Windows 7 Home Premium Installation On New ASROCK 330?
Dec 13, 2010
I am having problems installing WIN7 home premium on a new ASROCK ION 330 HT PC . It goes well up to completing the installation, when I think it is trying to restart the PC and all I get is a blank screen. After powering off and starting again, I get the windows shut down completed unsuccessfully message. I start windows normally. The Windows load goes as af as the logo after which I get another blank screen. Can anyone shed any light before I send it back? I have done a memory check which was OK and I have rest the BIOS to factory settings.
I bought Windows 7 Home Premium from a Retail store. I got two disks in it. One is of 32 bit version and one is of 64 bit version. Can i install only one of them or I can install only one
I am trying to run a Windows 7 Repair installation and the install is stopping because I have a more recent version of Windows than what is on my DVD. Which is true. I am running Window 7 SP1 and the DVD is just Windows 7.
I am following the tutorial here: Repair Install
I basically chose an "upgrade" vs "custom" when I was asked about the type of upgrade that I wanted to run. The installation proceeded and then stopped and stated that I had a more current version of Windows than what I was trying to install.
I was wondering how to put win 7 back on laptop with new hard drive since old one failed and no backup. Is there an image I can use and then reuse the original win 7 key on laptop sticker?
My computer's HDD had died and all data was lost. I gave for fix but windows ultimate was installed instead of home premium and I want to downgrade because its not genuine and I don't have windows installation CD. Is there any possible way of downgrading without clean install and CD?
I had an old HP laptop running Vista and the the video died but, the hard disk was still good. The computer itself was not worth repairing. I replaced it with a new Dell XPS running Windows 7. I took the old hard disk and installed it into an external USB enclosure. I can plug it into the new computer and transfer the data easily.But what about the applications, application data, user settings, etc.
So I'm trying to install Windows 7 on my notebook through a USB boot but I keep getting the Setup was unable to create a new system partition or locate an existing system partition. error no matter what I try. My notebook has no CD/DVD drive so I've been using a USB flash drive boot which I created using bootcamp on my macbook pro.
Here is are screenshots of where I'm stuck, disk part and details of disk 0 (HDD):
My notebook has no OS now so I'd really like to get this fixed!
When I try to install some software (.msi) I get the message - "The system administrator has set policies to prevent this installation" People have found fixes by changing local security policy settings or changing the UAC settings, but none of these work for Windows 7 Home Premium 64 bit.
while installing 7 H.P. it gets to completing installation then freezes up after computer reboots a warning message appears stating windows 7 has failed to install and resume after reboot, and then the same warning message appears.
I tried the roll back installation option and a message flashes on and off to quickly to read. and Vista will not come up to start over.
I successfully bought the upgrade version of Windows 7 Home Premium N, downloaded and extracted it and now I want to install it.
When I choose UPDATE in the intallation dialog it tells me that I cannot upgrade from Vista Home Premium to Windows 7 Home Premium ???
Every website from Windows and other people tells me that it IS possible and even the Windows 7 Update Advisor told me that I should not encounter any problems upgrading.
Has anyone of you yet encountered upgrading problems of compatible Vista/7 versions?
Or any other idea what I can do to solve the problem?!
I know that I can make a clean intall of 7, but this would be a pain..
Yesterday I was messing around on my brand-new laptop, and I was stupid enough to try a keygen to get Ultimate (I had HP). Surprising. It worked but the copy wasn't genuine obviously. So then I rebooted, pressed F8 at boot. An ran Toshibas recovery to try to get the computer to its out of box state. I got stuck at initializomg (either that or I was impaptient) so I turned off the laptop. Then when I truer to boot I got bootmgr is missing. I have an old vista Hp disk so I installed that for the time being. So my question is, how do I get it back to the original state? I do t have any important data or anything.
Recently ive decided that Well i should upgrade this computer. give it a bit of ..well style.But since ive upgraded to Windows 7 there has been no sound whatsoever. Ive downloaded countless driver programs which tell you what sound card you have and not one has detected it. IVE ALSO downloaded drivers for the Windows 7 version of my sound (Realtek AC97) and ran windows updates and NONE worked. ive ran the troubleshooter on the sound thing...STILL not detecting any sound card. i tried changing the audio in BIOS from auto - enabled....nothing.
I bought a notebook preinstalled Windows 7 Home Premium 64 bit, of course, licensed.But I found it incompatible with some software. So I decided to use 32 bit.I want to format the whole drive and install 32 bit version of W7HP.
The original OS was Windows XP 32bit SP3. I upgraded this system to Windows Vista Home Premium 32bit SP2 with no issues.
I then went to upgrade the system to Windows 7 Premium. I chose the "Upgrade" install and not the "Clean" install. I've checked the updater to confirm that all my system information was adequate. I uninstalled the ATI Catalyst Controller, iTunes, etc. that it wanted me to. Oddly enough, the ATI Catalyst Controller was the most recent driver that supports Windows 7.
I checked online to see if the hardware was all supported by Windows 7. The Sapphire Vapor-X video card was not compatible or compatible... it simply wasn't on the list of either. The X-Fi Extreme Gamer said it was NOT compatible... yet, I had a driver for Windows 7 and the Windows 7 Application checker said that my sound card was ready for Windows 7... thus a discrepency.
I went on with the installation. I get to the last step where it resets the computer at 62% and I get a BSOD for about 1/3 of a second. It goes by too quickly for me to capture it. It then restarts the computer instantly with the result of "Upgrade was not completed successfully. Restoring prior OS yadda yadda". I've gone through this about 5 times now trying different things.. keeping the Catalyst controller installed, uninstalling the video card, removing the sound card, etc. Nothing seems to work.
It was recommended to me that I do a clean install... however, I have read that many others have done a clean install and theirs STILL doesn't get past the 62%.
Is it my hardware? Do I need to buy MORE hardware now that 7 is out that is on the compatible list?
I'm french and i already owns Seven Home Premium N (Full french DVD version with a key).I recently bought Seven Home Premium on Amazon UK (Full non N version, the E uropeen version). This version is entirely in English.As you can see, my english is not so good to have a full non-french system. I would like to use my own french Home Premium N to install my Premium english key.Anyone know if it it possible to enter a Premium key with a Premium N DVD ?
i already owns Seven Home Premium N (Full french DVD version with a key).I recently bought Seven Home Premium on Amazon UK (Full non N version, the E uropeen version). This version is entirely in English.As you can see, my english is not so good to have a full non-french system. I would like to use my own french Home Premium N to install my Premium english key.
I have sort of a special case here. I purchased my HP laptop in Thailand, and much to my chagrin it came installed with Windows 7 Home Basic. In addition, the HP store which sold me the laptop installed 4gb of RAM neglecting to tell me that the 32bit version of 7 only supported up to 3. At any rate, I am hoping to upgrade to Windows 7 Home Premium, 64 Bit edition.But while there is a glut of information online about how to upgrade from Starter, there is little to nothing about Home Basic. Do I have to buy a full copy of 7 Home Premium 64 Bit? Can I buy an Anytime Upgrade that is meant for Starter and apply it to my computer?
Had Windows 7 home premium for around 2 months on a brand new desktop. Never had a single problem with it untill today. Turned it on as normal, got to the log in screen where i click on the required user. As the pc is only used by me I only have 1 user availiable. I click on it like normal but this time i get a message saying 'The user profile service service failed the logon' 'user profile cannot be loaded'. It then refreshes the page and returns me back to the logon page and if i press enter the same thing just keeps repeating itself. Other option on this page are the shutdown/sleep/restart option and a little box in the bottom left corner called ease of access with various options, but none that seem relevant to the situation.
I came to my laptop about five hours ago and have not been able to do anything with it since. I had it in hibernate and as I flicked the lid up it shut itself down - I assumed for updates. Nothing happened.I turned it on, started windows normally as it hadn't shut down properly and waited for the log on screen. It hung on "Please wait" for about five minutes with the circle going round and round and round, then nothing, just the home page no user no password no log on. I turned it off and turned it on again while Google'ing for answers. Seeing as I haven't been able to log in at all a lot of the answers I haven't been able to try, so far I have tried: to boot normally and end up with the hanging screen.booting safe mode, it loads files, finishes with windowssystem32DRIVERSCLASSPNP.SYS then restarts and I'm back to square one.booting in safe mode with networking and command prompt - same as above. F8, repair, system restore, tried all points with errors:System restore failed to extract the file (C:) from the restore point. An unspecified error occurred during system restore (0x8000ffff) [code]I downloaded Windows 7 about 18 months ago from a student offer while I was at university - I was sent a CD/DVD and put it somewhere very safe, so safe I don't even know where it is!If it is any help, I also hear a ticking noise from the laptop when it gets to the start up screen just as it begins to hang, it then stops and I end up having to turn it off or it restarts itself.
hey i have windows 7 home premium 32-bit, i also have 4GB RAM but only (2.93 GB usable). i have intel chipset 4 graphics .... what i would like to know is why my computer is not using all my RAM an can i use 1GB of my RAM as Video ram for games?
I recently uprgaded my Vista x64 PC to Windows 7 x64 Home Premium. I now want to upgrade to the professional version. I have all legal copies of both. When I upgrade to the pro version, can I then use the Win 7 Home Premium upgrade (with that FPP) on another device (laptop), since the pro upgrade will have it's own FPP?
Does Windows 7 Home Premium only support 64 bit? corychuga123 has chosen the best answer to his/her question.Click here to view the answer that was selected.
My Computer properties tell me that I have 16gb installed, but it says that only 7.96gb is useable. How do I get it to use the rest? I am running Windows 7 Home Premium x64, so I should be able to max it out at 16gb.
I bought and downloaded about a year ago, Windows 7 Anytime Upgrade to install the new OS on a computer that was bought with a Vista system already installed. Now I have some problems with the computer and I'd like to perform a clean reinstallation of Windows 7.Is it possible to do so even if I only bought the Home Premium Upgrade version?Do I absolutely need the Home Premium Full version?I was thinking of downloading ISO images from the Microsoft Store and burning them to a DVD. Will that work if I only bought the Home Premium Upgrade version?
Yesterday's evening I was watching a movie on my Asus P52J lap top and then I decided it's time to sleep so I went to brush my teeth (I left the computer running) but when I came back lap top's screen was black and it said "disk read error press ctrl+alt+delete to reboot" (or something similar) when I rebooted the same screen popped up so I just pushed the power button to power off. Then I removed battery and put it back in (in the past it worked for other crashes). When I started my pc that window came up with two suggestions to run windows normally or to fix it.
I tried to start it normally but on the windows animation screen the "windows" didn't show up and it automatically started system recovery... It took forever to load it. But when I got to the system recovery tools I saw that it says "Operating system: Unknown on (Unknown) local disk" . It really startled me. I decided to go with Startup repair. At first it was scanning for errors and then it said that it was fixing them. But it keeps on fixing them for hours. I don't know what to do... I don't have the windows 7 home premium x64 original disk because I got the computer with already installed windows.
Sercurity update for Microsoft visual C++ 2010 Service Pack 1 Redustributable Package KB2565063. this wants to update each and everytime I shut down my computer, I have checked to see if it has updated successfully - yes it has. It does this each and every day. How do I stop it (that's if I should)
My pc every now and then just likes to freeze or just crash completely so I have to reboot it several times. After a long process of rebooting it still doesn't fix the problem. It's very slow for a high spec pc, I can't seem to do simple things such as working on word or PowerPoint.
