log correctly I believe that Microsoft incorrectly scanned the computer and assigned a hardware update that pertained to a different type of hardware ... specifically, the update pertained to an "IBM Thinkpad UltraNav Pointing Device" whereas the actual hardware is a Toshiba Satellite with a Synaptics Touchpad".
I wanted to install Win Xp but did not format the HD in NTFS....the XP went through the 6 floppys and the CD UP to the point of asking for the service pack 1 disk seeking the asms file. the partital install won't let me do anything, just keeps cycling through, rebooting, and asking for the file. I can't get the cd-rom to read a GpartedLive.iso. the disk just spins in there, and any start up floppy is ignored.
This computer stopped booting. It would freeze in the process. Since there was nothing on the hard drive worth saving, I used the recovery boot cd. It went though the process, rebooted, and returned to the setup process. In the middle of the setup, while installing devices, the computer froze again. I have tried repeating the process to no avail. I have tried turning off some of the not so necessary things in the BIOS and trying it.
My computer has stopped working all of a sudden. It does not even start when he turns it on. It was working perfectly the night before and when he turned it on the next morning, it just did not start. He says that it never gave any warnings or error messages and this was the first time. Could this be due to the power cord or the power supply?
I decided to clear the dust out of the inside of my computer tower today. After cleaning out all the dust, I turned on the computer for the first time and I noticed the fan on the side had stopped operating. But I have a Nokia Tower/case if that is of any help to anyone. It's the colourful fan on the side which has stopped working.
My USB devices were working fine untill I went to Windows Updates and downloaded all the latest updates. This is when all my problems started. Now when I plug in a USB device I get a balloon on my task bar stating that my "USB device is not recognizied". I have done all the troubleshooting. I have XP PRo with all the latest updates.
I am running XP with SP1 and SP2.My high speed USB 2.0 stopped running at high speed. When I attach a device it indicates that device would run faster on high speed.
My ipod shuffle which has been working normally up until this point is now only recognized as SMTP 3500 - personal class recovery device
I have tried updating the drivers and have had no luck.
What happened was this: I loaned my computer to a freind and told him, "Don't install anything without checking with me first!" He did, for about half the stuff I took off after I got it back.And my alt-tab has stopped working. The thing is, it works fine for the other profile on the computer. I'm assuming the problem is a registry setting somewhere. I looked and compared but I couldn't find anything out of line. So now I'm at a loss. I know I missed something somewhere. Oh, and I'm using WinXP SP1 on a Compaq Presario 2100, which I update on a regular basis.(This is a loptop I use as a "loaner," not my good one with all my personal stuff on it, by the way. Maybe I should get a copy of Norton Ghost before loaning it out again.?
For some unknown reason my screensaver just stopped working about a week ago. If I hit the preview button it works fine but when I wait for X amount of minutes for it to turn on it never does. I use it so that it will log me out automatically and auto turn off my monitor after so long, it is very handy.
my keyboard got messed up and stopped working. When I was messing around with the back of the tower to try to fix it, I somehow killed my sound off too. Eventually, I got a new keyboard, but after adjusting with the stuff on the back of the computer tower the sound still didn't work.
Since my sister's computer specs and mine are the same, I checked out the device manager on both of the PCs to see what was missing from mine. I found out that it was a "Realtek AC'97 Audio" listing. So of course, I google it up and download what I find. However, after installing it, it still doesn't work. It doesn't even show in the device manager! And to make matters more confusing, when I start up my computer, it says that I can press Shift+F10 to configure it. When I do that, a DOS-like menu pops up where I can change a few options but nothing I change will get the sound working.
When I go to Accessories --> Entertainment --> Volume Control, it says that there are no active mixer devices available.
I don't think it's related to viruses or spyware. I've scanned multiple times with TuneUp, Spybot, Ad-aware, Norton, and a few other programs.HiJackThis information:
Logfile of HijackThis v1.99.1 Scan saved at 5:58:14 PM, on 9/5/2006 Platform: Windows XP SP2 (WinNT 5.01.2600) MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
(Also, I have no clue why it says WinNT 5.01.2600 on the platform listing. That started happening when I was working with the TCP/IP connections, though it's not important as of now.)
If you need me to post any other hardware listings or, well, anything about my computer, just ask.
The sound on my PC stopped working about a week ago. Hadn't installed anything in at least the few weeks before it stopped. I decided to re format the PC a few days later thinking that it would be fine, which initially it was, am running XP professional. Windows did all its updates as per normal and the sound stopped again.
Reinstalled the PC yet again to try and get to the bottom of things and this time went through things a bit more slowly. Did it's first lot of updates, was fine after those. That was yesterday that they updated. Tonight installed Service Pack 2 and thats when it has stopped.
In the Sound and Audio Devices section of the Control Panel it is saying there is no audio device installed, yet I had installed it via the CD that came with the motherboard. Soundmax sound on an ASUS k8v SE deluxe motherbord. why something like this may have happened?
I downloaded Diskeeper 2007 Pro Premier for a free 30 day trial, decided I didn't want it, uninstalled it and now my XP Pro Defrag has ceased to work any longer. I get some weird message that it can't initialize and that I must have downloaded a different version . guess the two were fighting each other. Point is, can I download MS Defrag as a stand alone (Googled but no luck) or do I have to reinstall XP all over again... Also, is MS Defrag good enough are does Diskeeper do a better job for the averge home user?
System Information: Microsoft Windows XP Professional Version 2002 Intel Celeron Processor 1000MHz 996MHz, 256Mb of RAM External Modem, Connected via LAN Cable
I bought myself a LAN Cable.I plugged the LAN Cable into a single port router (one computer at a time) through an external Modem, and it worked great for about a month. I tried to open a page, and a message said: Problem Loading Page. It had all the usual [U]ww.google.co.uk[U] and www.goggle.co.uk, but mine was correct. In the Taskbar (bottom right hand corner) it came up with an image two computers with yellow dots transferring between them, and then it changed to two computers with a caution sign. I hovered over it and it said: Limited or No Connectivity. So I did the obvious thing, checked cables were plugged in, unplugged cables, restarted modem, restarted computer e.t.c. but it still said Limited or No Connectivity. I went into Local Area Connection Status, and it said, Limited or No Connectivity...to renew IP Address, click "Repair". So I clicked repair, and it said could not renew IP Address, please contact Service Provider. I rang the service provider, and they said unplug everything plug it in and retry... This didn't work. Since then I’ve tried things I’ve seen on Forums, and on websites:
I was listening to the audio on my laptop through headphones. Today my audio just stopped working. The headphones belonged to my friend and I can't find mine so I can't to even test to see if it is the speakers. Does the computer think the headphones are still plugged in by chance?
I uninstalled a program I thought I didn't need - something about "stereo" which I thought I had recently installed. it being that time of the month, I ran my data eraser and overwrote all available hard drive space. So whatever it was its gone. Now my speakers don't work and the icon is missing.
I recently lost audio playback on my pc. It runs Windows XP and uses Creative SB Audigy Sound Device. It worked just fine until recently. I booted the pc up for the day and discovered no sound. Under "Device Manager" the device is listed as working properly with up-to-date driver. It is the only audio device that can be "un-installed" or "enabled/disabled" other than some "UniModem half duplex audio device" that is disabled. Under "sounds and audio device properties", "Audio Tab" the default playback device is listed as "modem line #3 playback". I tried to change the audio playback to the "Creative SB Audigy", but their is no other option than the "Modem #3 Line Playback". In the same, "Sounds and Audio Device Properties", under the "Volume" tab, it says "No Audio Device".
I've adjusted the volume, and it's not on mute, but it's still not working. Was working fine, then all of a sudden just stopped. Please let me know if you can think of anything that might help.
I have Windows XP, and my tab key stopped working. I can use it with the Alt. key to switch between windows, but I can't use it to tab in a document or to move from field to field. Does anyone have a suggestion as to what I should do?
ive got an epson 1000ics all in one printer using windows xp home. For some reason, the scanner stopped working. I used to scan using the camera and scanner wizard because the scan button on the printer never has worked. Now it shows the printer being an image scanner but there's no little arrow beside it. I don't think it's being recognized, but the printer works perfectly. The error says the install shield engine (ikernal.exe) could not be launched. the rpc server is unavailable.
My screensaver just stopped and i cant get it to work again.I tryed changing screensavers and it still didnt work anyone know why i would just stop like that?
My speakers randomly just stopped working this happen a few months ago, but I was able to get tech support (i have a dell) after about 3 hours on the phone with some guy in india he some how fixed it, I no longer have tech support. My boyfriend did exactly what the tech support did but no luck. Saddly I cant watch any tv or movies or even porn. thatts the killer! untill i can get it work!
Dell dimension e520, and for some reason my dvd drive has magicly stopped working it will recognize that the dvd is in there but it wont play it! i found this out trying to play cod4 and ive also tried several movies and other games, none of them worked, ive uninstalled and reinstalled the software, i have gone into the device manager and haven't been able to find anything wrong there but idk im very good at this stuff.
Using windows XP Professional Service Pak 2. I Had AVG and Zone Alarm installed. Used Zone Alarm for firewall and AVG for antivirus.I just upgraded to the newest version of ZA and uninstalled AVG. Am using ZA for Firewall & antivirus.I have two computers connected via router. My computer is the one with the router in Internet connection.I installed ZA on second computer and deleted AVG as well. Computer 2 can see my system, share files and print, but on my computer I am unable to see the other computer or share printer/files. I added the computer 1's ip address to trusted in ZA firewall, but still nothing works. have also made sure window firewall is off.
Hey guys, first off I'd like to say I'm not a very smart computer person (I'm not a dumb one but don't understand a lot of the more complex stuff) and I'm mainly trying to help my brother figure something out.
I used Windows Pro for awhile but started having a problem with my sound settings (mic stopped working and since I'm a Counter-Strike player I kind of needed it back for CAL :P) so we decided after trying a new sound card, etc, etc that it was the settings (well, my brother decided that after checking on it, appearently something was reveresed for some reason?), anyways we went to install Windows Home and all went well on the installing it from the CD part, but once it got into the configuring part or whatever it kept freezing at the "Install Network" part. So after trying that about 20 times we started using the Pro version to see if it would work.... same thing. So now I'm back trying to get the Home version to work (basically just going through the motions that my bro told me to do) and it keeps freezing there
our lap top just stopped working last nite it just says insert boot disc and wil not continue to do anything the only problem is we do not have a boot dsic only the recovery windows disc but that does not seem to work for it either please help us we do not know what it is or to do
I've got a computer running windows xp and have not really had any problems until this morning,when i started the computer a message came up saying "windows explorer has stopped working.windows is collecting more information about the problem this might take several minutes" followed shortly by "A problem caused the program to stop working correctly windows will close the program and notify you if a solution is available".i can't access anything as the screen is completely black apart from the mouse cursor which i'm able to move,but theres nothing on-screen.does anyone know if theres a way to fix this?
Recently my alt+tab task switch has stopped working entirely, I believe it was after an update. I searched through the forums for quite some time and found a thread that went from alt tab being broken to a powertoy to help with alt+tab. I also saw some thing about the regedit menu but no help on what the values should be set to, I was hoping someone else has had this problem and knows either how I disabled my alt+tab or what i can do to get it back. to clarify at the moment holding alt and pressing tab does nothing. well sometimes it moves my selected area to the file section of firefox but that is it.
