Windows 7 Ultimate Upgrade Fails
As a retail IT professional, I recieved my copy of Windows 7 Ultimate today. I tried twice to install to no avail.  The first time it hung it hung right after the reboot, at 21% expanding files. The second time it went a little farther. Both times (I think, for sure it was the second time)  the message was that it could not write to the registry.  The install cancels and reverts the system back to Vista.
Facts:Compatibility Check Checked OK Current OP System - Windows Vista Ultimate Hardware HP Pavilion dv9000 Processor, AMD Atholon(tm) 64x2 Dual-Core Processor TK-57(Not many programs on a fairly clean install of Vista) IE, MS Office, Photoshop and a few chat programs Signed on as Administrator when starting the install Any help will be greatly appreciated.
View Replies (Posted: Sunday, October 18, 2009 12:15 AM)
Sponsored Links:
Related Forum Messages for Windows 7:
X64 Vista Ultimate To Win 7 Ultimate Upgrade Fails
I addressed all compatibility issues by uninstalling the software that it didn't like and downloaded the 3gig 64bit upgrade ISO. After it ran for a few hours and moved to what appeared to be the final stages - it rebooted. I found the screen hung right after the spinning MS logo displaying "starting windows" (or similar verbage). I gave it some time... moved the mouse, pressed spacebar, unplugged an external drive, and nothing made the silent HDD act up. Left with no other choice I killed it and rebooted. When it got to the same place it paused... but then informed me the upgrade was not successful, previous version of windows being restored, do not restart.Any advice on where to start here?
Posted: Monday, October 26, 2009 7:13 AM
View 5 Replies!
View Related
Unable To Upgrade From Vista 32 Ultimate To Windows 7 Ultimate
When upgrading from windows vista 32 ultimate 2nd edition to windows 7 ultimate upgrade the upgrade proceeds through the transfer of the files and programs with no problems but when the 4th process of the installation is reached namely expanding windows files, at 21% the process stops and apparently requires a restart. When the computer restarts I recieve the message that this computer is being shut down to prevent damage, I presented this problem to the Windows 7 technicians and spent many hours on the phone and was told eventually that the problem was in my hard drive and that I would need outside help to correct this problem as they were not trained in such problems. I have a raid 5 configured hard drive consisting of 4 Seagate Barracuda 500GB for a total of 2 T. I hae used this HD for at least 3 years to run Vista 32 with no problem and am currently back using Vista 32 ultimate. I assembled this computer from components as I have done with 5 other computers.I would appreciate any help that can be given me by the forum and would supply any further information that might be needed such as the components that are in this computer and what I had done before attempting Windows 7 ultimate uograde
Posted: Friday, December 18, 2009 3:56 PM
View 29 Replies!
View Related
Upgrade Vista Ultimate To Windows 7 - OS Language
My Notebook comes from the U.S. with Vista Ultimate. Now I want to upgrade to Windows 7 Ultimate here in Europe. I heard that an in-place upgrade to Windows 7 is only possible within the same language (e.g. EN-US). Now I worry that I'll buy the wrong Win 7 version. I know that my current Vista Ultimate is English, but how to find out which one (could be British as well)? Ist there a native OS language at all besides the language I set in the "regional and language options" in the control panel? And is this important at all? As far as I know Windows 7 Ultimate supports 35 languages, so does it matter at all as long as I accept to install Win 7 in the same language like my Vista is?
Posted: 11-23-2009
View 9 Replies!
View Related
Upgrade To Windows 7 Ultimate (Signature Edition) Not Working
I received the Windows 7 Ultimate Signature Edition from Microsoft 2 days ago. My HP Pavillion DV5 will not upgrade. I am going from Vista to 7. It gets all the way to the 60% into the last step ( after 5 hours) and then does a restart and says the upgrade did not work and spends another hour undoing the changes. I have attempted 3 upgrades three different ways. I have done it with the recomended updates, without the recomended updates, and after uninstalling all the programs that will not work with Windows 7. I used the update manager and it says that it should work. I am going to try again tonight. This time I am going to move all my documents to my external and then try. I have about 40GB worth of work. I am a Ph.D. and I have thousands of dollars worth of statistical programs that are a pain to get as I have to put requests into my department. Thus I want to do an upgrade and not a clean install. I only have about 30GB free on my drive so I have no room to partition.
Posted: Friday, October 09, 2009 7:25 PM
View 7 Replies!
View Related
Upgrade To Windows 7 RTM From Vista X64 Ultimate Stuck
Just wanted to state that I encountered the "stuck" issue as well, but on my machine it was stuck at 32% for hours on a machine with over 1 million files. I powered down my machine and it restarted in Vista with no problem, although there were three new folders obviously created during the upgrade to hold installation files. I've deleted those folders.I was unable to find a log file that might indicate the file(s) which were causing the "stuck" condition. NOTE TO MICROSOFT: It would be GREAT if you could provide more on-screen feedback about what specific file or setting is being migrated, and some onscreen indication of the location of a log file (if it exists) where one could go to find out how far the process went. You display every file as it is installed in Visual Studio. Why be so obscure during the upgrade process in Windows 7?In my case, I've been testing Win7RC in a separate partition via dual-booting. I zapped that partition and did a clean install of Windows 7 RTM, which went off without issue. I've been re-installed my programs (a pain, but I'll only put on what I need). In the meantime, I've still got my Vista partition to boot up in if I need anything there.
Posted: Monday, August 10, 2009 10:40 AM
View 2 Replies!
View Related
Windows Vista Ultimate Cannot Be Upgraded To Windows 7 Ultimate
I'm getting this message when I try to upgrade.Windows Vistaâ„¢ Ultimate cannot be upgraded to Windows 7 Ultimate. You can choose to install a new copy of Windows 7 Ultimate instead, but this is different from an upgrade, and does not keep your files, settings, and programs. You’ll need to reinstall any programs using the original installation discs or files. To save your files before installing Windows, back them up to an external location such as a CD, DVD, or external hard drive. To install a new copy of Windows 7 Ultimate, click the Back button in the upper left-hand corner, and select “Custom (advanced)”. Both are 32bit retail versions.  Upgrade advisor passes. Am I missing something obvious?
Posted: Thursday, October 22, 2009 5:29 PM
View 15 Replies!
View Related
Vista Ultimate To Win7 Ultimate RTM Upgrade: Incompatible App Removal Error
Disk copy of Vista Ultimate used for upgrade attempt. First upgrade attempt identified several issues with apps needing to be uninstalled. First removed Trend Micro Internet Security 2008, but deferred reboot to complete, until rest of problem apps were uninstalled. After reboot, restarted upgrade install with check compatability online test (Win7 Upgrade Advistor Beta) - no problems found. Then, "install now" option taken: completed temp file copy, setup started, accepted option for "go online for latest updates...", accepted license terms, then, very quickly received the following "Check Compatability" errors: Windows needs to be restarted so necessary changes to system files can be made before continuing. For these items, make the following changes: Uninstall these programs. Open Control Panel and search for "uninstall a program". Trend Micro Internet Security 2008 - Examination of registry and installed programs and features list shows no sign of uninstalled app.
Posted: Wednesday, August 12, 2009 6:41 PM
View 2 Replies!
View Related
Vista Ultimate Upgrade To Win7 Ultimate Failing At Last Reboot
I've attempted to upgrade a machine 3 times as indicated. During the final reboot to Win 7 all appears fine until I get to a screen stating that the upgrade failed and the previous version will be restored. The restore works fine. The machine is dual core box with 2GB RAM. The upgrade advisor indicates no problems bar the fact that Ultimate Extras will no longer be available. I'm running setup from the d: drive (rather than CDROM drive). Unfortunately the process gives no indication as to why the upgrade has failed. Where can I find upgrade logs and what should I look for?
Posted: Thursday, August 20, 2009 1:45 PM
View 3 Replies!
View Related
Stardock Preventing Upgrade From VISTA Ultimate To Win 7 Ultimate
Doing an upgrade from VISTA Ultimate to Windows 7 Ultimate. Got error that it could not upgrade because Window Blinds 6.0 or earlier was installed. I uninstalled Window Blinds via the STardock user interface and still get the error messages. Cleaned out the registry of any Stardock or Window Blinds reference. Removed any traces of both programs from the drive. Still get the error message and it won't upgrade. Any ideas? I've check Stardock support with no luck.
Posted: Thursday, September 24, 2009 6:10 PM
View 6 Replies!
View Related
BSOD During Upgrade From Vista Ultimate To Win 7 Ultimate
I've tried to upgrade from Vista Ultimate 32 bit to 7 Ultimate 32 bit numerous times now, all with the same result: a BSOD during the install process, which I get during (what I think is) the final step called "Transferring files, settings and programs." The installation compatibility test warns me about my Nvidia drivers, which I've attempted to both remove and upgrade to the latest version, but that doesn't seem to make a difference (I still get the warning during the compatibility check, and I still get the blue screen). I'm not sure that's even the problem, either. I can't (easily) remove/replace the video card, since my mobo doesn't have onboard video, so I'd hopefully be able to avoid having to do that. The error in the blue screen is a nebulous "REFERENCE_BY_POINTER" message. The technical information is "STOP: 0x00000018 (0x00000000, 0x86478030, 0x00000002, 0xFFFFFFFF)." As a zip file, I've attached the setup log, error log, compatibility report, and what I think is the setup dump file, all of which I found in C:$WINDOWS.~BTSourcesPanther (I believe that's the right place to look). The logs complain about BthMig problems, which I think has something to do with bluetooth, but I don't have any bluetooth peripherals. I've uninstalled things that I thought might have some bluetooth things in it, like MS Intellitype (maybe a stretch), but again, no difference. System specs: AMD Athlon 64 X2 6000+, on an Asus M2N SLI Deluxe, with 4 GB of ram, and an Nvidia GeForce 8800 GT. The hard drive I'm installing (upgrading) on has about 100 GB free.
Posted: 10-12-2009
View 1 Replies!
View Related
Upgrade Vista Ultimate - Win 7 Ultimate: OS Language
I heard that an in-place upgrade to Windows 7 is only possible within the same language (e.g. EN-US). Now I worry that I'll buy the wrong Win 7 version.I know that my current Vista Ultimate is English, but how to find out which one (could be British as well)? Ist there a native OS language at all besides the language I set in the "regional and language options" in the control panel?And is this important at all? As far as I know Windows 7 Ultimate supports 35 languages, so does it matter at all as long as I accept to install Win 7 in the same language like my Vista is?Sorry, maybe I'm a bit confused *ggg*.
Posted: Monday, November 23, 2009 4:44 PM
View 3 Replies!
View Related
Issue With Win 7 Ultimate Upgrade From Vista Ultimate
I upgraded one of our test laptops from Windows Vista Ultimate 32 bit to Windows 7 Ultimate 32 bit, I had a couple of issues installing the straight upgrade. The last issue I have is that during the update I was never prompted for a key, now when I go to the Control Panel/System I see that I have 27 days for the windows activation, however when I click on the Activate Windows now or If I click on the change product Key link under the Windows Activation page the O.S does nothing. I do have 3 licensed keys but the system does not even prompt me to enter any key. I also booted in safe mode and was unable to change the key. I've also run repair from the installation CD, does anyone know how to solve this issue or how to change the key in any other way..
Posted: Tuesday, November 10, 2009 12:06 AM
View 18 Replies!
View Related
Win 7 RC Install Over Vista Ultimate SP1 Fails At First Reboot
I've now tried several times to install the Windows 7 RC over Vista Ultimate SP1. Each time, the install fails after it gathers files with a message that says setup was unable to reboot the system. The only choice is to cancel setup and start over. The process begins at the beginning, and it takes forever, and fails at the same point, so I'm giving up unless someone can point me to specific information. My machine is a Dell XPS with 4 GB of RAM and an ATI Catalyst video card; everything is up-to-date in Vista Ultimate.
Posted: Tuesday, May 05, 2009 11:43 PM
View 11 Replies!
View Related
BSOD During Upgrade From Vista Ultimate To 7 Ultimate
I've tried to upgrade from Vista Ultimate 32 bit to 7 Ultimate 32 bit numerous times now, all with the same result: a BSOD during the install process, which I get during (what I think is) the final step called "Transferring files, settings and programs." The installation compatibility test warns me about my Nvidia drivers, which I've attempted to separately remove and upgrade to the latest version, but neither seem to make a difference (I still get the warning during the compatibility check, and I still get the blue screen). I'm not sure that's even the problem, either. I can't (easily) remove/replace the video card, since my mobo doesn't have onboard video, so I'd hopefully be able to avoid having to do that. The error in the blue screen is a nebulous "REFERENCE_BY_POINTER" message. The technical information is "STOP: 0x00000018 (0x00000000, 0x86478030, 0x00000002, 0xFFFFFFFF)." As a zip file, I've attached the setup log, error log, compatibility report, and what I think is the setup dump file, all of which I found in C:$WINDOWS.~BTSourcesPanther (I believe that's the right place to look). The logs complain about BthMig problems, which I think has something to do with bluetooth, but I don't have any bluetooth peripherals. I've uninstalled things that I thought might have some bluetooth things in it, like MS Intellitype (maybe a stretch), but again, no difference. I'm a novice at it, but I attempted to get some information from WinDbg from the setupmem.dmp file. I also tried doing !object 0x86478030 but it responded with this: GetUlongFromAddress: unable to read from 82785714 Could not read ObjectType address My system specs are: AMD Athlon 64 X2 6000+, on an Asus M2N SLI Deluxe, with 4 GB of ram, and an Nvidia GeForce 8800 GT. The hard drive I'm installing (upgrading) on has about 100 GB free.
Posted: Monday, October 12, 2009 7:53 AM
View 13 Replies!
View Related
Win 7 Ultimate Upgrade From Vista Ultimate
I have a Full OEM Windows Vista Ultimate DVD. I would like to know if Vista is being upgraded how can I get a Free upgrade to OEM Windows 7 to replace my Windows Vista Ultimate DVD? Do I have to purchase another full version of Windows 7?
Posted: Thursday, October 01, 2009 2:49 AM
View 6 Replies!
View Related
Trouble Upgrade From Vista Ultimate(32) - 7 Ultimate 32
I'm trying to upgrade a computer from Vista Ultimate (32 bit) to 7 Ultimate (32 bit) and I keep receiving this error message: "This installation disc isn't compatible with your version of Windows. To upgrade, you need the correct installation disc. For more information, check your computer's system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select Custom (advanced)." Now, I double-checked all the system requirements and the system is compatible with 7.
Posted: 10-26-2009
View 9 Replies!
View Related
Upgrade Vista Ultimate To Win7 Ultimate
I'm having problems upgrading from Vista Ultimate SP2 (32bit) to Win 7 Ultimate (32 bit) - so after multiple attempts (and pulling out my hair) I hope someone can point me in right direction. - Updated all device drivers (from Device Manager) - Disable Norton AV and Firewall - Ran Window Upgrade Advisor - all hardware green, devices okay, a couple of apps need upgrade or reinstall after upgrade (ie itunes, roxio back up) - Ran upgrade mode. - Upgrade gets to final step of restoring programs and settings and then re-boots... only to get message that upgrade was not successful and restoring previous Windows version Read more at the forum...
Posted: Tuesday, November 24, 2009 5:15 AM
View 7 Replies!
View Related
Unable To Upgrade Vista X64 Ultimate To Win 7 X64 Ultimate On SATA Drive
I am trying to upgrade from Vista to Win 7 and get the following error: The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue. For these items, make the following changes: Install updated drivers for the following devices. If you already have updated device drivers, click Load Driver if available and follow the instructions. Or, open Control Panel and search for "update device drivers". IDE ATA/ATAPI controllers: Standard Dual Channel PCI IDE Controller I have my SATA drives configured as 1 stand alone for boot C: and the other three in RAID 5 configuration. Win 7 wants an updated driver but I can not locate any as all scans for updated driver come back empty. This is an onboard controller on a MSI P45 Nero3 board.Any assistance would be appreciated.
Posted: Monday, November 16, 2009 10:10 PM
View 6 Replies!
View Related
Vista Ultimate X64 To Win 7 Ultimate X64 In Place Upgrade Issue
I have, twice now, tried to do an in place upgrade from Windows Vista x64 Ultimate to Windows 7 x64 Ultimate. Vista is pretty much fully patched up to date, and Windows 7 is RTM and is choosing the option to download the latest updates for install. Both times it has taken about 11 hours to work through most of the phases of the upgrade, and then apparently hang in the transferring setting stages. It has hung at exactly the same point each time: 458886 of 607131 (for some strange reason, it reports this as 62%). The "hang" is not absolute, which is to say that all the rotation of "please wait..." messages continues, so it's not a totally lockup. That said, I let it be for about 8 hours the first time with no changes, and a whopping 35 hours last time (about 46 hours of total time with the upgrade running) - again without any change. Since there is no option to cancel, I was forced to shut down both times, and the rollback has taken perhaps a half hour. There are, of course, several questions to come out of this, but the primary one is "Where is the log?", and how can I determine what the heck it was working on when it decided to go away. Frankly, the idea that someone would RTM this when I'm hearing that a 5 hour in place upgrade is "fast", and it can take as long as 85 hours seems a bit more than ridiculous, but I'm doing my best to go with the flow.
Posted: Wednesday, September 23, 2009 5:24 AM
View 4 Replies!
View Related
Fail Upgrade To Win7 Ultimate RTM 32 Bit From Vista Ultimate 32 Bit
I just tried the upgrade from Vista 32bit Ultimate to Windows 7 32 Ultimate. Several issues occurred. First the install uses an incorrect version of jraid.sys (I suspect it may be a 64 bit version from what I have read on various posts). After copying the files the system reboots and fails as the jraid.sys file is corrupt or wrong version. I booted the Vista load and copied the Vista version of jraid.sys from windowssystem32drivers to $Windows.~BTwindowssystem32drivers and the system reboots Windows 7 and continues the install process. As it gets to the final stage, I get a message that the upgrade has failed (with no other info) and a rollback to Vista occurs. the $Windows.~BTsources ollback folder has a setupact.log file that details the roll back but the setuperr.log file is empty. Any suggestions?
Posted: Tuesday, September 01, 2009 2:13 PM
View 8 Replies!
View Related
Unable To Upgrade Vista Ultimate X64 To Win 7 Ultimate X64
I tried to upgrade from Vista Ultimate x64 to Windows 7 Ultimate x64. This is supposed to be a supported path for an in-place upgrade. When choosing Upgrade from Setup I get the following message: Windows Vistaâ„¢ Ultimate cannot be upgraded to Windows 7 Ultimate. You can choose to install a new copy of Windows 7 Ultimate instead, but this is different from an upgrade, and does not keep your files, settings, and programs. You'll need to reinstall any programs using the original installation discs or files. To save your files before installing Windows, back them up to an external location such as a CD, DVD, or external hard drive. To install a new copy of Windows 7 Ultimate, click the Back button in the upper left-hand corner, and select “Custom (advanced)”. I have run the Windows 7 Upgrade Advisor and uninstalled any application or driver that reported problems. The only application left with a warning is Visual Studio 2008. Everything else is reported as compatible (green check mark). In fact, the Upgrade Advisor indicates that an in-place upgrade is available as an option. I haven't been able to find anyone else with this issue and there is nothing else pointing me in the right direction to resolve this. Has anyone seen this before and/or found a work-around.
Posted: Tuesday, August 11, 2009 8:12 PM
View 7 Replies!
View Related
Upgrade From Vista Ultimate DANISH To Win 7 Ultimate Danish
I am a bit confused about "We would like to inform you that the upgrade should be done without a problem. Windows 7 ultimate supports Danish aswell we do not have Danish version." When I try to do the upgrade, I get this message : "You can't do a typical upgrade using an installation disc that's different from the language installed on your computer. Go online to see how to install Windows 7 and keep your files and settings. " The upgrade then stops.Ultimate supports Danish as well but there is not Danish version. How can I upgrade from vista ultimate DANISH to W7 ult. english and change language to danish after upgrading ??
Posted: Friday, January 15, 2010 12:11 PM
View 2 Replies!
View Related
Use Win 7 Ultimate Upgrade Version DVD To Upgrade WinXP Professional X64 Computer
Can I use Windows 7 Ultimate Upgrade version DVDs to upgrade my Windows XP Professional x64 computers?WindowsMarketplace.com says:Microsoft designed Windows 7 Upgrade media for Windows Vista. Customers with Windows XP can purchase Windows 7 Upgrade versions but must back up their files, clean install, and then reinstall their applications. So if I have to back up my files, clean install, and then reinstall my applications, then what's different from a full install?And what are the differences between Windows 7 Ultimate Upgrade versions and Windows 7 Ultimate Full versions then?
Posted: Tuesday, September 22, 2009 10:03 AM
View 5 Replies!
View Related
Upgrade Fails At 66%
I want to test out W7 so badly but I can't get the install to get past 66% in it's final phase. I am upgrading from Vista Ultimate 64bit and I do have a 9800GTX - Once it hits 66% an error box pops up and my Vista gets rolled back. So the good news is the rollback feature is working like I charm! I've done 8 failed installs over the last few weeks and it rolls back perfectly. Things I Have Done: 1: Searched every service of the Internet for a solution. Haven't found a solid one yet. 2: Downloaded and burned (at the slowest speed) a freshly downloaded RC to see if maybe the first one I got was bad. 3: Took out my 9800GTX, uninstalled the drivers, used on-board video to try and finish the install. 4: Tried the new beta drivers from NViDIA currently on their site. Every single attempt the Upgrade fails in the exact same way. Now I have seen alot of suggestions of work around. Well not a lot actually, or else I wouldn't be posting here. Most of them were some crazy things that I had no clue what they were talking about. So I am coming to you genious computer gurus over here at the MS TechNet forums for hopefully a solution - From what I read there are an over-abundance of people that are having this issue and therefore cannot experience W7. In plain English (read: I'm not a computer guru by any means, so I can't translate some of the more advanced computer lingo) is there a way to finally install W7 on my machine?
Posted: Thursday, June 11, 2009 4:02 AM
View 4 Replies!
View Related
Using Windows 7 RC Backup Fails
I try to use the backup as Windows 7 RC (Build 7100) asks but the backup fails. I have the backup set to copy onto my G: drive and when the backup tries to run I get the Floppy Drive clucking away and then the failure (unsuccessful) message. Floppy is shown as A: as you might expect when I check with Windows Explorer. I ran a check on the G: drive and all was OK.
Posted: Wednesday, August 05, 2009 9:51 PM
View 3 Replies!
View Related
Upgrade Fails During Migration
I've tried four times, on a standard x200t, from windows vista business, with windows 7 upgrade advisor all green.But each time it will rollback when the migration reaches 63% (or 66% sometimes). All the setuperr.log are all the same, like this:2009-11-03 00:51:52, Error Number of Enumerated Devices = 15[gle=0x00000103]2009-11-03 00:51:53, Error Failed to find driver file path. Error code is [0x1]2009-11-03 03:37:47, Warning UI Progress text [Transferring files, settings, and programs (467530 of 618125 transferred)] does no fit in the Window. Error code is [0x1]I've tried all the suggestions I could find, no help. Removed all fishy applications, no help.Any one knows how to get windows 7 upgrade done?UPDATE: my laptop's keyboard and the red point are not usable after the lastest rollback.
Posted: Monday, November 02, 2009 8:21 PM
View 25 Replies!
View Related
|
TRACKER
