Samsung Z810 USB Modem Not Recognized
I'd like to use my Samsung Z810 USB modem under Win7. It worked for Vista.
View Replies (Posted: Friday, May 22, 2009 9:51 PM)
Sponsored Links:
Related Forum Messages for Windows 7:
Modem Samsung Sgh-z810
USB modem Samsung sgh-z810 works in Windows 7. 1. connect modem to USB, install all required drivers and software (if don't work, use compatibility mode with Windows XP) 2. install VMware Workstation 3. install Windows XP on VMware Workstation 4. run XP and install all required drivers and software for modem (it's automatic) 5. now you have internet on running Windows XP on VMware Workstation 6. disconnect from internet on Windows XP 7. run connection manager on Windows 7 8. and now trick, add new HW (VM>Settings>Add>Network Adapter>Host-only>Finish) Network Adapter 9. wait few seconds and connection manager find modem on windows 7 (WTF?) 10. now, you can connect to the internet using connection manager in Windows 7 11. close VMware Workstation and enjoy ;-) I don't know how it's possible, but it works! Cheers!
Posted: 09-27-2009
View 6 Replies!
View Related
Samsung SGH-Z810 Not Recognized
I installed Windows 7 on my toshiba notebook. Everything is fine, but I cant use my 3g modem. The samsung sgh-z810 works on vista and xp. on xp and vista, when i plug in first time to machine, it install a virtual cd, and run setup.exe from it (it is modem's the flash ram). after setup xp and vista recognize this hardware as modem (and card reader) and works. on Windows 7 after the first step (when setup.exe closed) the Windows 7 doesn't recognize the modem. the modem is not listed on device manager... i read, that will works if i make virtual xp mode, but my laptop not support this mode. i saved the drivers from XP with driver-magician, but i cant add device to the device manager. the hardware not shown in the list. i want to "add as older hardware" to add device in device manager, but i cant use the driver .inf files. when i click on it, the device's list is empty, can't choose from the manufacturers / devices list. i can use modem if i run virtual machine with installed XP on windows 7, but Windows 7 "alone" cant recognize this s h i t.
Posted: 11-07-2009
View 4 Replies!
View Related
Samsung USB MWiMAX Modem
i think i finde why my PC have high PING on winodws 7. Here is windows ImageShack® - Done Winodws 7 cant finde this driver, i dont know what should i do, and where i can get this driver? Because i searched a lot of forums but i didnt saw from where i can download this driver. If i try fix this driver, maybe my Ping will fix on winodws 7.
Posted: 11-12-2009
View 2 Replies!
View Related
Samsung SGH Z810 Compatibility
Is someone using samsung sgh-z810 usb (3G, HSDPA), modem successfully with windows 7? I am trying to use it on my MSI WIND U-100 notebook. Windows 7 is running well on the notebook, I have no other complains or hardware issues. I am running the official evaluation copy Build 7100 downloaded from Microsoft. The modem installation consists in the following steps: (For testing purposes I've installed successfully under XP and Vista, the modem is working well) 1 - Plug in the modem in one of the USB slots 2 - The hardware is recognized as CD-drive (this is normal) 3 - The autoplay function starts, installing setup.exe - which installs Samsung's connection manager software 4 - after the installation of the connection manager software the system recognize the modem part of the device and installs the drivers from the "CD"-drive (from itself) 5 - after successfully install, the connection program runs from the pc and that's all. Under Windows 7 I can do the install until the step 3 - installing the connection manager software. In order to solve my problem I already did the following: - installing from the scratch (one by one) using the compatibility mode set to all of the XP-modes and all of the Vista modes - also running as administrator. No matter whatever I did, the system is not recognizing the modem part of the device (it is not included in the list of the devices - not even like unknown device) I would be more than happy if someone could help me to solve this problem PS: I did search for upgraded samsung software and drivers, but I couldn't find anything the device is not even listed on samsung's web-pages. I purchased the modem from official Hungarian mobile service provider.
Posted: Saturday, June 20, 2009 4:36 PM
View 1 Replies!
View Related
Modem Driver Problem / Samsung Rant (M540) Phone
i just installed Windows 7 64bit. I use a Samsung Rant m540 Cell Phone for my Internet connection. I cant get high speed on my road so its alot better than dial up, anyway ive used it for a few years and now i cant seem to get it installed. It works fine on other comps and i had a driver for win xp 64bit that works. I got it installed on the windows 7 and it shows up as the modem and says its working properly but it wont respond when i try to query the modem or connect to the Internet. Im pretty sure i just need a driver for the windows 7 for the phone as modem. But Sprint does not have a driver or program which supports it and neither does Samsung which created the phone. I googled for at least 5 hours with no success ive tried a few different drivers and no luck.
Posted: 02-22-2010 at 08:07:33 AM
View 9 Replies!
View Related
USB Device Not Recognized On Win 7 - USB Mouse
I have a 4 week old Inspiron 1545 with Windows 7 Home premium that has developed an error: USB errors while trying to install a Microsoft USB mouse on this Laptop. Interestingly, my Microsoft USB Mouse installed perfectly first time and worked for about 2 weeks, and then failed. In looking at the system restore points, it tells me that there have been two driver updates to the USB environment since the unit was shipped from Dell. I wonder if an automatic update from Microsoft has somehow inadvertently updated or replaced a Dell factory driver. Two nights ago I spent 45 minutes with Dell tech support doing remote control bug fixing on this laptop. They werent able to fix it (in the time allowed). They downloaded at least one of their newest drivers onto this machine and rebooted it - and they seemed pretty savvy - but still not working. So I went ahead a did a system restore to a point about 10 days back because I could see that a USB driver would be affected (as shown in the system restore menus), and I would like to compliment Microsoft on this very cool functionality! At this point, I've unplugged the USB mouse, used the Device Manager to delete the 'unknown device', and done a system restore back to what I suspected was a working point. But still getting a 'Device not recognized' warning every few minutes, and still don't have a working mouse. I don't want to have to do system restores back to pprevious dates, although I suspect this is one solution.
Posted: Sunday, January 03, 2010 5:48 PM
View 8 Replies!
View Related
3 Usb Modem / Dongle Win7
this unit was working but my server,perlico, sent me a new zyxel wireless modem and after a lot of problems i eventually got it working,but now i cannot my dongle to work,i keep getting message 633.i uninstalled the program and inserted the dungle and it reinstalled the program but it still will not open,tried on a friengs laptop and worked perfect, any ideas.
Posted: Saturday, December 12, 2009 12:22 AM
View 2 Replies!
View Related
USB ZTE Modem Driver
I have a problem, with a USB modem, the USB ZTE modem, Type MODEM 3G multi-mode, GSM / GPRS / EDGE / WCDMA / HSDPA. This device is not identified by the system. As you plug it in, nothing happens because windows doesn't recognize it at all as a modem. The driver doesnt work. I supose It will need a brand new driver in order to work. So Microsoft windows 7 developers, wake up and begin to work on a solution. This kind of modems are getting more and more used.
Posted: Sunday, May 24, 2009 4:47 AM
View 2 Replies!
View Related
Bridge USB Modem With Ethernet
anyone got any idea how to bridge the connection between a usb modem connection with a ethernet connection. i have previously done this with a wifi and wired connection, and was very simple, but im stumped at trying to connect using usb modem.
Posted: Tuesday, September 01, 2009 6:18 PM
View 3 Replies!
View Related
Modem And USB Reader Problems
After installing I get just a bit to many Modems installed! 29 in fact! Good thing I don't use this modem. The below pic shows it all. Any suggestions on how to fix? I tried uninstalling it , but it just reinstalls all of them right back! http://i42.tinypic.com/9hqkok.jpg  The other question is I have USB readers in this PC "Came with it" They shows up in the Devise Manager but not under The "Computer" in the Menu! So I Have no access it them. How does one get them to show up under My Computer? http://i44.tinypic.com/oua846.jpg E-Machime W3609 CPU 3.33 GHz 120 GB HDD 1 GB Ram
Posted: Monday, January 26, 2009 1:49 AM
View 3 Replies!
View Related
Huawei E169 USB 3g Modem Driver
I can't get my Huawei 169 modem to function in Windows 7, I've tried both build 6801 and 6956 -same result As soon as I plug the modem in Windows 7 recognizes it as a usb disk, I can access the disk and launch the on board installer. I've downloaded the latest driver from the Huawei site, but the installer fails with the error "can't find any modem" If I do a hardware scan in the device manager only the usb disk turns up, but not the modem. I'm using this modem on this laptop in both WinXP and OSX without any problems, so the modem and PC is allright... Is there any special windows 7 services that I need to start?
Posted: 12-13-2008
View 9 Replies!
View Related
Huawei USB Modem E220 Drivers
My usb modem from Huawei that I got from Vodafone doesn't work with the drivers I have. Â Does anyone know if the driver for Vista will work or what I could do to make it work. Â If I can't get the modem to work it's no use trying Windows 7 out. If I can't connect to the internet what's the use..
Posted: Friday, January 16, 2009 6:37 PM
View 5 Replies!
View Related
Alcatel X200 Usb Modem Error
i have alcatel usb modem and recantly its always blogoff by its self and re blogon ( by its self ) its big problem for me cuz when its blogoff my internet off if i start it ( connect internet ) its delet the drivers!! and cut internet then its re install the drivers agine. and always like that. some time its still connected for a 1hur but most time its cut after i start internet and some time loop beofre i start connecting it
Posted: 3 Weeks Ago
View 2 Replies!
View Related
ZTE USB Modem Drops Connection
My ZTE USB Modem connects to my service provider and I can launch IE to a home page, however after just a few seconds it disconnects and then shows there is no signal to connect to although before it showed 4 1/2 bars of signal. If I click disconnect, wait for it to time out then close the Modem software and then relaunch it it shows signal again, connects, then disconnects a few seconds later. This modem worked fine on Windows XP SP3 and Vista.
Posted: Monday, July 27, 2009 9:44 PM
View 6 Replies!
View Related
Sprint Mobile Broadband Usb Modem
the usb modem i have from sprint will not work on it i tried it out i like the windows 7 if i could use my sierra wireless 597 modem on it so i had to uninstall it and reinstall my xp vista so what can i do?
Posted: Saturday, July 18, 2009 10:50 PM
View 2 Replies!
View Related
Amigo USB Ca-80u Modem Problem
My modem, "Amigo USB ca-80u", don't work in W7. This modem don't have drivers for Vista. With the XP drivers, the modem is in setup, is detected, but don't work. Any solution for fix this problem? Any software for USB Modems?
Posted: Saturday, May 23, 2009 4:17 PM
View 2 Replies!
View Related
Remove USB Modem Cause Blue Screen
Whenever I am in the process of shutting down Windows 7 and if I removed the USB modem(ADSL) cable, Windows 7 crashes with blue screen(some times system simply gets turned off without proper shut down).This happens only during the shut down process, If I removed USB cable any other time there is no problem. I've not tried removing any other usb devices during the shut down process. I will try later to see if this is problem only with USB modem or all USB devices.I am using HP 2133 Mini Note with VIA C-7 processor 1.2Ghz, 2 gb RAM. Has anyone else faced this problem? Please let me know if there are any fixes/workaround to this problem.
Posted: Friday, January 23, 2009 1:42 PM
View 15 Replies!
View Related
ZTE Model TU25 USB Modem Glitch
My modem works fine. I had the divers with me. Here's the problem, when ever I take the modem out before i shutdown it has an error and crash. Is there a patch for this? My modem is ( ZTE model TU25 USB Modem )
Posted: Thursday, September 10, 2009 12:51 AM
View 3 Replies!
View Related
Wimax Usb Modem Card Drivers Not Found
i recently picked up a wimax usb internet card however the drivers are not being found for window 7 and there is no power going to the device. Currently clear a wimax company is not supporting the issue intill windows 7 goes full lauch and then it could take another month or so before the patch is lauched. I have a buddy who is doing his own code to fix the problem but any help will be greatful.
Posted: Sunday, August 02, 2009 1:14 PM
View 1 Replies!
View Related
ZTE MG880 (CDMA Modem) Usb Issue
i have a problem on my windows vista ultimate 32 bit, when i connecting my ZTE MG880 (CDMA Modem) on my laptop especially at starting modem application, suddenly the sound becomes dead ... I use Compaq CQ40 322 TU... And what the problem ?
Posted: 2 Weeks Ago
View 6 Replies!
View Related
USB Modem Driver USBSER.SYS Does Not Install
The company I work for has a product with a USB Device port implementing the CDC class. Our driver is based on Microsoft's USBSER.SYS driver and we provide the specific INF files so that our product installs as a virtual COM port or as a Modem. It works well on Windows XP, Vista and Windows 7 Enterprise 32-bit versions but I fail to install the same driver for the Windows 7 64-bit Enterprise trial version. The error message is: Windows was unable to install your unknown device. Windows could not find driver software for your device. If you know the manufacturer of your device, you can visit its website and check the support section for driver software. Does anyone have any insight on the possible reason for failure and how we can fix our driver?
Posted: Wednesday, October 28, 2009 9:38 PM
View 5 Replies!
View Related
|
TRACKER
