I've created a batch file to do specific tasks.The file works perfectly and does exactly what I want, but I'd like to have it run at startup on Monday morning.This is what I've got, but it runs at every boot instead of just Monday.
View 11 RepliesI run a specific batch file at startup that attempts to copy a file to lace one that is under control of a running program. I get the messageThe process cannot access the file because it is being used by anotherprocess."How do I successfully write the file? I know that the way you are supposed to do it is to close the program, make the transfer then restart the program. But how do you do that when you don't know the programand you don't know how it starts in the first place.
View 4 Replies View RelatedI was wondering if you gurus can give me some direction.I run a Specials Menu on a large LCD TV at a restaurant using powerpoint. There are two specials files (lunch.pps and dinner.pps)When this system reboots, i want a batch file to determine which powerpoint file to open based on what time it is.ON BOOTUP: For instance, if it's anywhere between 11am and 3pm, open the lunch file. If its any other time, run the dinner.pps file. Make sense?
Im already running a scheduled tasks application that shuts down one and starts up the other based on what time. This works very well. Problem is, i frequently Remote Desktop into this machine and make changes. Once those changes are made, i have to reboot the system. I then want this batch file to start the appropriate presentation since the scheduled task application only works when it sees 11am or 3pm (as in the example above)I figured since you can determine time and date within a batch file, can't you do an if /then/else type script within a batch? (if its *this time* then load THIS application)
I'm searching for a good solution of archiving scanned documents. The problem: Recently we bought a new copy-machine from toshiba. It includes the feature of scanning a bunch of documents on its own harddisk. To keep up a structure (Law-firm) we give the files structured names: {casenumber}{client}{typeofdoc}{dateofdoc}.pdf
So, by now we created a structured list of files in the scan-folder of the machine. The next step is to move the files into subfolders on a different pc. These subfolders have 6 digits, simply the case numbers. It should be very easy for a program to move these files paying attention to the case number and sorting them into the right case folders..................
What I want to do is create a .bat that will copy a file to several locations(all within the same folder, however with different names).
I have a folder that contains the master copy of my db and I want to run the batch file to update the users db files. The reason being is they each use thier own front end.
The system event veiwer in control panel says that about 80% of the error I have is because of a specific file name called TCP/IP. I went to windows help, and they told me to remove this protocol and then re-install it using the "network" option in Control Panel. But, if I knew how to do this, you wouldn't be reading this right now! I do understand that this is a very basic problem to overcome, and its just a matter of removing and re-installing.
View 3 Replies View RelatedI keep on getting a message saying: "Rundll Error Loading C:Windowssystem 32jbrdpufc.dll The Specified Module Could Not Be Found" at the Start Up.
View 1 Replies View RelatedI need some kind of program/batch file that will place the current IP address I have dynamic so it changes every two hours in a text file that I have specified. The text file would have to be in this way: I am using graburl to update my host of my location, so I thou ht that I could use graburl to do something like this. If it is not possible to include date and time in the text file it is not completely required. However the latest IP address would have to be at the top of the list not at the bottom This must also happen even if date and time columns are in the list.
View 10 Replies View RelatedMy company makes products that deploy on XP, like Kiosks. I need to be able to lock down my "application user" rights nice & tight, but leave my admin rights wide open. I find that GPEDIT effects ALL user rights, so when I want to prevent my app user from being able to right-click on the desktop (for example), if I got to GPEDIT > USER CONFIG > ADMIN TEMPLATES , anything I do there dorks up my admin user as well.These machines will not connect to a domain controller so they have to be locally administered.
View 2 Replies View RelatedI have had this problem for a couple of years now, even in a few different computers. I have a folder with files I am keeping, copying it from computer to computer when I change computers. In this folder I am unable to see folder/file names unless I mark them. This has irritated me to some extent since there are around 12-13000 files in this folder by now. I have asked around at computer-tech stores, and some of my more or less nerdy friends. One of wich is mostly always able to help me but not with this.
View 7 Replies View RelatedI am an old school PC user, since the days of old DOS. Back in the day, I used to make batch files and put calls into the autoexec.bat file to run them. Being the computer guru I am, I tried to show that to a friend of mine, but it didn't work!After a bunch of headache and heart break I realized the autoexec.bat file doesn't get called in WinXP. But there's an autoexec.nt file in the system32 folder! However that only gets run when you open CMD. I found a solution about installing a service called AutoExNT, which worked, but too late. The batch file I am trying to run needs to be run BEFORE I even get a logon prompt. It needs to be run either during or before the Windows XP logo load screen shows up. I tried the Win.ini file, I tried making a
View 13 Replies View RelatedI need to how to create a batch file for dos please help me
View 7 Replies View RelatedI created a batch file to eliminate files on start up, located in the temp. folder, and it is not functioning. When the computer does start up it eventually gets to the black screen showing the batch file with a message in milli-secs than it is gone. How can I stop this screen to see the message. I tried (Pause/Break) but to no avail. Need some guidance. OS XP Home SP2
View 4 Replies View RelatedI have a batch file (.bat) & how do I know if it's running or not? When I double click on the .bat file, it opens a second file. With no specified extension, in properties it is just a "FILE". So does that mean it is running or not?
View 3 Replies View RelatedI have a exe file in the Folder call FChart 4.0.1. I would like to write the batch script to check if FChart.exe exists in the FChart 4.0.1 folder then copy it to specified folder. NOTE: the issue is that I would like to have it generic therefore I want to avoid 4.0.1 and only look for FChart folder and then file inside. I've written script but it doesnt work and its not generating any error as well.
View 2 Replies View Relatedhow do i create a batch file to change the proxy in IE? a batch asking Home or Company is fine. If it is at work, then apply the proxy addresss and port and bypass proxy. Else, turn off proxy.
View 6 Replies View RelatedI am trying to make a batch file that will open the wireless application on my computer and run for a certain amount of time.
The information I gathered so far is:
When I go into cmd on windows XP and type the following;
Code: C:Program Files3 Mobile Broardband3ConnectWilogApp.exeThat opens up the application and automatically connects to the internet.
The next bit I will need it to pause there for around 65 seconds, Then I need it to do the following command;
Code: TSKILL WilogAppTo close the application.
If i double click the icon on the destop it opens a command window with the message, waits for input, i type a number and press enter and then the same message apears on the following line, i type again, press enter and the same thing happens. It doesn't work. If i enter in Total Commander go to the desktop dir and execute the same batch file. IT IS THE EXACT SAME FILE
View 3 Replies View RelatedI use a batch files for various maintenance stuff.Get this: When the batch file (.bat or .cmd), is in ONE PARTICULAR DIRECTORY, the defrag command in it echos endlessly, but doesn't execute. Even if the batch file contains only just the one line.If the batch file is in any other directory, it works fine. Of course, I keep all my batch files in the same directory ("C:Program FilesBruce"), and I can find nothing anywhere in Windows that should cause this directory to be any different than any other. Addition a few minutes later: Now the simple one-line batch file will sometimes work, sometimes not work, when in other directories. This is weird.
View 7 Replies View RelatedHow to create Shortcut with a Batch file?
View 1 Replies View RelatedI am trying to write a batch file to strip the 4 leading characters from the
name of all files in a directory. I tried using rename but was not having any
luck getting the pattern matching to strip the characters off. Please let me
know if anyone knows a way to do this in a batch file.
Would this shut down the PC agfter a 10 second delay? SHUTDOWN -r -t 10
View 6 Replies View RelatedIs there a command I can use to kill a process or end a program with CMD? Some people say taskkill but this doesn't seem to work.
View 1 Replies View RelatedIm trying to copy a file from one folder to another but the batch file is not working, it says incorrect syntax. the command line im using is: COPY C:TEST *.* C:BACKDIR Does anyone know why this isnt working?
View 2 Replies View RelatedI'm trying to write a batch file that will copy files from a folder on the desktop to various files on the C drive. From what I understand it should be like this: copy c:documents and settings\%userprofile%desktopinstallfilename.txt c:windowsfilename.txt
with %userprofile% in place of the actual user profile name because it will be different each time I run this batch file.This, however, is not working.
I'm running Win XP Pro SP 3, I have a file that I periodically copy to several different computers on a LAN. The exact destinations of the file change occasionally and I want to minimize the amount of maintenance involved when there is a change.
In the folder containing the file I have a shortcut to each of the destination drives. When one of the destination folders changes I update the shortcut in that folder.
If I drag the file to each of the shortcuts using the right mouse button one of the options is to copy the file to the target of the shortcut, so one way to copy the file is to manually drag it to each shortcut. Is it possible to achieve similar functionality with a batch file? It is easy enough to write a batch file that copies the files to each destination by coding the destinations into the batch file but is it possible to use a batch file to copy the file to the target of each shortcut? I suspect that parsing the .lnk files is complex but I don't know if there is another way to do this.
Please provide some tip or guidelines to help me with this script for me to reinstall MDAC.inf unattended. The script runs properly but the only problem is that, it'll prompt for "i386" folder originally in Windows XP cd. I've copied the whole folder to one of our network drive and was wondering is there any commands that could be added to the script above so that it won't prompt for the "i386" folder location so that no user interaction is required?
View 7 Replies View RelatedI want to automate the backup of our Retail Management Software database file. The Partner who installed it wrote a batch file, which works fine, but he put it in the Scheduler and it never runs. I did the obvious, checked for correct user name and password, etc. The process kicks off, says it is working, but never terminates and does not actually run the batch file. I tried calling the batch file with cmd.exe, but that doesn't work either.
View 10 Replies View RelatedIm trying to run a batch file and I get the message "Windows cannot access the specified device,path or file. You may not have the appropriate permissions to access the item." All accounts on the machine are admin accounts. Is there a setting im missing that should be turned on? Ive also tried running the batch file on a Vista home premium machine and get the same message. I tried on a Win XP Pro machine and it worked fine.
View 7 Replies View RelatedI tried searching Google, but it just gave me pages of irrelevant junk. I need to create a batch file, that when envoked opens a "windows Explorer" window, and goes to a specified folder. Anyone know what code will do this?
View 11 Replies View RelatedI am trying to write a batch file that will create subfolders based on the name of the parent folder. So if the folder that I am working in is named "dg2001-10-19" then I want the batch file to create 3 subfolders named "dg2001-10-19 - WTA", "dg2001-10-19 - BHMM" and "dg2001-10-19 - files". In the other folders that I am working in I want it to work the same way - for a folder named "disc" it would create "disc - WTA", "disc - BHMM" and "disc - files" and place them in the disc folder. If anyone can help me I would really appreciate it. I realize that this is probably a simple thing but I am not very familiar with programming or batch files.
View 6 Replies View Related