I'm trying to run IIS 5.1 (on XP Pro) as a development server so I can test my ASP scripts before I deploy them.How do I set up the SMTP so I can test my form-mailer? I'm using Verizon OnLine DSL.
View 2 RepliesA while back before I knew better I gave a client of mine an active directory domain that ended in .org and did not exist on the internet at the time. Now, I'm discovering in the DNS event log at regular intervals errors about how the computers in the internal domain are unable to register in the DNS server of the web domain of the same name. So, my question is whether there is something I can do to change the Active Directory domain so that I don't get those errors anymore.
They're running Windows 2003 server standard with Active Directory, roaming profiles, routing and remote access for VPN, DHCP server, standard fileserver, and print server. I may have missed one or two things but likely I haven't. The server has itself as the primary DNS server though it's not the 127 address it's the actual IP. The secondary server is the router but I have the DHCP giving out the servers for opendns.com as options 3 and 4 after the Domain Controller and the router but I had the problem before adding the opendns.com entries.
Can a Windows 2003 Domain Controller communicate with a Windows 2000 Domain Controller? The reason I ask this is that I want to upgrade my Domain Contoller to Windows 2003, but want to have the backup Windows 2000 machine running as a backup Domain Controller.
View 1 Replies View RelatedI am trying to helpo an elderly lady with her PC. We cannot log on it asks for a password (admin or user never had one) no matter what we type in it says "domain not available". I have booted from an emergency disk; ran disk checks; etc but no cigar. We can't do a recovery or restore because w can't get on. She doesn't have any disks for her DELL laptop it was passed on from her daughter
View 5 Replies View RelatedI'm having a problem with 'Entire Network/Microsoft Windows Network' view!
So, I can normally see the domain, but when I want to see what computers are under that domain, it throws me an error (... not available. ...)!
I am going to add a node to a domain and was wondering if what I am going to do is correct. Right click on computer, select properties, computer name and change the workgroup to domain and enter the domain name. Is this correct?
View 3 Replies View RelatedI have a XP Pro PC that won't joing a NT 4.0 domain. It says the "domain could not be contacted". Also, I can map to drive shares on the NT server but ONLY if I use the IP address of the server vs the Server name.I know the PC is getting an IP properly. I can browse the Internet and everything under "ipconfig /all" looks right.Is this a problem on the XP machine or the NT 4.0 server?
View 1 Replies View RelatedI need to further limit the user accounts on a number of XP machines. Something in the lines of GP would be nice but I think that can be done only in domain environment? Anyways my questions is what are my options. I am looking for ways to lock the desktop, user preferences/customization etc.
View 7 Replies View RelatedI so screwed up tonight. I was trying to get rid of some nasty dll files that my sisters pc had been infected with..and they just would not go away.I got frustrated and went into the registry and started deleting any reference to these dll files and am now in deep trouble.I restarted windows (xp home version) and attempted to log in. Got an error that the system could not log me in because the domain "sallyslaptop" is not available. I tried booting into safemode, tried (unsuccessfully) to access the setup/bios (not that getting there would have helped me i don't think..) and just cannot get back into any kind of windows environment. she has huge projects due at school and all her data is there!! If i can just get to her documents and save those, then I will be happy. If i have to reload windows an dstuff, fine...just as long as i can retain her documents!
View 10 Replies View RelatedWhen logging users onto a workstation that is part of an Active Directory Domain on a SBS2000 controlled network I am having the following problem: unless the user or user's group is part of the local Administrators group the profile will not be loaded or updated correctly, especially as concerns desktop wallpaper or drive mappings.what am I missing in my group policy or security settings to let any member of the Domain Users group update their profile?
View 1 Replies View RelatedAs of now i am getting to know more about windows 2000. I have installed it on one of my old computers. How ever, i would like to set up a server w/ another computer running windows 2000. how do i create a domain with windows 2000?. I currently have a crossover cable, a data switch, and access to a router if necissary. please email me the answer as i will probably never look at this thread again
View 1 Replies View RelatedThis problem pops up at my office every time we add new users. When we create a new account and proceed to log the new user in at an existing workstation, some workstations won't log the new user in. We get the error that the user can't login because their profile is not found. We have a handful of machines that will complete the new login, create the new profile directory and thereafter the user can login anywhere. Again it's only some workstations. All of the computers run XP Pro, the server is a Win2k3 running Active Directory. We've unjoined and rejoined to the domain.
View 3 Replies View RelatedA new wireless implementation we've setup at one of our high schools.We have a 140 HP 6515B laptops running XP SP2 connecting to cisco access points using WEP encryption. All the 32 access points are centerally managed by cisco software and use one seemless SSID across all of them. The laptops have the WEP key entered and saved to them and they've all be successfully connected to the WAP. The Microsoft Wireless Zero client is handling all the wireless configuration on the laptops.Is there any special configurations you have to make to enable wireless on a laptop joined to a domain? Some setting that triggers connectivity it at the login screen?
View 4 Replies View RelatedI have an XP machine that I'm trying to setup as a fileserver, but when I go into permissions, the only thing that shows up is the local machine, not the domain or any of it's computers.
-Is the computer connected to the domain: Yes.
-Can the computer ping other computers: Yes.
-Can the computer access other network shares? Yes.
I am trying to set up a shared folder on an XP pro machine and give permissions to only certain domain users. Problem is when I go to permissions, then "Add" then the only location I can see is the local computer - no option to see in the domain for users/computers on the domain. WIN2000 clients bring up the option of the local computer name and the domain no problem.
View 2 Replies View RelatedYou may experience extremely long delays (up to 5 minutes) when logging into domains using Windows XP Pro. This is caused by the asyncronous loading of networking during the boot up process. This speeds up the login process in a stand-alone workstation by allowing the user to log in with cached logon credentials before the network is fully ready.To disable this "feature" and restore your domain logons to their normal speed, open the MMC and add the group policy snap-in. Under Computer Configuration-->Administrative Templates-->System-->Logon, change "Always wait for the network at computer startup and logon" to ENABLED.
View 9 Replies View RelatedI have a peer to peer workgroup lan at home; and all the pc's are in win2k pro; well, i was trying to setup win2k pro on a new pc for my niece; i use tuneup utilities and in the options screen for automatic logon, it shows the computerid as the domain name; thinking that i m not in a domain, i changed the value to workgroup and now windows cant let me log back in, even in safe mode; how can i get to a screen where i can change the domain name to what it should be? the login screen only shows username and password fields.
View 1 Replies View Relatedoperation system Windows XP home edition.Had no problems then I suddenly get the below issue when trying to log in.The system cannot log you on now because the domain STUDY is not available.STUDY is the name of my domain.However when logging in SAFE mode with networking I am able to log in to the account!
View 4 Replies View RelatedI have a Compaq Presario R3000 (DL273AV) laptop with Intel Pentium 4 (2.8Ghz) and XP SP2 I use AVG Antivirus and adware/spyware programs diligently every week to find and clean any dirt All 5 users on this laptop suddenly yesterday found out they have to enter their passwords, they did not set any up! When you click any passord field and enter it you get"System could not log you on because the gigamesh domain is not available"
We rebooted, tried different passwords to no avail Nobody got any attachments in any email..last user was my aughter We connect to the internet using the new 2wire dsl gateway (2 Wire is the company name)for that 12.99 ATT/SBC deal And this laptop is the only one connected to the I searched some places but could not find this problem I'm as you imagine open to ideas!
I have installed this OS on a new Fujitsu PRIMERGY TX150 S4. Now I want just to use this Server as a server on a Workgroup. But the OS insists that it should be the Domain Controller. And then it just shuts it self down. Below is a log from the event viewer. Just don't really want to configure the entire Lan from workgroup to Domain.
View 6 Replies View RelatedRunning a windows 2003 Domain environment. The users on the workstations have all been Local Admins on their workstations for a while, and now I want to revoke that and make them regular users. The goal is no installation of unauthorized software, including unintended installs of malware.Problem - ActiveX on websites is simply not working. I can't figure out which GPOs to set to allow ActiveX to install/run for specific content/sites. Is there a way to use Group Policies to allow ActiveX content to run on Trusted Sites? I see tons of settings in GP, but none seem to work.
View 1 Replies View RelatedThis will most likely be a "here we go again" type of thread, but I have not found any newer developments on this.Have a Dell Lattitude D610 laptop, running Xp Pro, SP2. Recently, I inadvertantly changed the net settings to workgroup, to set up a home network. Once this was done, I can not log on to the machine.History: this is a work laptop, however, the HD is mine (had viruses, so the company gave me a new HD). The two HD's were both from a master image Obviously, I could send the HD back to the techies at work, however, this is a 5 year old HD that we are talking about.I tried ophcrack to get the admin password, but none was found. There was a guest account, with no password, but it would not work.
View 4 Replies View RelatedI have two computers, one with windows 2000 advanced server just installed, the other with windows xp pro sp2. I want to have a domain with 3 accounts: administrator (of course, me) and two other users. I want it so if I change my desktop on one pc, I can log off that pc and walk over to my other computer and log on and theres my new desktop. I just want the pc running xp pro to receive all the rules, settings, desktops, etc from the server.
View 2 Replies View Relatedit is possible to log on to a domain with a fingerprint reader? If so how do you go about it. A couple of sites said it was possible but would not say how..the important part.
View 1 Replies View RelatedWindows 2000 Server SP4, XPPro SP2. Is it possible to enable Remote Desktop for all computers in the domain via Group Policy?
View 2 Replies View Relatedone of our clients computers has "SOMEHOW" joined a domain and is no longer able to log in localy. He is unable to log in the gui in safemode but can get safemode command line. Is there a command that he can run to set him back into a work group? I say he has a virus but his computer is 350 miles away and Im not able to see it locally.
View 1 Replies View RelatedWhy am I unable to see domain users in client pc running windows xp when I am trying to give permission to a domain user?
View 2 Replies View RelatedI know the wizard will not work, but I was wondering if it was at all possible to manually configure the pc's so it would work.
View 14 Replies View RelatedI have a computer (Dell) running WIn xp pro (sp2- i think) that my work gave me when i left there, saying it wasn't worth giving back. I used it to work at home and login to thier network.the other day, i was messing around with OUtlook to change it from the work email to my personal email and did something ( i don't know what), but when i turned the computer on a couple days later, I can't login.There is only my login and password boxes, but the 3rd box which was the ?domain box, isn't there anymore. It won't accept any password.I have no restore disk, no xp disk. I have been using it for several months and its been fine. whatever i did in outlook screwed it up and did this.what do i do to be able to login again and use the computer?
View 4 Replies View RelatedI want my company background and screensaver files out to every computer in my company local network so that it will be able to to set those in group policy.
View 4 Replies View RelatedCan anyone tell me how i can allow my Win2K domain users to add local printers to their XP Pro workstations? I've tried eveything I know in local machine accounts and domain GPO security and nothing works. I cant believe that there's not a way to do it, but Im about ready to give up. If the local users can add network printers, why should it be so difficult to add local printers?
View 1 Replies View Related