how to control the size of the window, because now the right hand top corner gets hidden behind the frame and my cursor cannot reach either closing sign or side scroller for moving up and down
View 14 RepliesI tried to download but received a message if I did it would harm my computer. My problem happened when I had a freeze and had to force shut down. When I rebooted my screen came back up about 4 times larger and I can not get it back to normal size. I have tried to reboot, set it back to yesterday. I have checked all the drivers and they are up to date. What do I do now?
View 1 Replies View RelatedWhen I open up the Web from any source, including shortcuts, sometimes it comes up in a reduced size, sometimes in a full size, and I have to click on Maximize / Minimize to get the window to the desirable size. How can I get my Web pages to open up in full or minimized size? Is there any technical steps to set this option?
View 4 Replies View RelatedInstalled 7 yesterday. All went well. This am window would only open to half size. In Vista we could fix this by opening a link by right click and asking the link be opended in a new window and then X it out. It would then recall that size as the default. This does not seem to work in 7. Simply re sizing it up and over is not working.
View 1 Replies View Relatedi have a new nvidia video card that allows me 3 monitors - however the first two are 'spanned' giving me a work area of 3840 x 1080 (which is perfect for my video editing), HOWEVER: when clicking the maximize symbol in the upper right hand corner the application window will spread across both monitors. is it possible, or is there any software, that will allow me to set the size of a maximized window? i also get all windows messages opening in the center of the two screens, very annoying and sometimes hard to read....
View 6 Replies View RelatedI have just got a new laptop with windows 7. Every thing is fine except all programs are working fine and I can see everything on the screen on all programs, except one! That would be a camera program by canon called camrera launcher. The image is so large I cannot get to the bottom to operate the controls. If I change the resolution that messes up every thing else. So I need to fix this screen....
View 6 Replies View RelatedI recently did a clean install of Windows 7. I had run into an issue where certain UI elements would ignore DPI changes. Eventually, text looked like this:
Not exactly ideal. I couldn't find a solution, so I was forced to do reinstall. Instead of using my pre-SP1 disc, I created a slipstream DVD. Despite RT Windows 7 Lite giving me an error at the end of the burning process, Windows installed fine... for the most part. See, the default window size is too wide. Whereas windows typically default at something closer to 4:3, mine are closer to 16:9. It's a minor issue, sure, but I'm worried it's a symptom of a bigger problem.
Thinking something got goofed up during the install, I found and applied a registry edit that resets window properties. After relogging, the issue still persisted. Does SP1 use wider windows by default or is there something else going on?
Something I like and can't seem to get Win 7 to do for me. I open a window for my computer, size it and set it at the upper left of my screen. I open folders in new windows; i.e. open the D: Drive and position it next to the window I opened for my computer. Close both. When I open my computer again it is now in the position where I opened the D: Drive. How do I get specific windows to retain the size and position I set each time I open them rather then simply pick up the size and position of the last window I opened?
View 5 Replies View RelatedInstalled Virtual PC with WindowsXPMode. Seems to have gone fine but, when I start an application there, it appears in a very small window - too small to really use the application. In WindowsXP if you press Alt-Enter the application goes fullscreen but this doesn't work , neither does dragging the sides or corner.
View 5 Replies View RelatedWhat is the rational (if there actually is any) of not allowing one to save window size & position (other than the last window opened)?
Without using a 3rd party program (which seems to be the norm with Win7) has someone found a way to allow saving resized windows other than the last window opened??
Window Size Too Small When Launching Some Programs.
View 1 Replies View RelatedI'm using Outlook 2010 (MS Office Profesional Plus 2010) under Windows 7Enterprise.When openig attachments (in this case, Word documents) fom e-mail messages in Outlook, the default window size for the attahments is small. Is there some way (registry hack?) to set the default window size for an attachment to an e-mail message?I've tried opening a sample attachment, resizing the window, and closing it by holding down Crtl while clicking on the red "x" at the top right
View 2 Replies View RelatedSo. Running XP.2 (can't run XP.3; it kills Adobe's CS2 apps, which I need). Had a spare partition. Before putting Ubuntu back on it, I figured I'd install the Win7 Ultimate that'd come (unused) with another computer.
(The install was smooth enough. The updates were slower'n snail poo. But after turning almost everything back to the Windows Classic theme, it's almost bearable. Only two of my devices were unrecognized and unsupported, and they're no surprise; the tablet's nearly twenty years old (even the manufacturer doesn't support it) and the scanner's older still.)
Installed copies of my must-have software--Office 2003 (I've had to suffer through Office 2007, and will never ever ever put it on a machine I have to work on), Photoshop and InDesign CS2, Winamp .
I got my first real exposure to User Access Levels when, the first time I ran Word 2003, Win7 wouldn't let me save the new Normal.dot. I later went and copied my much-customized normal.dot from its XP location, so the file's at least there.
But: I run Word on a portrait-oriented monitor. Under XP, Word remembers the window size and position, and it's exactly where I want it, all the time. So far, every time in Win7 I've opened up an existing document, the Word window has instantly shrunk to around 40% of the size it's supposed to be.
I'm curious if this is a cling-on permissions issue with normal.dot under Win7, or a registry setting that simply hasn't gotten made (in XP, Word seemed to take care of remembering where I put and closed it by itself). Did a search, but didn't see any questions that seemed to relate to this, so I'll ask.
(I'm trying to like Windows 7, I really am. I don't much, but I'm trying. I don't mind the thought of getting a new tablet, and I've got another scanner I can use. But I really dislike having to resize my windows every time I open a document--I spend 75% of my time on the PC in Word, just writing.)
And again, I hate, loathe and despise Office 2007 and 2010. I do most emphatically not like the "death by honey and marshmallows" interface that microsoft seems to think is so great.
I do a lot of software development work using Notepad++ and the windows command prompt as my main tools. Everytime I open these applications, I adjust Notepad++ to take up 80% of the screen, and 20% for the command prompt to run the command line app that I'm writing.During my work, sometimes I'll minimize close/resize these windows, but I'l like them to alwasy open at the same locations and sizes not matter where they where when I closed them.
View 3 Replies View RelatedWhenever I play a video file (.wmv, mpg, etc) or audio (.mp3), MP starts out at the last size it "remembered." But when it opens the file and starts playing it, the window gets really small, like a default size and makes it difficult and annoying to re-size it to an appropriate size. Most annoying is MP becomes smaller such that the volume control on it disappears to just being a toggle for mute. Is there any way to change the default size of MP?
View 9 Replies View RelatedHow to Change the Icon Size in a Windows 7 Explorer Window ?
View 0 Replies View RelatedCan some body kindly guide me how to adjust window size as the Top Right corner gets hidden behind frame?
View 2 Replies View Relatedis there any way to position a series of windows on the desktop screen, which will remain there in the size you have set and precise position etc?E.G i have msi afterburner, GPUZ and coretemp which all start up and overlap each other etc,would be great if it was set in its spot upon windows start-up so i wouldn't have to reposition each window every time i start up my p
View 2 Replies View RelatedI can't access my Window Exploer Panel. It crashed few second after being access.
Also Selecting another use causes a similar problem. To select a new user, I use "Window button + L"
Can we change taskbar icons' size to a specific size other than two default windows defined sizes?
View 5 Replies View RelatedWhen I marked a whole folder or a couple of files in Windows Explorer in Windows XP then the sum/total size of all marked files is (was) shown in the status bar in the bottom of the WinExp window.
View 3 Replies View RelatedI am running out of space on my system drive (120GB SSD with < 6GB remaining). It happened in only 12 months. I'd like to know where all that space went, which files are using it. So I'm looking for a way to rank files by size regardless of their folder location, largest-to-smallest, ideally without a full scan of the disk if there are internal indexes that have this info.
View 2 Replies View RelatedI am in the process of formating a second 300 GB disk drive in windows 7 64 and don't know what file allocation size to use.
View 13 Replies View RelatedWhenever I search in Windows 7, I want to have the ability to open found folders in a new window. If I r-click, that option is not there. Is there a way to add this to Windows 7?
Also: When I go to 'open file location', the file's folder opens in the same window - highly annoying. In Vista, it opens in a new window. Anyway to change this behvior in Windows 7 to act like Vista, so the file opens in a new window?
I am running into an issue where I can open a window/program with my mouse however once the window is open I cannot click inside of it. The window becomes inactive. I also have noticed I cannot right click on my desktop to bring up the properties. I can right click on the window in the task bar to close it but not in the window. Since this is happening I am limited to command prompt. I ran sfc /scannow with no errors. I tried with 3 different mice. I booted the computer into safe mode with command prompt and brought up the device manager to show devices not in use, and when the device manager window opened I could click inside it! since I could use the window I uninstalled all mouse drivers, and reinstalled my microsoft wireless usb mouse driver.. while in this safe mode I changed my mouse properties to system default as I read somewhere that can reset things. Next I booted the computer in safe mode (without command prompt) and still the same thing. I was trying to do a restore point as well however my Kaspersky antivirus 2012 is preventing that as i cannot find a way to kill the program through command prompt.
View 5 Replies View RelatedMy C: drive has been displaying a size of around 60 gb with 40 free even though it's a 300 gb drive. I thought the issue would resolve with a clean install, so I did that. Now I have a fresh install and i need to reinstall everything, but the problem isn't fixed. Below are some screen shots of the drive size:Disk Management, showing my C: Drive's full size ^Any suggestions of how I can reclaim this space?? I've tried a few things already to no avail. If you need any more information about my computer to help, let me know. This is pretty annoying, 'cause I want to use that extra space to install Ubuntu.Oh, I just rememberedWhen I look at the drive in Paragon Partition Manager, it shows the full Drive size, but says that the space that is missing from Windows is in use...
View 9 Replies View RelatedWhen I go to Control PanelAll Control Panel ItemsNotification Area Icons dialog then there are a lot of programs which are already uninstalled.
How can I cleanup/delete all these useless entries? How can I delete ONE single entry manually?
Second question: Assume I want to hide icons and notification for mutiple/all entries (here approx 40 items) in ONE STEP.
Third question: How can I save/backup the current notification settings (for later restore) into a file? Are these notifcation settings stored in a certain branch of the Registry (which exactly) ?
I'm Running Windows 7(64bit)Each time I boot into Windows 7 Prem (64) a open window apears requesting my username at the top of the open window to specify a a program to open it?I've clicked on note pad and I get the following information that apears, each time though it requests, or looks for a program to use to open.
===========================================================================
Interface List
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter
16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
[code]....
I am trying to set my monitor's screen give accurate renditions of my pictures. I use Quick Gamma to set gamma. When doing this I can use either Nvidia's controls or windows controls (right click desktop>Nvidia Control Panel. When using Nvidia's Control Panel, there are two choices: Use other applications control color settings or Use Nvidia settings. Am I correct in assuming that the former setting is Windows? I always check the button to use Nvidia settings (and then Apply>OK), but when I go back to this screen at a later time, the Other applications control color settings is always selected. I'd like to default to Nvidia.
View 3 Replies View RelatedSince upgrading to Windows 7 Home Premium I can no longer use any of the HP Printing software that came with the HP 5280 All In One Printer which I had set up with custom paper sizes to print large panorama photo's,eg 420mm x 210mm.I know the printer is capable of printing photo's this size as I have printed many panoramic photo's in this and similar sizes when I was running XP.I have set some custom sizes in Print Server Properties and the settings are being saved there but they do not appear in any paper size lists in Windows or in the HP printer preferences.This is the procedure I'm following.1) Click start menu,then Control Panel,and finally View Devices And Printers.2) Click printer in the list(HP 5280),then click Print Server Properties.3) Click Create New Form,type a custom paper name in the Form Name text box and enter the desired paper size under Paper Size.Click the Save Form button,and the new form is present in the paper list
View 3 Replies View RelatedI am running Windows 7 Ultimate 32bit .I have ticked in Folder Options to open windows in same window but it won't work,the windows are opening in new window!
View 5 Replies View Related