How can I determine if I have a video card installed in my pc that supports dual monitors?And if so, will using a VGA splitter cable allow me to use either of them for differnt task?
View 1 Replies
i plugged in my secondary monitor and my primary quit working, now the secondary shows the screen but my primary just has a box floating around that says self test feature check... i just want more work space, can someone help me?
View 6 Replies View RelatedI'm using a Sony laptop and have an external screen attached. I've set up XP
to use both the external and built in laptop screen and also checked the
"Extend my Windows desktop on to this monitor". This all works ok with one
exception.
As I sit in front of my laptop the external monitor is to my left. In order
to get the mouse on to the external display (on my left) I have to drag my
mouse pointer to the far right of the laptop display.
I've tried making the external monitor the primary display but this doesn't
help me either.
Is there a way I can tell XP that I want the mouse to move to secondary
display when I drag the it to the left hand side of my primary display?
i have a pc with 2 ports for monitors i am using the dvi ouput to my plasma
tv (through a dvi to 15 pin converter) which works fine. however i cant seem
to get my other 15 point outlet to work.
I am assuming i have to activate some sort of dual monitor software? I am
using xp
basically how do i use 2 monitors simultaneously
I have windows XP home on one of my machines, what will i need to setup dual monitors?? My video card doesnt have tv out or anything.
View 8 Replies View RelatedI have two monitors at home and at the office and both work fine at either place. But when I connect from home to the office via VPN, I can't get two monitors to work.
What do I need to do?
I'm using a Sony laptop and have an external screen attached. I've set up XP
to use both the external and built in laptop screen and also checked the
"Extend my Windows desktop on to this monitor". This all works ok with one
exception.
I've tried making the external monitor the primary display but this doesn't
help me either.
Is there a way I can tell XP that I want the mouse to move to secondary
display when I drag the it to the left hand side of my primary display?
I'm using a HP laptop with a second monitor. When I disconnect the extra monitor, programs still "load" on that system. How do I move them back to the laptop display.
View 7 Replies View RelatedI have read my motherboard manual and I found out that I have the ability to use dual monitor support.
I used it on another laptop that I had and it worked well except the screen resolution changed and I had to reset it.
I now want to use dual monitor support on my desktop computer for power points and other things but I think i may need a DVI to VGA adaptor which I might buy. Is this the right thing to do. Will I need anything else apart from this adaptor? I can see a DVI port apart from my VGA port in my pc.
I don't have the connectors mentioned in the motherboard manual. (pg18 under graphics card)
ftp://174.142.97.10/manual/ConRoe945G-DVI.pdf
I can see a DVI port apart from my VGA port in my pc.
After I get that part right can I run extend my tasbar and desktop onto that monitor.
I have a Dell Lattitude C840 laptop with an Nvidia video card installed by
Dell.
Whenever I plug into a LCD projector and activate my external monitor the
dual monitor feature comes on and I cannot disable it.
Some times I want to run dual monitor with the laptop (such as for
lectures), however, sometimes I want what appears on the laptop screen to be
the same as on the projected image.
I have tried going into the Display Properties and Settings to disable the
second monitor and when I do all that happens is that I go back to only
seeing my laptop's monitor and nothing on the projector. When I activate
the external monitor the dual monitor feature kicks on again.
It never used to do this and I am not sure what changed on my system.
suggestions?
i have read that you have to buy a certain part with dvi something or other to get dual monitors, but the part that my monitor pluggs into now (ima call it the monitor outlet) if i took a monitor outlet out of my old computer and put it into my current one so that i have 2 monitor outlets.
would that work?
Any one have any suggestions on remote controlling a PC with dual monitors
From a PC with dual monitors .
I have an old Compaq 1200 laptop. It had Windows ME when I got it. I noticed when I first turned it on, the display properties showed that there were 2 monitors when really there's only one (the LCD screen). And the desktop is larger than my laptop screen, so I have to place the mouse on the edges of the screen to get to the rest of the desktop. I figured once I wiped it and installed XP it would go away, but it isn't. I don't see anything in the BIOS either, the BIOS is pretty limited.
Has anyone seen this before?
I have a dual desktop set up (2 monitors) and I'm wondering is it possible to have a different wall paper for each desktop?
I have a: ATI Readon 9550 256 mb (AGP) and I'm on Windows XP: Home edition.
Also I just got the latest drivers for this card.
Are you experienced in Linux ubuntu? Click here please!
I'm running XP Pro, and for some reason I can't seem to get dual monitors set up properly. I'd like to have 2 monitors set up so that they are identical copies of each other. However, everytime I enable the second monitor in the display properties windows seems to insist on wanting to have that set up as a second monitor to "extend" my desktop.
Is there some hidden registry tweak that I have to set?
Any ideas?
I have two monitors set up, and I'm trying to get it so I can be playing a game or using a fullscreen application like Vegas while typing something on the other monitor. I tried doing this, but clicking on the other window that I want to type in makes it the active window and minimizes whatever else I'm doing on the first monitor. Is there any way to either
A) Edit a text document without making it the active window, or
B) Allow both monitors to have active windows at the same time
Is it possible to do any of those?
I have dual monitors on my work computer and use them to access two
applications simultaneously.I use my home computer to connect to my work
computer using remote desktop.If I set up a second monitor on my home
computer
Is there any way I can use the 2 monitors on the home computer in
the remote desktop environment?
When switching between dual and single monitors, how do you save the positioning of the monitors so I do not have to reorient the two monitors under display properties settings?
View 2 Replies View RelatedWindows XP, SP-3, 500 Meg memory, Nvidia video controler.
After a windows reload some programs pop up off the screen to the left and cannot be seen. The second montor is to the right. Both work and display fine. How can I eliminate this phantom third screen? If anyone thinks they might have a solution I can provide more details.
well i was having trouble with my mouse as if it was on another screen and this had happened to me once before when i reinstalled xp after my computer got messed up so i was screwing with the display dual moitor settings and me being the complete fool that i am i selected the 2 monitor and put it as my primary well now i can not go back and change it if any one of you can tell me how to change it i would be very pleased
some specs that might help are these i am on a dell xps 400 running ops xp media
I have 2 Acer monitors hooked up to my X800 and sometimes after turning themselves off while I was afk only one will come back on when I return to the PC. Turning the monitor on/off doesn't help, nor does opening a window that I know is open on the monitor that is off. Any ideas? The screens do work correctly after reboot.
View 1 Replies View RelatedI'm running two lcds that has my desktop sctretched across both. However, everytime I shutdown or get a system pop-up, it's centered and distorted between the two monitors (as that is recognized as the center of the screen). I just wondered if there was a way to specify the center of one monitor or the other for these pop-ups?
View 2 Replies View RelatedI'm running a dual monitor setup with with Windows XP and a NX6600GT-VTD128 graphics card. Though in my searches, I've come to the repeated answer that what I'm wanting is impossible at this moment in time I suppose it never hurts to ask anyway.
I want to be able to run full screen applications on one monitor and switch to applications on the other without the fullscreen app collapsing to the desktop. Is there any way to do this?
I understand that the alternative to this to just run the full screen app in windowed mode, but not all programs support this. Is there any third party software that can force a program to run in windowed mode?
I'd greatly appreciate any insight anyone may have..thank you for taking the time to help me.
I have a dual monitor setup with the primary to the left of the
secondary monitor.Sometimes when initially opening Word it will appear
just of screen at the top left corner of the Primary monitor. I can
bring it back on-screen by maximizing it from the taskbar, but it
disappears off-screen when I restore it.The only way to bring it back
is to change the monitor settings to temporarily place the secondary
monitor at the top left corner of the primary.Then Word appears back
on the secondary monitor.I can then change the settings to move the
secondary monitor back to the right of the Primary and Word follows it.
Is there a way to prevent this? or a better way to bring Word back
where it belongs?
At work I have a PC running WinXP x64 with dual monitors
At home I have a PC running WinXP with dual monitors
(Both have SP2)
I would like to use Remote Desktop Connection to work from home, on my work computer, USING dual monitors.
Right now the remote window opens (with the size of one monitor) while spanning both monitors. IE Half of the window is on one monitor, the other half is on the other monitor.
I can't seem to expand the window to span both monitors.
(I've tried doubling the deskwidth resolution in my .rdp file.)
Has anyone managed to accomplish the above? With my setup?
How would I move the taskbar from the left to the right monitor? The extended desktop doesn't have a task bar and it is mounted vertically (for easier viewing of PDF manuals). I would like to be able to move it but doesn't do it if I drag across and drop....
suggestions?
problem is single-screen games. When launching a game, I would want for the 2nd monitor to stay on desktop and not get "included" in the game. Included as in going into standby / power saving mode.Can this be bypassed? I understand it must be quite impossible to use the mouse on the 2nd monitor while in-game on the 1st monitor, but I would at least want to see the desktop and the real-time programs that are running there (virus scanners, time, IRC etc.).
When I exit the game, or alt-tab, the 2nd monitor automatically returns from power save and all is normal.
Some specs if needed:
GF 8800GT 512
Core2Duo E6600
LG Flatron L1953TR as 1st monitor
LG Flatron L1952TQ as 2nd
WIN XP Pro SP3
I created several folders on my desktop for pictures sent to me in Outlook Express. After I transferred these pictures to their correct folders I wrote them to a CD. I deleted all the folders from my desktop except one. I keep getting this error message that I cannot delete this particular folder because it is being used by another person or program and to close any programs that might be using the file and try again. I've closed all programs and no one is using this file and still I can't delete it. I have Windows XP Home Edition.
View 3 Replies View RelatedI downloaded an .exe file but cancelled the download before it finished. Now, it's sitting on my desktop and I can't delete it. For the past few days, it kept saying that the file is being used by another person or program. Even though the list of applications in the Task Manager was empty, I still couldn't delete it. I wasn't familiar enough with the processes to know which process to end, but I've a hunch it's explorer.exe. Now when I try to delete the same file, it says that it is not a valid Win32 application. FYI, I've tried using Killbox to delete it but it didn't work. Is there a way to delete this file?
View 6 Replies View RelatedI have a XP system that I thought I had fixed (random rebooting) this is pasted from my last post....
Now the machine.... Antec case with true 380s power supply, ABIT AV8 board,2 sticks of pc3200 512 mb ddr400 ram , Amd Athlon64 3500+ (not oc) ,Nvidia geoforcefx 5900xt card running XP Pro with SP1 installed.
What I have tried ...ran antivirus , ran spywarecleaner, defrag, ran memtest,adjusted to failsafe defaults in bios , flashed the bios, tried diff combinations of slots for memory, upgrade driver , upgraded via 4-1 drivers
A couple days ago figured it must be power supply (brand new one too) so I started unplugging devices ..second cd rom and fan pulled and everything has been running great since.Question before I drop $60 on power supply what should I look for , where is a good supplier and most important do you think this will solve the problem.
I am in the process of shoping around for additional RAM for my Dell 4600 Desktop. I have all the system stats I think I need to make sure everything matches, but I am not sure about latency, or timing. I have used the wizards on memory suplier homepages to determine what I need. Most answers come up with similar results, but modules vary in timing. Some are 2-3-3-6, 2-3-2-5 and others 3-6-6-8. Should all my modules be matching, and how can I find out what my present ones are. Is there an analysis tool I can run?
View 9 Replies View Related
