I bought a new sony vaio cb series, black. It takes a long time to open the my computer link as if its loading/searching something. This happens only the initial time after computer is switched on and not happening after hibernation. Not many program has been installed to the machine....
View 2 Replies
My Toshiba laptop is taking long time when startup.
View 1 Replies View RelatedI am noticing that Outlook is very slow to open emails with background images which are placed into the body tag of a message. Usually when I create an email marketing campaign I give my email message a background picture by placing markup similar to the following into the body tag;<body style="background-image: url('http://myserver/somepicture.jpg');>Traditionally this has been fine, however over the last day I have noticed that Outlook takes a very long time to open these kinds of messages. I have had a look through my old email campaigns, and much to my surprise I have found messages which opened fine six months ago taking a long time to open.This issue is happening on more than just my computer, as I have asked staff & customers about their Outlook experience, and some have even reported a complete crash of Outlook.I am using Outlook 2010, however I think that Outlook 2007 is also being affected.
View 4 Replies View RelatedWhy my laptop take more time too start when i switch it on. Sometime window repair error on screen display.
View 5 Replies View RelatedWhy is this. Like 10 minutes plus and it still says recycling. It should only take a second. Is it bad to let it continue at its own pace or should I restart the PC and try it again?
View 1 Replies View RelatedI have an HP Z800 Workstation with Windows 7 Pro 64 bit. When I start the computer it seems to be ready in somewhere under a minute after the desktop comes on, meaning there are no spinning circles the mouse moves smoothly etc. However if I try to launch one of the programs in the taskbar, Firefox, Thunderbird, it takes at least seven to ten minutes for the program to come on and be ready. At this point if I click Start>All Programs it is completely empty with no icons or folders at all in there and will be for about the same amount of time. The Start menu freezes open like that and all I can do is to wait. And wait I do because it makes it much worse if I hold in the power button and turn the computer off because then I can usually not go past that black screen that comes on for a brief second before it goes on the desktop. I have very few things that are active in msconfig so I have no idea what's going on and why the computer takes so long to start.
View 2 Replies View RelatedI have downloaded the newest RTM 32bit Windoows 7 from Microsoft MSDN and tried to install it on my Celeron 2 Duo 64bit system.. Now when I boot the computer up the Windows logo comes, and then it stays there for 20+ minutes before the system is booted up..
I have tried with other versions of Windows 7 32bit also, but its the same everytime.. Is this because I absolutly need to install a 64bit version? I remember that I once had 32bit Vista on another 64bit system and that worked fine...
Anyone experienced this before?
so my problem is that the installation of Windows 7 Ultimate takes way longer than expected to install. So far I've botten to about 80% on "Expanding files" after about 7 hours. My specs is in my profile, unfortunatly I can't be n�rd precise at this moment, as I havet no possibility of checking while installation is on, but the Microsoft Upgrade Advisor (or what the name was) told me it was good enough to run Windows 7 in both 32 and 64bit. The copy I'm installing is Windows 7 Ultimate 64bit (Swedish DVD), bought packaged with both 32bit and 64bit DVDs. I'll copy the pre-made questions for installation problems under here, with as accurate info as possible.
View 9 Replies View RelatedI decided to try out the backup feature. Over 2 hours ago I started the backup and it is only 32% complete. This seems like a long time to me. I created a disk image of the same data earlier today and it was done in considerably less than 2 hours.
Additional details: Around 160 GB of data. Data is uncompressed.
For the last few days, when I try to manually update definitions of MalwareBytes and SuperAntiSpyware, the downloads are taking an agonizingly long time when before they were almost instantaneous. Same when I try to play the games on Lumosity - they seem longer to display. Scans with MSSE, SAS and MWB show nothing suspicious. Anyone aware of any problems with these programs, or is it my computer?
View 1 Replies View RelatedWith explorer. Copy a large, say 700mb file from folder a to b on a regular HDD, should take 10-15 secs right. If you watch resmon, disk activity, you will see write activity to the destination folder for almost a full minute afterwards.
View 1 Replies View RelatedThe updates to Windows 7 is taking a long time. It has been installing update 7 for over 2 hrs.
View 2 Replies View RelatedCan't tell if Windows 7 or my RAM, certain programs have been loading REALLY slow. For example, Google chrome that took miliseconds to start up, now takes 10 seconds to actually open, and 2-3 minutes to load the page. Other programs i start up with Google chrome at the same time (because 8 GB ram should be able to handle this...) such as Steam, aim, etc also take a long time to start up. However, this only happens when i open them at the same time i open Google Chrome. Then all of a sudden, the finish loading all at the SAME TIME. Like, I would open Chrome, then Steam, then aim, and they would all be loading, and as soon as Google Chrome finishes its 2-3 minute loading, everything loads at the same time.
View 4 Replies View RelatedRunning a brand new HP desktop machine. I've been using it for about a week with no problems ... until today. Certain programs are acting like they aren't launching, but at about 5-10 minutes later, they finally launch. Even the Recycle Bin took about 5 minutes to come up. However, Firefox launches immediately.
4GB of RAM
AMD Athlon II X2 250 Processor @ 3.00 GHz
64 bit
Machine with Windows 7 Pro 32bit.This peculiar problem from 4 days, when the machine is logged in, it takes very long time to acquire ip address (though its a static ip).The Network icon at the task bar keeps searching (rotating) and meanwhile I cannot open any folders or applications.It gets connected after a while approx 10-15 minutes.I have reset the winsock. Tried stopping some unwanted services in msconfig, disabled the built-in firewall, uninstalled antivirus (security essentials).
View 1 Replies View RelatedI just upgraded my HP TX252NR laptop to an Intel X25-M 160 GB SSD. I did a clean install of Win 7 Ultimate 64 bit. I have 3 GB of RAM. My laptop takes about 70 sec from a cold boot to login. This is much faster than the 5400 rpm drive and Vista Ultimate 64 bit. My problem is that if I hibernate the laptop it takes over 3 minutes for it to get to the point I can login. The resuming Windows screen comes up in about 20 sec which is roughly how long it takes to get to the starting Windows screen, then it seems to hang here anywhere from 2.5 to 3.5 minutes. The disk activity indicator is off and the CPU fan is running full speed. My disk score is 7.6 and my processor score is 4.8. I have update the SSD firmware to the latest. I have updated the laptop to the latest BIOS as well. Win 7 is updated with all the latest patches.
View 4 Replies View RelatedFor some reason my laptop takes forever to connect to a shared drive on my desktop on my home network. I've tried connecting to it by mapping the drive and through windows explorer and same thing. Sometimes it won't even connect at all. I don't have this issue with other computers on the network. And when I say a long time I am meaning like 5 minutes or more. At first it was maybe only 1-2 minutes but it is getting worse. My mouse icon has had the spinning ring around it trying to connect the whole time I have been writing this.Both computers are Win 7 pro x64 with sp1. Desktop is wired directly to the router and laptop has excellent signal strength. Both have DHCP reservations set in the router. The way I usually connect is by starting a run box and typing \[desktop pc name][share] then it just spins
View 9 Replies View RelatedI could not find the correct thread to post so please accept my apologies if this is an old resolved bug.This has been winding me for a while now, but today it has totally done my head in.! when I access my music folders from external USB and I click on a folder the grey bar at the top of the folder window takes ages to move across... then I get the red cross in the button. This is a major problem now, the cpu fan goes crazy and well its quite disturbing.To get around this I would access my file from within the music editing software to avoid this problem, but as I'm a Mastering Engineer I need to access the files in their respective folders.
This was never a problem on any other machine I have had before. All drives are fine tested on other machines. They are good. So today I tried it again, same thing. The grey bar at the top went crazy when I tried to access a wav folder to master with 2.5 gigs of data in.The grey bar at the top slowly moves across the top then the red cross thing again in the button, I refresh and the same thing again. Meanwhile the fan goes on and the thing then seems to hang on finding files in folders. So I back out of the folder close it down. Then I went to My computer on the start menu... erm the grey bar again slowly moves to the right, No C drive shows up is empty and the fan kicks in and it sounds like it is going to take off.Then I have to close the machine down as it cannot find anything in thefolders.This is very strange indeed. This only happen when I search for files in folders before hand, normally I can see my drives when I click my computer.I have just rebooted the laptop now and it is good but when I open a folder it goes nuts.
I have Dell Inspiron N5010 laptop, Intel core i3 2 GB ram and 320 gb hardrive. I was running windows 7 home bsic edition 32bit on it.Everything was going fine.Then I saw some files in my E: drive with the .dll exension which i think were reated to the microsoft visual C++ enviroment and i deleted them .Lap top was sill running fine. But when I shut it down and turned on again it gave an error on startup that "one or more peripheral devices may have been removed imporperly". So I formaed my C: drive, where windows was installed and re-installed windows 7 basic 32 bit. Bu even a fresh copy of windows was taking 5 to 6 minutes to boot up after the "windows is starting screen" but eventually it did start. when I tried installing my drivers it gave an error that the drivers are not supported by this system.
And I know the drivers are the correct one because I have used them before with this same windows and same laptop. So I again formatted my C: drive and this time installed windows 7 ultimate 64 bit. But the problem is same it takes 5 to 6 minutes on the "windows is starting screen" and then eventully starts up. And I ran "HDTune" software to see if if my hardrive was okay....and it gave no errors. I even set my bios to "restore default setings" but still no luck.I even tried disk de-fragmenation.....and yeah the drivers wont install even in the windows 7 ultimte 64 bit edition.
Sometimes when I connect to a wireless network it takes windows a long time (+2 min) to id the network and set it as public. Is there anything I can do to speed this up?
View 3 Replies View RelatedI'm fresh with Win 7(64-bit). I've used WindowsXp till week ago. Never tried Vista. On WindowsXP when I press "Sleep" button system turns off both graphic and hard drive instantly. Now days when I press "Sleep", on win 7, it takes him 30 sec at best to turn off hard disk and power. It seams too long to be considered normal since same hardware was used with WindowsXp. I was wondering if this is normal for win 7 and can I do anything to boost that time. I searched web for similar questions and found no luck.I'm using Windows 7 Ultimate.
View 6 Replies View RelatedI recently upgraded my computer with a new motherboard, processor, RAM, and video card. Before I did this, I installed a second fully functional 1 TB internal hard drive just to hold the system image and my important documents. I made a system image using the native software that was available on Windows 7.To be clear, I made a 143 GB system image from my first 1 TB internal hard drive and put it on the second 1 TB internal hard drive. I also moved my important documents over to the second hard drive. (The second drive was completely formatted and turned into a Basic drive beforehand.)After installing the new components, I wiped my first hard drive, deleting all partitions on it, but I forgot that I had one more set of folders that I forgot to move over to the second hard drive. However, since I had the system image on the second hard drive, I figured that I could use that to re-image the first hard drive, pull the files, and wipe it again.Now, since the old motherboard and CPU drivers were saved on the system image, I figured Windows wouldn't be able to load, but as long as the first hard drive contained my files, I thought it wouldn't matter since I could just install the hard drive on the family computer, pull the files, put it back into my computer, and start the installation process all over again.However, when I tried to re-image my first hard drive with the image I had on the second hard drive, I got an error saying that the recovery tools were not compatible, or something to that extent.
At this point, I figured that since the system image was SP1, if I installed Win 7 on my first hard drive and upgrade to SP1, then it would be compatible, so that's exactly what I did.After upgrading to SP1, I tried to re-image the first hard drive, but this time, I used the Win 7 disk in order to do so. I booted from the Win 7 CD, got to the system image restore, and got an image similar to this:Where it says "Intel Raid 0 Volume," I had my C: drive. I assumed that the C: drive was my first hard drive, so I didn't check anything.In the next window, I was told that my first hard drive would be formatted and re-partitioned, so I said yes. When the system was preparing for the re-imaging, I got an error saying that re-imaging failed, and the system would restart.Of course, since my first hard drive was formatted, Windows didn't load, so I tried the re-image again. I didn't get the error, and it showed that the system was "Restoring disk (C: )."However, it was taking WAY too long. 12 hours into the restore, it didn't even go halfway. I left it running while I was at work, and I just came home now and saw that my system was completely frozen. The mouse pointer didn't move, and I left it like that for a few minutes. After half an hour, I held the power button down to turn it off, and tried the re-imaging again.It was going as slowly as it did the second time around, so I canceled the restore, turned it off, registered to these forums off my family computer, and here I am right now.I'm thinking that I should replace all the old parts and try the restore again, but other than that, I'm stuck as to what I should do.
1 x Rosewill CHALLENGER Black Gaming ATX Mid Tower Computer Case, comes with Three Fans-1x Front Blue LED 120mm Fan, 1x Top 140mm Fan, 1x Rear 120mm Fan, option Fans-2x Side 120mm Fan
1 x ASUS M4A79XTD EVO AM3 AMD 790X ATX AMD Motherboard
1 x SAPPHIRE 100283-3L Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
[code]....
Im not a big tech freak and i dont even know my computer that well, but i know how to follow instructions. My laptop is taking an EXTREMELY long time starting up.. its taking like,, at least 6 minutes to start up.
View 9 Replies View RelatedIm using Windows 7 build 7600.
I have a windows server 2003 file server and a windows 2003 SBS domain controler. The file server is a member server. My windows 7 client is joined to the domain. When i log on to the domain, a script runs that maps drives from the file server to my comp. My domain account has Full Control over the drives on the file server.
Since installing windows 7 each time i open an mp3 file (Which are between 10 and 20mb) from the maped network drive, its taking 8 seconds to open each one. Baring in mind i have a GB lan with both my laptop network card and server network card set to 1gbps full duplex. I have a LOT of mp3 files that i browse through, but every time i select a differnt track it takes 8 seconds for it to open, same for the next track and the one after that and its begining to drive me nuts . Ive tried using differnt media players, for example winamp, media monkey, itunes and wmp and with each one i get exactly the same 8 seconds per music file.
This does not happen with one of my xp machines both over wirelesss and hardwired in to the lan, tracks open instantly from one to the other. After messing about with it for a while i stumbled accross something. If i map directly to shares on the network drive (which is set to read only) the tracks open instantly from one to the next no problem. However, if i set the share permission to âfull controlâ, i get exactly the same problem, 8 seconds per music file.
And i REEEEEEALLY dont know why its doing it. As ive said it works fine on windows xp, i have a gb lan with both cards set to 1gb full duplex (have even tried auto negociate ) and cat5 e cabling via a D-Link GB Switch. The only thing that seems to fix it is setting the share on the file server to read only. Now i could just play the tracks via the share and be done with it but, the shares are set to read only for a good reason. I have the network drive (where the shares live) maped to my computer because im always adding to, and manipulating folders on the drive, including the mp3 files. As a work around im having to play the tracks via the actual share and modifly or delete any mp3 files via the maped network drive.
My windows is acting so sporadically, freezing up, taking forever to open a site. I can get to mail but then cannot open it. I don't know what else to do but try another repair install. I cannot find a tutorial on it.
View 9 Replies View RelatedWhenever I want to install a program, my computer takes forever to show the window that guides you through the installation.For example, I download Firefox, Double-click the .exe installation package and then nothing happens for literally 4 or 5 minutes. Eventually the wizard installation window will open and allow me to install by clicking Next etc. But why is there such a delay for the setup window to initially appear. My computer never did this when it was brand new.
View 8 Replies View RelatedI only had my computer a few weeks and already it is starting to take longer to start up. PS I use a wireless connection with a router.
View 14 Replies View RelatedI have windows seven RC1(32 bit) and I get a BSOD when my computer works hard for longer periods of time. I do not have this problem with my vista partition. For example if I do a 30 mins skype call or play a game for 20 mins I get the BSOD. However I can surf the internet and listen to podcast for hours and have no problems.
Heres the error message
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7100.2.0.0.256.1
Locale ID:1033
Additional information about the problem:
BCCode:27
BCP1:BAAD0073
BCP2:807A1B94
BCP3:807A1770
BCP4:923A540C
OS Version:6_1_7100
Service Pack:0_0
Product:256_1
http://dl.getdropbox.com/u/643924/WE...-0.sysdata.xml
http://dl.getdropbox.com/u/643924/051609-28033-01.dmp
My PC Specs are:
Phenom 9600
4 Gb Ram
Gigabyte MA770-UD3
9600 Nvidia Geforce
Let me know if you need anything else.
yesterday i buy a wireless broadband router - 4 ports and i encounter some change, i don't know if it is a problem with the settings or it is normal.
questions:
1. My desktop computer is connected to the router through Lan. when i start the computer. my comp identifies the network for 2 mins.. it is normal? or i need to change settings or the router?
2. i cannot connect to my other PC that is also connected in Lan.
computer takes a long time to shutdown, windows 7
View 3 Replies View Relateddo not able to open and use webcam
View 1 Replies View Related
