Rc 64 Bit Driver For Cdma Modem
I'm using a cdma modem and I downloaded the vista drivers but Window 7 said it didn't install the device. I changed the modem to a storage device and it was found and useable but when changed back to a modem it would not work. The driver I was using was 4.40.7...
View Replies (Posted: Sunday, June 28, 2009 3:02 AM)
Sponsored Links:
Related Forum Messages for Windows 7:
ZTE MG880 (CDMA Modem) Usb Issue
i have a problem on my windows vista ultimate 32 bit, when i connecting my ZTE MG880 (CDMA Modem) on my laptop especially at starting modem application, suddenly the sound becomes dead ... I use Compaq CQ40 322 TU... And what the problem ?
Posted: 2 Weeks Ago
View 6 Replies!
View Related
Verizon Phone, USB Connection Fails - LGE CDMA Device
I have a Verizon LG Phone, ENv2. I purchased the USB Cable and software for the phone so I could copy music and photos from my PC to the phone. Under Vista, when I plugged the phone in, the phone appear in Windows Explorer. Pretty simply. Under Windows 7, It does not appear in Windows Explorer. When looking the the Device Manager, the phone appears under Modems (LGE CDMA USB Modem), Ports (LGE CDMA USB Serial Port COM4) and USB Controllers (LGE CDMA Composite USB Device). It does not appear under Disk Drives, not sure if it should. Fash Drives appear there when I plug them in. When I plug the phone in, the synch screen comes up on the phone and they says Connect Failure. I have tried removing the device drivers and reinstalling from scratch. No success. Any other ideas?
Posted: Sunday, March 15, 2009 3:56 PM
View 4 Replies!
View Related
RC ADSL Modem Driver
I installed the windows 7 RC with great enthusiasm but found that the driver for my speedtouch 330 adsl modem which was working fine for beta not working the problem being the setting option for world cannot be selected. Bad experience from windows7 indeed!
Posted: 05-06-2009
View 0 Replies!
View Related
Conexant V90 Modem Driver
I have a conexant hcf internal v90 modem (i know its old), and no driver was present by default PCIVEN_127A&DEV_1003&SUBSYS_B0BC0E11&REV_01 tried windows update but still failed, i had to install a third party driver (although it was for a different model, apparently in worked) wont windows 7 support old hardware by default such as this in its retail version?
Posted: Friday, May 15, 2009 9:01 AM
View 1 Replies!
View Related
USB ZTE Modem Driver
I have a problem, with a USB modem, the USB ZTE modem, Type MODEM 3G multi-mode, GSM / GPRS / EDGE / WCDMA / HSDPA. This device is not identified by the system. As you plug it in, nothing happens because windows doesn't recognize it at all as a modem. The driver doesnt work. I supose It will need a brand new driver in order to work. So Microsoft windows 7 developers, wake up and begin to work on a solution. This kind of modems are getting more and more used.
Posted: Sunday, May 24, 2009 4:47 AM
View 2 Replies!
View Related
64bit Modem Adsl Driver Problem
i have a HAMLET HDSL640 USB MODEM ADSL and there are only drivers for 32bit that don't work with seven 64bit there are no installation with these drivers, only the drivers that canìt be installed on 64bit there are solution or not?
Posted: 08-02-2009
View 6 Replies!
View Related
Huawei E169 USB 3g Modem Driver
I can't get my Huawei 169 modem to function in Windows 7, I've tried both build 6801 and 6956 -same result As soon as I plug the modem in Windows 7 recognizes it as a usb disk, I can access the disk and launch the on board installer. I've downloaded the latest driver from the Huawei site, but the installer fails with the error "can't find any modem" If I do a hardware scan in the device manager only the usb disk turns up, but not the modem. I'm using this modem on this laptop in both WinXP and OSX without any problems, so the modem and PC is allright... Is there any special windows 7 services that I need to start?
Posted: 12-13-2008
View 9 Replies!
View Related
Installing Huawei Modem Driver Of PTCL V Wireless On Wi
Installing Huawei modem Driver of PTCL V Wireless on windows 7. In this article you will find how to install huawei modem (ETS2558) drivers of previous version windows (XP) on windows 7. Other user (other modem brand) of PTCL V or windows XP service pack 3 and vista user may get help from there to install their drivers. As we know that win 7 has great support for previous windows applications so software make no problem only driver create a problem. To install the driver follow these steps. 1- Insert CD into CD/ DVD ROM. 2- Cancel auto run of huawei application. 3- Go to start Menu in search bar type "Troubleshooting" and open it from menu. 4- Now click on programs and follow the instruction (Run application in Win XP service pack 2 compatibility mode and follow procedure same as XP). Select not listed…. Select Location of application…. Click on "Try recommended settings" Now click on start the Program… 5-After installizations save compatibility settings. (Windows may warn u that it is not compatible just ignore it). 6-Now go to the Device manager here you will see TUSB3410 DEVICE IN Multiport serial adapters which will be marked with some sign Right click on it and then click on update driver. Now click on brows files from computer and select CD/ DVD ROM in which driver is found. It will scan the CD/ DVD ROM n find and install drivers automatically. 7-Refresh the list of device manager or re-open it. U will see that USB-Serial Port (COM 3) in Ports (COM & LPT) will be marked with sign. Now perform same procedure as in step 6 with it. Now you are ready to use your application. Now open application ptcl v and click on connect it may take 1 to 2 minutes by displaying a message initializing.
Posted: 12-05-2009
View 0 Replies!
View Related
Agere Systems HDA Modem X64 Driver
My laptop is BenQ Joybook S57 that came with x86 driver cd. I tried to install x64 Win-7 but the only driver I can't find is the modem. I found agere driver for the other brands of notebook PC but no BenQ. I triend to install the other brands driver with no success. Anyone know how to find a generic x64 driver package? or any driver package that will work with my laptop.
Posted: 07-13-2009
View 2 Replies!
View Related
USB Modem Driver USBSER.SYS Does Not Install
The company I work for has a product with a USB Device port implementing the CDC class. Our driver is based on Microsoft's USBSER.SYS driver and we provide the specific INF files so that our product installs as a virtual COM port or as a Modem. It works well on Windows XP, Vista and Windows 7 Enterprise 32-bit versions but I fail to install the same driver for the Windows 7 64-bit Enterprise trial version. The error message is: Windows was unable to install your unknown device. Windows could not find driver software for your device. If you know the manufacturer of your device, you can visit its website and check the support section for driver software. Does anyone have any insight on the possible reason for failure and how we can fix our driver?
Posted: Wednesday, October 28, 2009 9:38 PM
View 5 Replies!
View Related
Cdu-680 Franklin Usb Modem Driver
I have a cdu-680 franklyn usb modem windows 7 refuse install the drivers in normal mode , i need press f8 and select unsigned driver mode. I write to franklyn support for a signed driver, but i no receive answer at this time. How i can disable the protection without need to press f8 when boot up?
Posted: Tuesday, February 24, 2009 7:48 PM
View 5 Replies!
View Related
Modem Driver Problem / Samsung Rant (M540) Phone
i just installed Windows 7 64bit. I use a Samsung Rant m540 Cell Phone for my Internet connection. I cant get high speed on my road so its alot better than dial up, anyway ive used it for a few years and now i cant seem to get it installed. It works fine on other comps and i had a driver for win xp 64bit that works. I got it installed on the windows 7 and it shows up as the modem and says its working properly but it wont respond when i try to query the modem or connect to the Internet. Im pretty sure i just need a driver for the windows 7 for the phone as modem. But Sprint does not have a driver or program which supports it and neither does Samsung which created the phone. I googled for at least 5 hours with no success ive tried a few different drivers and no luck.
Posted: 02-22-2010 at 08:07:33 AM
View 9 Replies!
View Related
Driver For Internal WWAN Modem On Sony Vaio VGN-P19VN/Q
I suspect the answer to this question is 'wait for the launch date' but thought I'd try anyway. I have a Sony Vaio VGN-P19VN/Q - the little one with the Intel Atom processor and built-in 'everywair' wireless adaptor. Performance has always been a little 'iffy' with Vista, so when the RTC beta version of Windows 7 came out, I installed that as an up-grade and was really pleased with the performance improvement. Since then, my employer, a University, has decided to jump straight from XP to 7 and we got hold of the 'Enterprise' version of 7 a little while ago. I installed this on my P-series with great glee, but, unfortunately, was unable to perform an upgrade from the 'ultimate' beta to the 'enterprise' copy, so had to do a clean install. All went well and everything works fine except the 'everywair' modem, which comes up as an 'unknown device' on the system info and I've tried everything (in terms of driver detection software, downloading and installing the vista drivers etc) to get it back up and running. I also have an 02 usb stick modem, which I;ve managed to get to work via a manual set up and a bit of tweaking, and the standard wireless card works fine, so I'm not destitute, just annoyed that one aspect of a very useful little machine doesn;t function anymore. As I said, I suspect the answer is 'wait for Sony to release the driver, you impatient early-adopter' but thought I'd just check! Sony, interestingly, haven't replied to my support query!
Posted: Thursday, October 08, 2009 3:39 PM
View 4 Replies!
View Related
RAID Driver Problem Upgrading Vista 32-bit To 7 32-bit
I am trying to do an in-place upgrade, and I am not able to do so. I am getting conflicting reports from the "Windows 7 Upgrade Advisor Beta" application, and the actual installer. The installer is telling me the following: The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue. For these items, make the following changes: Install updated drivers for the following devices. Open Control Panel and search for "update device drivers". Storage controllers: AMD AHCI Compatible RAID Controller Upgrading Windows will affect the following features: Windows Vista Ultimate Extras have been discontinued and will no longer be available after upgrading to Windows 7. Upgrading Windows will affect the following devices and/or programs: These programs might not work properly after the upgrade. We recommend uninstalling these programs before upgrading. Cancel the upgrade, open Control Panel, and search for "uninstall a program". (Note: Programs marked as * can be safely reinstalled after the upgrade.) ATI CATALYST Install Manager However, the upgrade advisor is giving it a pass: There are some issues you should take a look at before installing Windows 7.
Posted: Sunday, August 16, 2009 8:33 AM
View 2 Replies!
View Related
Driver W7 32 Usable In 64 Bit W7?
I have a Trust gaming mouse and for all the buttons to work I should install a driver. However on the site they provide only a 32bit driver for Windows7 and clearly state that a 64bit driver will never be available! Would the 32bit driver work with W7 64bit?
Posted: 2 Weeks Ago
View 3 Replies!
View Related
Incompatible Driver In 32 Bit
I have a real dilemma, I have a USB drive bay with a LG DVDram drive in and it works perfectly with my Win7 64 bit home edition. I took to my friend who has the same OS but 32 bit and Windows has blocked the driver for the DVD drive (not the USB device) as being incompatible! what's going on Friends machine is an Acer aspire 9300 with 3Gb memory mines homemade with a gigabyte m/b and 4gb of memory. Â
Posted: Tuesday, November 17, 2009 1:37 PM
View 5 Replies!
View Related
Dynex Wireless G 64 Bit Driver
Does anyone know if thare is a Dynex wirless g driver that works with build 7000 64 bit? The driver on the disk says it doesen't work with 64 bit and the one I downloaded from the link below installs but nothing happens when I try to run it and it says it is running in the processes tab in task manager though. I've tried installing it in compatiblity mode and runing it in compatability mode with no luck. Dynex :: Products For Your Digital Life - Dynex Enhanced Wireless-G USB 2.0 Network Adapter.
Posted: 02-11-2009
View 4 Replies!
View Related
VGP VCC8 64 Bit Driver
I need a driver for my sony vaio FZ31S integrated webcam: VGP VCC8 64 bit driver. I want to update the system to a 64 bit windows 7 but couldn't find any drivers. Any suggestions what I can do?
Posted: 11-13-2009
View 2 Replies!
View Related
Canonscan LIDE 80 64 Bit Driver
does anyone have any leads for getting a driver for my new Windows 7 Home premium 64 bit installation? I was able to find a 32 bit driver here. LiDE 80 Scanner Driver Ver. 7.2.5.0a_xp (Windows 7/Vista32/XP/2000) but there is no mention of a 64 bit driver.
Posted: 11-02-2009
View 2 Replies!
View Related
Can't Install 32 Bit HP Driver
Win 7 64 bit host (RTM) - need to install 32 bit HP 1320 driver as additional driver on the host so a 32 bit XP (SP3) machine can use the printer. So far I have not been able to make this work (when I select additional driver and point to the folder that contains the HP 32 bit drvr, I get an error msg 'Can't find a valid driver, etc')Would appreciate knowing if anyone has successfully done this, and how.
Posted: Wednesday, September 16, 2009 6:35 PM
View 11 Replies!
View Related
Driver 64 Bit For Canoscan 4200f
I have been going crazy trying to get my Canoscan 4200F to work with Win 7 64 bit Home Premium. I downloaded the 64 bit driver from Canon & under "Device Manager" it says that it is working. I try to use "TWAIN" in several photo editing programs & it says " cannot connect to device, Cable may be unplugged". When I select Device in the photo editing software it lists "canoscan 32-32" Some times I get a notice that says "Must use WIA driver", It works great under Win 7 RC-1 32 bit using paint shop pro 6.
Posted: 1 Week Ago
View 3 Replies!
View Related
Joystick Driver For Win7 32 Bit
i have a joystick with 3D movement and vibration effect. on the joystick it is written that it is compatible with win 98/me/2000/xp/vista. i use win 7 32 bit. the joystick is recognized by the win7 and i'm able to run the self test of the joystick. however this joystick doesn't work in any of the games. i have to use mouse and keyboard. do i need to get a driver for win7 or what. kindly guide.
Posted: 02-27-2010 at 05:08:41 AM
View 1 Replies!
View Related
Hp Dx7500 7 64 Bit Audio Driver
can anybody help me out with this? i don't see it on the hp site! Answer:- Did you try the realtek website, see below? Looks like you'll have to accept their terms, but there are several HD drivers for 32 and 64-bit windows OSes. http://www.realtek.com.tw/DOWNLOADS/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false Answer 2:- Check the following link for detail: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3804436&taskId=135&prodTypeId=12454&prodSeriesId=3804435&submit.y=4&submit.x=8&lang=en&cc=us
Posted: 03-06-2010 at 03:12:36 AM
View 2 Replies!
View Related
|
TRACKER
