A couple of my programmes have stopped working recently (AVG and itunes are some of them). I removed them and tried to install them again only to find out that installation had failed. My friend said it is to do with my registry. Anyway this is the error report I get when I try to load itunes.error signature
AppName: itunes.exe AppVer: 7.1.0.59 ModName: quicktime.qts ModVer: 7.1.5.120 Offset: 00104b0d
When I reinstalled XP everything seemed to work well. No error messages, until I was contacted by MS Update that updates were ready for download. There were 77. It seems they download just fine, but during 'initializing installation', the screen abruptly changes to a list of files that failed to install, which is all 77. I then attempted to shut down the computer and reboot. No change. I tried installing one at a time. No difference. I tried installing in numerical order. No change. There is no error message other than 'Some files failed to install'.
View 7 Replies View RelatedI have a large amount of the above named files as a result of MS patches and updates. If these patches and updates were successful, and apparently they were, as I have received no indications otherwise. It's my understanding that these files are used to reverse or uninstall a failed update; Is that correct? How can I verify that all patches and updates were successfully applied? I've had no trouble after installing these, so I'm assuming that all is well. So the question is, How do I remove these $NTUninstallKB******* files?
View 6 Replies View RelatedI have Windows XP Home installed on my computer as my OS. Recently, I've been cleaning out my computer by uninstalling programs that I haven't used for a while. However, the uninstallation of some programs fails. For example, I have a software called JapaneseNow! (to learn Japanese) installed on my computer. However, trying to uninstall it pops up the error message that "Uninst.isu" cannot be found and therefore the uninstallation cannot continue. I already cleared off a software called SpanishNow! beforehand, which may have caused Uninst.isu to be cleared....
View 8 Replies View RelatedMy computer has stopped working all of a sudden. It does not even start when he turns it on. It was working perfectly the night before and when he turned it on the next morning, it just did not start. He says that it never gave any warnings or error messages and this was the first time. Could this be due to the power cord or the power supply?
View 3 Replies View RelatedI'm working on computer (windows xp) and notice the cd-rom is no longer working.
I've tried a couple of things that were recommended through another site.
1) I turned "SAFE MODE" on and the cd-rom worked fine but when I got out of safe it wound not fire up.
2) I uninstalled the cd-rom and let the computer reinstall it but that did'nt work either. Please any help you could give me would be great.
I decided to clear the dust out of the inside of my
computer tower today. After cleaning out all the dust, I turned on the
computer for the first time and I noticed the fan on the side had stopped
operating.
But I have a Nokia Tower/case if that is of any help to anyone. It's the
colourful fan on the side which has stopped working.
My USB devices were working fine untill I went to Windows Updates and downloaded all the latest updates. This is when all my problems started. Now when I plug in a USB device I get a balloon on my task bar stating that my "USB device is not recognizied". I have done all the troubleshooting. I have XP PRo with all the latest updates.
View 1 Replies View RelatedI am running XP with SP1 and SP2.My high speed USB 2.0 stopped
running at high speed. When I attach a device it indicates that device would
run faster on high speed.
My ipod shuffle which has been working normally up until this point is now
only recognized as SMTP 3500 - personal class recovery device
I have tried updating the drivers and have had no luck.
What happened was this: I loaned my computer to a freind and told him, "Don't install anything without checking with me first!" He did, for about half the stuff I took off after I got it back.And my alt-tab has stopped working. The thing is, it works fine for the other profile on the computer. I'm assuming the problem is a registry setting somewhere. I looked and compared but I couldn't find anything out of line. So now I'm at a loss. I know I missed something somewhere. Oh, and I'm using WinXP SP1 on a Compaq Presario 2100, which I update on a regular basis.(This is a loptop I use as a "loaner," not my good one with all my personal stuff on it, by the way. Maybe I should get a copy of Norton Ghost before loaning it out again.?
View 3 Replies View Relatedi'm having an issue with a laptop i recently updated to windows xp pro sp2. before this, the laptop was connecting to the internet using cox cable and also using a router to connect an xbox360... after the install which went pretty smoothly i tried all i knew to get the internet up and running again. still nothing. i did everything by the book. i was just wondering if someone had time to give me a step by step... if not i guess ill go somewhere else. but id rather hear it from the real ros on the internet.
View 1 Replies View RelatedI need to reinstall XP, but don't want to have to reinstall all my programs + games. I've installed XP and programs to my C drive, games to another partition. My question is, will a complete image backup of C and a registry backup be enuff to restore a fresh installtion to how it was working programs + games and all?I've read around the forums and already downloaded TrueImage for files and Erunt for registry..
View 2 Replies View RelatedFor some unknown reason my screensaver just stopped working about a week ago. If I hit the preview button it works fine but when I wait for X amount of minutes for it to turn on it never does. I use it so that it will log me out automatically and auto turn off my monitor after so long, it is very handy.
View 3 Replies View Relatedmy toolbar stoped functioning. I have windows XP and l could of done something by mistake but l'm unable to get it working once agian.
View 3 Replies View Relatedmy keyboard got messed up and stopped working. When I was messing around with the back of the tower to try to fix it, I somehow killed my sound off too. Eventually, I got a new keyboard, but after adjusting with the stuff on the back of the computer tower the sound still didn't work.
Since my sister's computer specs and mine are the same, I checked out the device manager on both of the PCs to see what was missing from mine. I found out that it was a "Realtek AC'97 Audio" listing. So of course, I google it up and download what I find. However, after installing it, it still doesn't work. It doesn't even show in the device manager! And to make matters more confusing, when I start up my computer, it says that I can press Shift+F10 to configure it. When I do that, a DOS-like menu pops up where I can change a few options but nothing I change will get the sound working.
When I go to Accessories --> Entertainment --> Volume Control, it says that there are no active mixer devices available.
I don't think it's related to viruses or spyware. I've scanned multiple times with TuneUp, Spybot, Ad-aware, Norton, and a few other programs.HiJackThis information:
Logfile of HijackThis v1.99.1
Scan saved at 5:58:14 PM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
(Also, I have no clue why it says WinNT 5.01.2600 on the platform listing. That started happening when I was working with the TCP/IP connections, though it's not important as of now.)
If you need me to post any other hardware listings or, well, anything about my computer, just ask.
The sound on my PC stopped working about a week ago. Hadn't installed anything in at least the few weeks before it stopped.
I decided to re format the PC a few days later thinking that it would be fine, which initially it was, am running XP professional. Windows did all its updates as per normal and the sound stopped again.
Reinstalled the PC yet again to try and get to the bottom of things and this time went through things a bit more slowly. Did it's first lot of updates, was fine after those. That was yesterday that they updated. Tonight installed Service Pack 2 and thats when it has stopped.
In the Sound and Audio Devices section of the Control Panel it is saying there is no audio device installed, yet I had installed it via the CD that came with the motherboard. Soundmax sound on an ASUS k8v SE deluxe motherbord. why something like this may have happened?
I downloaded Diskeeper 2007 Pro Premier for a free 30 day trial, decided I didn't want it, uninstalled it and now my XP Pro Defrag has ceased to work any longer.
I get some weird message that it can't initialize and that I must have downloaded a different version .
guess the two were fighting each other.
Point is, can I download MS Defrag as a stand alone (Googled but no luck) or do I have to reinstall XP all over again...
Also, is MS Defrag good enough are does Diskeeper do a better job for the averge home user?
System Information:
Microsoft Windows XP Professional
Version 2002
Intel Celeron Processor 1000MHz
996MHz, 256Mb of RAM
External Modem, Connected via LAN Cable
I bought myself a LAN Cable.I plugged the LAN Cable into a single port router (one computer at a time) through an external Modem, and it worked great for about a month.
I tried to open a page, and a message said: Problem Loading Page. It had all the usual [U]ww.google.co.uk[U] and www.goggle.co.uk, but mine was correct. In the Taskbar (bottom right hand corner) it came up with an image two computers with yellow dots transferring between them, and then it changed to two computers with a caution sign. I hovered over it and it said: Limited or No Connectivity. So I did the obvious thing, checked cables were plugged in, unplugged cables, restarted modem, restarted computer e.t.c. but it still said Limited or No Connectivity. I went into Local Area Connection Status, and it said, Limited or No Connectivity...to renew IP Address, click "Repair". So I clicked repair, and it said could not renew IP Address, please contact Service Provider. I rang the service provider, and they said unplug everything plug it in and retry... This didn't work. Since then I’ve tried things I’ve seen on Forums, and on websites:
Start>Run>CMD>C:>ipconfig /release
It Showed
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IP Address . . . . . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . :
I then tried C:>ipconfig /renew
Windows IP Configuration
An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out.
I am unsure what to try next?
I was listening to the audio on my laptop through headphones. Today my audio just stopped working. The headphones belonged to my friend and I can't find mine so I can't to even test to see if it is the speakers. Does the computer think the headphones are still plugged in by chance?
View 4 Replies View RelatedI uninstalled a program I thought I didn't need - something about "stereo" which I thought I had recently installed.
it being that time of the month, I ran my data eraser and overwrote all available hard drive space. So whatever it was its gone.
Now my speakers don't work and the icon is missing.
I recently lost audio playback on my pc. It runs Windows XP and uses Creative SB Audigy Sound Device. It worked just fine until recently. I booted the pc up for the day and discovered no sound. Under "Device Manager" the device is listed as working properly with up-to-date driver. It is the only audio device that can be "un-installed" or "enabled/disabled" other than some "UniModem half duplex audio device" that is disabled. Under "sounds and audio device properties", "Audio Tab" the default playback device is listed as "modem line #3 playback". I tried to change the audio playback to the "Creative SB Audigy", but their is no other option than the "Modem #3 Line Playback". In the same, "Sounds and Audio Device Properties", under the "Volume" tab, it says "No Audio Device".
View 14 Replies View RelatedI've adjusted the volume, and it's not on mute, but it's still not
working. Was working fine, then all of a sudden just stopped. Please let me
know if you can think of anything that might help.
I have Windows XP, and my tab key stopped working. I can use it with the Alt. key to switch between windows, but I can't use it to tab in a document or to move from field to field. Does anyone have a suggestion as to what I should do?
View 4 Replies View Relatedive got an epson 1000ics all in one printer using windows xp home. For some reason, the scanner stopped working. I used to scan using the camera and scanner wizard because the scan button on the printer never has worked. Now it shows the printer being an image scanner but there's no little arrow beside it. I don't think it's being recognized, but the printer works perfectly. The error says the install shield engine (ikernal.exe) could not be launched. the rpc server is unavailable.
View 6 Replies View RelatedMy screensaver just stopped and i cant get it to work again.I tryed changing screensavers and it still didnt work anyone know why i would just stop like that?
View 1 Replies View RelatedMy speakers randomly just stopped working this happen a few months ago, but I was able to get tech support (i have a dell) after about 3 hours on the phone with some guy in india he some how fixed it, I no longer have tech support. My boyfriend did exactly what the tech support did but no luck. Saddly I cant watch any tv or movies or even porn. thatts the killer! untill i can get it work!
View 6 Replies View RelatedDell dimension e520, and for some reason my dvd drive has magicly stopped working it will recognize that the dvd is in there but it wont play it! i found this out trying to play cod4 and ive also tried several movies and other games, none of them worked, ive uninstalled and reinstalled the software, i have gone into the device manager and haven't been able to find anything wrong there but idk im very good at this stuff.
View 10 Replies View RelatedUsing windows XP Professional Service Pak 2. I Had AVG and Zone Alarm installed. Used Zone Alarm for firewall and AVG for antivirus.I just upgraded to the newest version of ZA and uninstalled AVG. Am using ZA for Firewall & antivirus.I have two computers connected via router. My computer is the one with the router in Internet connection.I installed ZA on second computer and deleted AVG as well. Computer 2 can see my system, share files and print, but on my computer I am unable to see the other computer or share printer/files. I added the computer 1's ip address to trusted in ZA firewall, but still nothing works. have also made sure window firewall is off.
View 6 Replies View Relatedwe had to remove Visual Studio 2005...when uninstalling VS it tells you to unistall portions in order...we did that and now nothing is listed in Add/Remove Programs relating to VS at all...however, in the start menu there is MS SQL Server 2005 configuration tools...when you reboot windows xp you get an error saying SQL Server could not start...well, we don't want SQL Server 2005 on there and are trying to remove it but it is not listed in Add/Remove at all...can't find anything relating to this at all.how do we remove SQL Server 2005 configuration tools?
View 6 Replies View RelatedI am experiencing a strange problem when attempting to uninstall programs from Control Panel --> Add / Remove programs. When I attempt to uninstall a program, the corresponding programs "uninstaller", asks for a network resource. Here is an example screen shot of what I am seeing when I attempt to uninstall Ad Aware: It doesn't seem to matter what I am attempting to uninstall. In all of the uninstall scenarios that I have seen Add / Remove programs asks for an MSI file with a similar name to the program that I am attempting to uninstall.
View 1 Replies View RelatedHey guys, first off I'd like to say I'm not a very smart computer person (I'm not a dumb one but don't understand a lot of the more complex stuff) and I'm mainly trying to help my brother figure something out.
I used Windows Pro for awhile but started having a problem with my sound settings (mic stopped working and since I'm a Counter-Strike player I kind of needed it back for CAL :P) so we decided after trying a new sound card, etc, etc that it was the settings (well, my brother decided that after checking on it, appearently something was reveresed for some reason?), anyways we went to install Windows Home and all went well on the installing it from the CD part, but once it got into the configuring part or whatever it kept freezing at the "Install Network" part. So after trying that about 20 times we started using the Pro version to see if it would work.... same thing. So now I'm back trying to get the Home version to work (basically just going through the motions that my bro told me to do) and it keeps freezing there
