Samsung MagicTune Not Working
Has anyone managed to get samsung's magictune OSD app running on W7 x64? I have tried various compatibility modes and even disabled TMM with no luck.
I tried both the 32 and 64 bit Vista versions from the following page -
http://www.samsung.com/us/consumer/learningresources/monitor/magetune/pop_download.html
View Replies (Posted: Saturday, May 16, 2009 6:46 AM)
Sponsored Links:
Related Forum Messages for Windows 7:
Samsung TV Not Supported
I upgraded from Windows Vista to Windows 7 in my HP Pavilion dv2415NR the screen on the laptop works fine when I tried to send the video to my Samsung 40 TV I get a message on my TV that the "mode not Supported". The Samsung work under Vista. Any suggestions of how I can get to work. I tried downloading the new driver from NVIDIA.], that did not solve the problem.
Posted: Monday, January 11, 2010 12:21 AM
View 2 Replies!
View Related
DLNA Samsung TV
I have a Samsung LN40A750 TV and apparently for the "A" versions you can no longer get the linkstick. I ordered a "B" version of the linkstick but it didn't work (it said it wouldn't but I figured I'd try it anyway). In the end I settled on purchasing a Linksys WET610N Wireless bridge. That worked as the TV has an IP address and I can use WiseLink to see the content being shared from the computers on my network. The PLAYTO feature in Windows is what really want to work with this lashup but the TV is not recognized by Windows 7 as a device.  Any thoughts on how to get the TV to be recognized as a device while connected to the bridge? Is this something provided by the linkstick for this TV? BTW, it does identify the WET610N wireless bridge as a device in Windows. I have a Samsung Omnia 2 phone. It too is DLNA compliant and I can PLAYTO that device.
Posted: Saturday, January 09, 2010 11:11 PM
View 8 Replies!
View Related
Samsung Monitor Driver
I've had an ongoing problem with this for some time now. You can see here that my Device Manager tells me that I'm missing a video controller, and also in that post is my inability to watch full screen videos online. Here, I talk about the problems I've had with my display driver crashing. Now, yesterday I downloaded Photoshop, and as it opened, a window popped up saying that my "monitor Profile" is defective and needs to be calibrated (See first attachment). If I choose to Ignore Profile, I can use Photoshop as usual, but everything I export has an irremovable yellow tinge. If I choose to Use Anyway, there is no white in Photoshop's color pallet, only the same yellowish color. This got me thinking for the first time that my monitor was the cause of my problems, so I searched online for Samsung 2243swx drivers. On their webpage, they had up for download only one driver, which is for a VGA graphics card (See second attachment). I've been running a PCI graphics card (NVIDIA GeForce 8400 GS), and I was wondering if this could be the problem. Would you say I ought to buy a VGA graphics card?
Posted: 11-28-2009
View 9 Replies!
View Related
Samsung USB Driver
i have a samsung Tocco mobile phone and samsung don't have any windows 7 friendly drivers for it. does anyone know if there is a 3rd party driver i can use to get it working with the samsung studio?
Posted: 10-24-2009
View 3 Replies!
View Related
Samsung 275t Drivers
My current monitor driver default by Windows 7 is generic pnp monitor. with this i cant get my refresh rates higher. i downloaded the samsung drivers from their site, but when running the file i get "cannot open monitor driver, please check the monitor driver or cd" ive tried runnning it in compatibility mode as well. im on x64
Posted: 05-02-2009
View 4 Replies!
View Related
Samsung R60 Drivers
I was wondering if Samsung have released drivers for the R60 laptop that are fully functional in Windows 7, when I installed Windows 7 I had to search for all of the drivers myself, I was given a disk with the laptop but it only works in Vista. When running a benchmark test, the graphics were much better in Vista because I dont think I can find the right driver for the graphics card in Windows 7. Also, a lot of the Fn buttons dont work anymore, for example changing the brightness, turning off the display, showing the battery level on screen, etc. I assume this is done through the chipset driver which I never had to install or even looked for. Also, one last thing, with my graphics card on Vista I get a little ATI icon in the notification area, along with the Catalyst Control Centre, although I never get this in Windows 7.
Posted: 11-15-2009
View 1 Replies!
View Related
Samsung I760 Drivers
I have install the drivers for (Samsung i760) but I think, that they are only for XP, Vista, I get not massage from computer as to if drivers are OK or not (they show in "Divice Manager" I open Windows Mobile Center and my phone said is not conected. Any sugestions as to how to?
Posted: Wednesday, January 28, 2009 12:16 AM
View 7 Replies!
View Related
Cannot Sync Samsung Omnia
have tried almost all the things in most forums concerning this topic. Of hundreds of attempts my device has synchronize twice or thrice in Vista. It does not even recognize the device when connected. Recently upgraded to Win 7 RC. Same problem in Win 7. Tried deleting the partnership, uninstalling and reinstalling WMDC. No difference. The last I tried - unistalled the drivers for the device and tried to connect it to have it reinstalled. The drivers do not load successfully.
Posted: Thursday, August 06, 2009 5:10 AM
View 3 Replies!
View Related
24 Samsung HDMI And Sound
The sound was working on my SAMSUNG and I was trying to temporarily disable it, so I would not distrub my housemates.... So I clicked "disable" on the control panel Sounds gaget, thinking this would temporarily turn it off, like it does within the Networks gaget (I turn off wireless at work, and network port at home). Well it did not temporarily disable it, it deleted it from the system. I have managed to get it to see the HDMI TV at 1080p resolution, but sounds don't work on the TV since I clicked disable. I have tried every setting on the control panel, such as sound devices, graphics, displays, tried the "find a device" all to no avail. How do I enable the sound for the samsung?
Posted: 09-07-2009
View 4 Replies!
View Related
Samsung LN32A650 Problem
I have seen some people having problems with Windows 7 and HDTVs with ATI RADEON Cards. This problem seems to occur with NVDIA Cards too. The problem is when you use the VGA connection on the 1920 x 1080 HDTV, the TV will come up with a MODE NOT SUPPORTED message and go blank. One solution that was proposed was to use the older ATI 8.9 CCC software. I tried this and after the first reboot it worked fine. When I shut down the computer after that, Win 7 said it was installing an update. On the next bootup the MODE NOT SUPPORTED message came up again. I can get Win 7 to run on this TV by using the HDMI but it has the following issues: Screen size at 1920 x 1080 is only 2/3 full screen. No way to adjust on the TV. Display quality -such as text sharpness, is much worse than the VGA mode. Can anybody point me to a solution? Equipment Used: Biostar Motherboard ATI RADEON 4850 Video Card Samsung LN32A650
Posted: Thursday, October 22, 2009 11:07 PM
View 17 Replies!
View Related
Can't Stream To Samsung TV
I just got a new Samsung LN46B750 TV. On the PC side I'm running Windows 7 Ultimate (RTM). The Samsung sever app does what it says it will do, although it's not terribly exciting. I would like to be able to stream from Media Player (and, ultimately, Media Center). Media Player can see the TV but the TV does not see Media Player when I try to Play To. MP gets hung with a message "Contacting Media Server". (The TV has the latest firmware updates.) Can someone tell me what I need to enable to make this work?
Posted: Saturday, October 24, 2009 5:40 PM
View 25 Replies!
View Related
Samsung SyncMaster 932MW
Here's my problem: when I turn my pc to sleep mode, everything is fine, but when I turn it back on it doesn't recognize my monitor anymore and the resolution is much to low. I've tried to put it back in control panel, but the right resolution isn't in there. But, I've discovered that if you put it into sleep mode again and wake it up, it works perfectly again. Anyone who can help me solve this problem? It's very annoying. P.S.: Excuse my English because I'm Dutch. *edit* Might be usefull you know my configuration: Celeron D 366 2.8 Ghz MSI 945GZM6-F 2 gig's of 533 Mhz RAM 80 gig HDD DVD-RAM burner on-board video and sound
Posted: Saturday, February 14, 2009 12:20 PM
View 14 Replies!
View Related
Samsung Laser ML 4500
I have not had any success installing this printer on Windows 7. This printer is connected via LPT1 and I have no problems when running XP. It has been suggested that the XP driver is OK but it refuses to install. Suggestions on how to overcome would be welcome.
Posted: Thursday, September 24, 2009 10:15 AM
View 5 Replies!
View Related
Samsung T220HD Issue
I have a Samsung T220HD and have installed updated drivers for both it and my video card(Nvidia 9800gtx) , but at every resolution other than 1920x1080 (which looks atrocious) it gives a "Mode Not Supported" error. It was working fine in Vista just moments before I installed 7. Does anyone have any ideas as to why it may not be working properly?
Posted: Saturday, January 17, 2009 1:12 AM
View 3 Replies!
View Related
Samsung Instinct Issue
When I plug in my Samsung Instict phone into any of the USB ports, Windows 7 does not even know it is there. On My Computer or the Device manager it does not show up.
Posted: Sunday, May 10, 2009 11:44 PM
View 4 Replies!
View Related
Samsung Pixon Problem
I can't use my pixon with windows 7 it seems. The software that came with it, "samsung new PC studio" didn't quite install properly, but seems to run fine. Windows also found the drivers for my phone online, which was quite helpful, but the problem stems from the software not picking up the phone on my pc. Also the pixon isnt recognized as a removable storage device (a la sony ericcsson phones) and so i cant access my files that way. Does anyone have any ideas? Installing the drivers off the CD gives this: " USB Driver install error: Unable to launch the 1 Drvier Setup file!: Code1" Only option to that is to press "ok" I downloaded the setup.exe of the drivers, and ran that in compatibility mode, this also didn't work. Device manager obviously doesn't recognize it, and searching online doesn't come up with anything. Nor does searching manually and selecting the CD.
Posted: Â Â Â Â Â 06-24-2009
View 4 Replies!
View Related
Samsung T240HD Issue
My Samsung T240HD presents a blank screen upon startup of Windows 7. After resetting 4-7 times, the Intel splash screen appears and Windows starts normally. Are you aware of any fix for this problem? The monitor drivers seem to be installed correctly and the resolution is set to the highest settings. I'm using an XFX ATI Radeon HD 4980 video card.
Posted: Saturday, July 11, 2009 12:52 PM
View 11 Replies!
View Related
Upgrade On Samsung R519
Was running windows vista home premium on my samsung r519, pentium dual core 2ghz, 4gb ram, 500gb HD - Everything was great. Then Samsung informed me that I could upgrade to windows 7 for �17 as I had recently bought this laptop with Vista. So I bought it, installed it and now I regret it. Why? Well.. 1 - I had to download all software again which took ages and I haven't done it all yet. 7 gave me a summary of what I needed to re-install by telling me what was removed since the upgrade but it had to restart and I can't find the list again, is it available anywhere? 2 - text now looks slightly blurry/not as sharp as before even though I've updated all display drivers (to my knowledge) This is across web browsers, OS windows/menus etc 3 - the caps lock alert no longer pops up so I have no way of knowing when the caps are on until I type (very annoying) 4 - apparently, only 2.93gb of my 4gb of ram is now usable is this due to the fact I have the 32 bit version of 7? Will I notice a huge difference in performance now? I'm just wondering if any of you good people know how I can fix any of the above? I guess with point 4 I'll just have to look into upgrading to 64 bit but is this easy/cheap?
Posted: Â Â Â Â Â 4 Weeks Ago
View 9 Replies!
View Related
Samsung F1 Drive Install Issue
Existing Setup Abit IN9 32-Max, 2gig OCZ, E6300, WD 250g, Windows 7 v7264 x32 NO issues, everything runs fine. Removed WD 250g and switched to Samsung F1 Spinpoint 750g drive (which is essentially my old gamming system running on xp). Cannot install Windows 7, regardless of version, locks halfway through install. Hard reset and Drive is no longer detected. I experienced this same issue back when I had the gaming system and the only way to fix it was to disable Command Qeueing ( which was recommended by users with same issue ). The problem seems to be with the nvidia chipset ( in this case 6) not playing nice with some Samsung drives. However, I was able to install XP and of course disable this option. PC then ran fine for a year, no lockups. Basically same system, but will not allow Windows 7 to install. Ive tried different sata ports, different partitions, different Windows 7 versions, different bios settings... Always locks halfway through.
Posted: 07-04-2009
View 3 Replies!
View Related
Samsung J600 Drivers Are Failed To Be Seen
I was on the Samsungs offical site to get USB drivers for my mobile so my Windows 7 (Build 7201) could see my phone and I would bea ble to get photos off it and all that. I did have the program of running it at first, but I did run the installation in compatability mode to bypass this error. And it isntalled perfectly, but despite it being installed properly my mobile still isn't found. Infact Windows sees my mobile as "CUSTT13 Development Platform" instead of Samsung or how ever it is normally seen. Is there anyway to fix this USB driver issue so I'm capable of connecting my mobile to my PC without any problems.
Posted: 06-14-2009
View 0 Replies!
View Related
Samsung Ml-1640 Driver Issue
Recently I installed windows 7 in my system upgrading from vista. Both are 32 bit. My Samsung ml 1640 is not recognized by OS. When I downloaded the Windows 7 drivers from Samsung site the file ml-1640_32bit.exe, installed the smart panel but stops at 75 per cent with the message, "You have no permission to change the settings for this printer. To change settings contact your system administrator." I ran the file as an administrator. I even turned off the UAC. But the drivers won't install.
Posted: 11-14-2009
View 0 Replies!
View Related
Samsung T260HD Monitor Problem
i just bought a new monitor,Samsung T260HD....and i recently upgraded my sony vaio VGN-CR220E to win7 RC.....now my monitor doesnt work...idk if its the driver issue coz there is generic driver installed...the laptop recognizes that there is "Syncmaster" connected but nothin appears in the monitor....please help if anyone has any idea wat i m missing.
Posted: 09-08-2009
View 2 Replies!
View Related
Samsung SGH I900 Driver
Windows Vista recognizing my phone: Samsung SGH i900 Omnia successfully and syncs via USB connection! After I migrate to Windows 7 and found that no driver for SGH i900?!? If anyone knows where it could be downloaded for SHG i900 driver I would be very grateful to him!
Posted: 11-24-2009
View 4 Replies!
View Related
Samsung Gravity 64bit Drivers
Alright, I honestly don't know where else to put this/look for answers as google doesn't help. I just received my new Phone, the Samsung Gravity (sgh-t456) I believe sgh-t459 for people in the states, and I'm trying to get it my pc to recognize it via usb. The CD that came with it can't install, it gives me all kinds of errors.. The samsung website is impossible to navigate and I can't find their support forums (even if they do exist..) My OS is Windows 7 RC1 64bit.. and uh.. That's all I can think of from the top of my head. If you need more info, ask and I'll be glad to help you help me.
Posted: 09-11-2009
View 2 Replies!
View Related
|
TRACKER
