Setup Installation :: New Compaq Laptop Won't Install Windows 8
Feb 21, 2013
i have just purchased a new Compaq laptop, Notebook G as i'm aware of the title but unsure, though with the initial setup of the laptop it asks a few questions ie: name, location and login details for Windows, though i get an error message stating that "Windows 8 could not be installed on this device, please try again" or something of the sort.
after a few attempts i have given up.
it appears that it is faulty, though, it is difficult for me to get into a store and request an exchange, is this common?
I have a Lenovo B575 laptop that is not UEFI capable; however, I have downloaded the x64 Win 8.1 ISO, burned it to a bootable DVD and a bootable USB drive and tried installing Windows 8.1 using a boot from DVD and also a boot from USB drive, and neither method has resulted in a successful installation. The root cause of the installation problem is that Windows 8.1 is intent on creating an EFI partition structure on my non-UEFI machine.
So, I end up with a 300MB Recovery Partition and a 100MB EFI Partition which doesn't work well on my machine. Now, during the installation process, I opted to delete all existing partitions and allow the installation to properly partition the hard drive for installation; however, I knew I was in trouble when the machine started hanging during reboots.
Its a HP Envy laptop with a 1TB HDD running on windows 8. But the laptop has been having a lot of start-up errors and finally some files corrupted and windows wouldn't function properly. So I decided to reformat it to 8.1, a complete wipe to get rid of all the pre-installed HP crap.
So here's what I've tried, in the same order.
> I tried to install windows 8.1 through windows 8. -It failed after it restarted- > I tried to install windows 8.1 through USB ontop of the Windows Partition (There were 5 partitions). -It failed because of a GPT (If I remember correctly) Partition error- > I decided to delete all the partition and install Windows 8.1 ontop the entire 1TB disk space. -It started installing but then failed with an error code 0x80070057- > I tried diskpart through CMD to clean the disk drive then followed with a format to ntfs -It always just sticks on 0 percent%- > I tried all the same steps with Windows 7 -The exact same errors happen-
I've got one last option, plug the HDD into my desktop and try to format it that way but this is a lot of work so I'd like to keep it as a last resort.
My Vista running laptop recently died. It boots as far as the screen saying it didn't boot properly last time and suggesting I boot into Safe Mode etc. Whatever I chose it doesn't work. I can boot into Ubuntu via USB disc so I know the laptop is fine.
My laptop has a genuine Vista license key but I don't have any install or recovery discs. Is there any way I can install Windows 8 using the upgrade license while it is still cheap?
I bought a toshiba satellite with a preinstalled win 8.1. I formatted all that partitioned caos and installed my beloved well known Win 7. Now I have installed win 8.1 again via recovery discs, in order to have a dual boot. Is there a way to install the last image that I created of C:/Win 7 in a new partition? When I try to install it the only chance that seems to be is that of replacing C:/win 8.1. Software, change of Drive letters (how?).
I have a Dell Inspiron 15R SE 7520 laptop that came with Windows 8 Core edition pre-installed. This laptop has never worked properly for some reason. It won't shutdown the normal way (it'll just stay on the shutdown screen forever) and it never comes back from sleep without a BSOD along with other troubles that haven't been solved by updating drivers,etc.
I decided I want to do a clean Windows 8.1 re-install and upgrade on my laptop to get rid of these problems, but it's been ages since I last did this (back in Win2K times, I used to dual boot Slackware Linux) and I've bee reading about all this UEFI, Secure Boot,etc and quite frankly it's making me quite nervous. I was even planning on taking this chance to dual boot some linux distro, but it looks sooo difficult. Things are much more complicated these days for the tinkerer!
I need to make sure I can get back to a running system quickly.
For starters, here is how the hard drive is partitioned: [URL] .... And this is the Diskpart output : [URL] ....
Why do I have 5 partitions? I understand the recovery partition, the OS partition and (after lots of reading) the ESP partition, but I'm not sure about the others. What do I need to keep? I've been reading around and I see some people recommend wiping the whole drive and starting from scratch. Is this a good ide?
I'll create the installation media from a windows 8.1 MSDN ISO using a USB drive. When I start the installation process it will ask me where I want to reinstall it to. Do I just choose the OS partition? Won't the recovery partition be based on a Windows 8 image and be useless from now on?
What's the best way I can get back to a fully working system in case I screw up somehow? I've made an image of my drive using Macrium Reflect free edition. But I read here that I cannot make an image of a GPT disk. Will this image I made work for getting back to a working system quickly in case I screw up?
As a last resort, I've made a Recovery USB using the Dell Backup and Recovery Method. In the extreme case that I screw up real bad, will this work to get back a factory-state system even if I've wiped my hard drive clean? I'm assuming this tool is for users recovering after a dead hard drive so it should work , right?
I bought my wife a new VAIO Sony laptop. It came with Windows 8 installed. She has been using a Toshiba laptop with Win7. She wants no part of Windows 8. (She is 84 years old) & spends a lot of time on her laptop.
I want to put Win7 on the Sony VAIO. I don't want to save anything on it. I want to make a Clean install by reformatting the HD. However, I know you can not completely reformat the HD because of the "System Reserved" partition. How to do a factory reformat?
recently, i just changed my laptop's OS to Windows 8 from Vista. My laptop is Compaq Presario F700 and it was originally Vista. But somehow, my laptop cannot access WiFi anymore so right now im using our PC. Also, when i go to PC Settings-->Wireless it says that "No wireless devices are available". I tried downloading a wireless LAN driver in this site: [Broadcom Wireless LAN Driver for Microsoft Windows 8 | HP Support] since Compaq is also from the Hewlett-Packard Company(hp).but after installing it, nothing changed. what should i do?
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
My laptop originally had Windows 8 installed on it on an SSD and an HDD. I have since wiped the drive clean. But now, I need to get Windows 8 back for work. How can I replicate the original layout with Windows 8 being put on both a SSD and a HDD. The nature of my work involves a lot of CAD software usage for projects as well as research and the like. As such, I would like for such software to be located on my SSD for faster speeds.
Tried numerous times to install the update but keeps hanging when at "Applying PC Settings". It usually stops at around 84%, eventually the screen will go black only showing the cursor then finally it shows the bsod. The bsod says: driver power state failure.
i have a newish samsung laptop that came preinstalled with windows 8 but i need to format the stock hard drive and i was wondering how i would reinstall full windows 8 without a product key.
My asus Laptop, K55N-DB81 has Linux on it. BUT before I had windows 8 on it. Now I want to re-install Windows 8 on it, but I don't know how to. I didn't create any recovery disks , and the Product Key is embedded into the Bios. I know what the Product Key IS just in case I would have to enter it again. Do I need to get an iso. to boot from and then go from there or something?
I have Windows 7 64 bit Ultimate installed and activated. I am trying to upgrade to Windows 8 and the upgrade assistant tells me it needs at least 2gb when I have 8gb and Windows 7 sees and knows I have 8gb
I am thinking it could be my bios, but it's already at the latest version
Here are some photos from my bios, so you can tell me if there is anything I need to enable.
These are photos from my bios. I need to change to get this to work.
I bought a HP notebook with windows 8.1 installed , but no installation DVD . In order to create one I downloaded from Microsoft , ( from windows.microsoft.com/en-us/windows-8/create-reset-refresh-media ) the Windows 8.1 Setup ( file OSGS14-WindowsSetupBox-32bitand64bit-English-4141408.exe ) and ran it but always receiving the message : we can't connect right now . I have tried more than 20 times and failed.
I tried to install Windows 8 Pro on my Dell PC, but I didnt know the clean install was the best way to go and now my computer will not boot to the OS. It boots then goes black.
I am trying to install the Windows 8 DVD over the current XP OS, but in MyComputer, the DVD Drive isn't listed in the tree view. Device manager says it's installed properly and functioning well. My Q is this: how do I run the installation DVD from the DVD drive using the Command Prompt. On Windows Start-up I hit F12 to access the boot order, and when I arrowed down to the DVD drive and hit ENTER, Windows would just jump straight to the XP start-up process. It's like something won't let me access the DVD Drive.
Acer laptop already has Windows 8.1 installed. It has a MBR disk. My USB Flash Drive won't boot from it but it does my my desktop so not the USB flash drive.The flash drive was created for UEFI or MBR boot using Rufus. I tried the tutorial in sevenforums to convert the Acer to GPT but it says the boot drive is in use and can't. I tried to boot to a Command Prompt but that gives me an X: drive and I can't change it to C prompt. I have done this before from a boot drive and it worked but won't on this machine. How can I get this converted from MBR to GPT??? How can they make that tutorial work for them? They are doing it from within windows there??? This machine BIOS has nothing for legacy or UEFI or secure boot for sure. Is my only option MBR then? If it is what do I make the flash drive with as Rufus option says for UEFI or MBR but won't boot this machine. Yes I have it to boot first but it lights up but goes straight to windows.
OK, I have an Avatar Pitbull Gaming Computer. I have a blank ssd and i have the WIM file and WINPE on a flash drive trying to install from the flash drive. When I boot to the flash drive i get a black screen that says operating system loading??? There is no operating system so im at a loss.
I installed windows 8 pro and here are the issues I am having.
Every time I install (Pro Disk) when it finishes and restats, it goes right back to the beginning of the install Once I can get it installed, once the first screen spins, it stays black, but if I sleep and wake it, it goes right to the sign in screen-weird.
Then, it says no updates have been searched or ever installed, when I search I get the Error Code 80248007 cannot update.
We got a nice Samsung Series 5 Ultrabook and all it needed was a hard drive. Now.. here's the problem.. I'm good with a screwdriver or a soldering iron but software isn't my strong point.
It's a genuine Windows 8 machine and as I understand it, it will have the genuine COA embedded in the bios right? Now I've tried installing Windows 8.0 64bit OEM which I believe is the correct uk ISO, and I've tried the Pro version also but with both, neither seem to pick up the embedded COA and therefor do not activate.
Am I correct in thinking that it might be because I have to use CSM mode in the bios to get it to recognise my installation media? If I had a UEFI version would it make any difference?
When first I tried to install a fresh copy of windows 8, I deleted all the partitions including systems reserved etc
Now It shows 2 drives where both of the drives are now currently unallocated and are ready to create fresh partition:
Drive 0 - 500GB HDD <== This is where I want to install my windows Drive 1 - 20GB SSD <== This is where the system is creating the system partition
When ever I create the partition in either drives the windows create the system partition (350MB) in ssd automatically. and when I install my windows on 500 HDD then windows wont work because the systems files are on other drive. Furthermore, I dont want to install my windows on ssd because of the limited space. So How can I install my windows in 500GB HDD so it creates the system partition also in the same drive i.e. drive 0 - 500GB HDD
NOTE: I have tried everything using diskpart and making the drive 0 active but still its not working. I dont want to send it to Samsung warranty because they are charging me like $100
I have a Surface Pro 64GB, 64GB SDXC, and a 32GB USB 3.0 Flash Drive. I wiped out the recovery partition a long time ago. I have downloaded Windows 8.1 Enterprise using my MSDN subscription. How do I install Windows 8.1 using the ISO and the 32GB flash drive? I have run Rufus but the flash drive does not appear in the Device area. The ISO is on the SDXC drive and when I double click the ISO or try to mount it I get an error that says it cannot mount the file. My question is, how do I install Windows 8.1?
How am I suppose to install windows 8 on a new motherboard if all there is are the upgrade versions of the disc? I have vista on my old motherboard but that doesn't seem to be working any more. When trying to install it i get an error reading The computer started using he Windows installation media. Remove the installation media and restart your computer so that windows starts normally. then, insert the install media and restart the upgrade.
How windows 8 works now without the sticker key on new laptops. I've searched all over the internet and all I can find are dumb articles telling users to use the manufacturers recovery image. How to do a CLEAN install of Windows 8.
My new windows 8 has NO sticker key on the bottom so my understanding is that it's stored on the bios? Is this correct? So my question is, is if I get an ISO of windows 8 and install it, will it automatically recognize the key or is the key only set up to be recognized by the PC manufacturers crapware filled image?
ALSO, if thats the case, can I use a 3rd party product to pull my key and then use that with the clean ISO? Lastly, where can I download a clean ISO of windows 8? I know you can download official windows 7 ISO's, but i cannot seem to find an official windows 8 iso. I have no desire to download a torrent or from some shady website, I just want an official ISO.
Although I already have Windows 8.1 installed on my computer, why does a message crop up every now and again when I am on the internet telling me that I have Windows 8 and I need to go to the Microsoft Store to download Windows 8.1?
