Run Different Language Programs
How do i keep the OS in English, but run another program as a different language
There should be an option to have a program always run as a set language
I would like to be able to run an English, Japanese and Korean program side by side, not reset the computer just to run one app.
I Know about applocal, but some times it does not cut it and the program fails to run properly.
Windows should let me run a program from any country, not just one at a time.
View Replies (Posted: Friday, May 15, 2009 10:48 PM)
Sponsored Links:
Related Forum Messages for Windows 7:
Programs Macedonian Language
I have no problems with instalation of windows 7. Everything is ok with that. The problem is that it doesn`t recognise Macedonian language (cyrillic) when I start to install the macedonian programs. Download the Mozilla Macedonian and you can see that language
Posted: Tuesday, April 28, 2009 2:44 PM
View 4 Replies!
View Related
Programs In Greek Language Have Problems
some programs in greek language have problems,the letters are not in greek,and i cant read them,if i put english its okey.region country ,are in greek,i have download the multi language display pacage.but some programs in greek have problems,nks
Posted: Thursday, June 18, 2009 6:18 PM
View 1 Replies!
View Related
Programs To Change Win7 Language Into Chinese
I'm looking for a program which translates the OS(programs etc) into chinese. I understand that language package is only available for windows 7 ultimate but the cost is too extreme. The computer is a present(dell inspiron 17) I want to give to a friend but they are not very literate in ENglish so I was hoping there were alternative programs I can install to change the language settings. I'm also aware there are windows 7 chinese versions but that too costs alot to purchase.
Posted: 12-23-2009 at 10:15:45 AM
View 1 Replies!
View Related
Can Startup Programs Run As Administrator ?
I have a couple of programs (Logitech Setpoint is one) which need to run as administrator in order to work in some programs (e.g. Visual Studio 2005). They are set to run at start-up, however since I've set them to run as administrator, they don't run. Is there any way to get these to run at start up?
Posted: 10-06-2009
View 1 Replies!
View Related
Run XP Mode To Access Programs
on a pc running vista home premium 64 bit, can i download/install Windows 7 32 bit? I am having trouble with vista recognizing my xp programs. My desire is to try Windows 7 and run the xp mode to access my programs. Is that possible?
Posted: 05-20-2009
View 1 Replies!
View Related
Sound Drivers = Only Able To Run Programs As Admin
When I install the drivers for my HTO Striker 7.1 and restart to complete driver installation, suddenly, I can only run anything if I right click and Run as Administrator.. not even Firefox. Its annoying to have to get the gray User Access Control screen everytime I want to do something, as well as having to right click and left click just to start a program. HTO Striker 7.1 drivers on their site are listed as being good for Windows 7 x64. What could be happening here? Has anyone had this problem?
Posted: 10-04-2009
View 0 Replies!
View Related
The Ribbon Interface Will Be In ALL Programs That Run On Win7
It's called the Scenic Ribbon and you can already see it in Paint, Wordpad and Movie Maker. The Ribbon originated in Office 2007 and has been improved even more in Office 2010. Untill now it has only been a part of Office however starting with Windows 7 the Ribbon will be a part of the Operating System. That means any programmer will be able to add the ribbon to his program instead of the current menu bar. Microsoft envisions a future where all programs running on Windows will have a ribbon instead of the menu bar.
Posted: 05-19-2009
View 9 Replies!
View Related
Run 16-bit Programs From A Command Line
Since DOS 2.0 I have written and collected command line programs. Many do things not possible without command line support. Such as run an Assembler and editor from a .BAT file (I use A86 if you want to search for it) to created and run handy small .COM programs. But none of these 16-bit programs work on my Vista 64-bit. A friend has the same computer I have, but with Vista 32-bit and he verified a few of my .COM programs worked fine. ? Would I be able to install Win 7 32-bit and run them?
Posted: Tuesday, June 02, 2009 8:05 PM
View 3 Replies!
View Related
IS WIN 7 RUN ALL PROGRAMS WRITTEN IN VB6
MY PROGRAM WRITTEN IN VB6 (ARABIC PROGRAM), WHEN I RUN IT ON WINDOWS 7 , ALL MENUE AND COMMANDS DIDN'T TURNED TO RIGHT SIDE ON SCCREEN AS IT IS APEAR ON WINDOWS VISTA OR XP VERSION , (I MEAN RIGHT TO LEFT ) WHAT IS THE PROPLEM..
Posted: Saturday, September 26, 2009 9:39 AM
View 2 Replies!
View Related
Can't Install Programs From Run DL Option In 7077
Not sure if anyone's reported this yet, but I did a clean install of 7077 on my backup computer and anytime I start an application download and select "run" from the download menu, it downloads the program but will not start it, I have to go back and save the file, and run the .exe from there. Anyone else run into this and found a fix?
Posted: 04-10-2009
View 1 Replies!
View Related
Issue: Fresh Win7 Install; Cannot Run ANY Programs
I downloaded Windows 7 from MSDNAA from my school and burned it to a blank DVD (4.90GB I believe is the capacity). Everything seemed to work fine and the burn didn't seem corrupted even when I burned it at full speed, so please keep this in mind for the following issue. After I successfully installed Windows 7 Professional 64 Bit on my system, I ran into an issue. Certain programs will not open or execute at all, whether it be a setup file or even Internet Explorer 8. Windows Media Player opens sometimes, but bugs out too every now and then. This is hindering me because since this is a fresh install, that means I cannot begin to install drivers such as the latest Catalyst drivers for my HD 3870. Even if I open it as Administrator, it does nothing but show the usual "Processing" mouse animation spinning symbol and after a while, nothing shows up. I checked the task manager and I see it is still running, but since I don't see anything, I have to kill the process. Again, this happens with more than 50% of the Application files/Programs that I have tried and this is a fresh install of Windows 7. I have tried to re-install Windows 7 again to no avail. One weird error message I got was when I tried to open the sample "Wildlife in HD" video just to test it out: "Server Execution Failed". I don't know what else to try and right now I am using my laptop with Windows XP to use this forum since I can't even open my browser on my desktop. Is there a way to solve this problem? Sorry for my first lengthy post, but I wanted to provide as much detail as possible. And I think my specs should show below since I filled that part out....does it?
Posted: 09-20-2009
View 4 Replies!
View Related
Most 32-bit Programs Won't Run In RTM
I've been using Win7 since the beta, and not once have I had this problem 'till now (and I've used builds 7000, 7100, 7229, and 7260 without issues). But starting with build 7600.16384 (I have the RTM now (7600.16385)), I've been having trouble getting 32-bit programs to work. At first they were slow to start--now they won't start at all. Originally I could work around it by running them apps as Admin w/compatability for Vista SP2, but now even that doesn't work. 64-bit apps startup fine (Photoshop, IE8, any built-in app, etc.), but anything 32-bit will just sit in the Task Manager all day, with the memory usage never above 3-4MB, and simply fail to start. No error messages, no abrupt termination, just nothing. The only exceptions have been FL Studio 8 and Steam (but Steam games won't run), both of which run perfectly despite being 32-bit. I can only last so long using IE and not being able to play any games.
Posted: 08-03-2009
View 9 Replies!
View Related
Aero Interface Doesn't Run With Some Programs
Ok this is just a curiosity thing but every time I run Winamp instead of windows media player ( sorry WMP 12 lovers its just good at what it does) and I hover over it to you know see what part of the music its at it just has a guffy little thing on it like its ancient winamp 2 or 3 I think or something.
Posted: Friday, February 27, 2009 3:43 AM
View 4 Replies!
View Related
Some Programs Won't Run/install, Explorer Slow, Ect.
It was all fine until yesterday. I copied over a game from my laptop the night before (I just installed 7 on this computer recently, was copying over stuff from my laptop) and also finished installing World of Warcraft and not long after I turned off the computer. The next day I switched it on and didn't notice anything at first but some programs wouldn't run (Winamp would have a blank space where the music list normally is). I tried installing some virtual drive programs such as magic disc and power iso which I usually use for isos I rip onto the computer (I lost some discs before so I've been doing that recently) but the magic disc programs wouldn't run properly and power iso wouldn't progress during its installation. I tried installing some anti spyware like AVG and Avast (Spyware doctor detected 300 odd tracking cookies that appeared in the past week I installed, way more than it did with my vista laptop) but they would just either not respond (and then pop up with a message saying it took a while and wouldn't respond) or just not even progress when it was installing (on the part where it begins putting down files) Explorer itself is slow and takes a while to load when on "My computer" and usually wouldn't display USB drives. Once it did but it didn't actually open it up when I clicked on it and prevented the window from responding. I have used task manager to close all these down when they wouldn't. When I tried switching off my computer it just stayed on the logging off/shutting down screen. I tried leaving it overnight, expecting it to finally switch off but it only ende up going into sleep mode (and popped up with the log in screen when I waked it up) I have switched the computer off and on a few times but its still the same. I also got the disc I used to install and tried to repair it but it wouldn't boot from the disc when I switched on the PC and when I opened it up and ran the setup file, it came up with the usual "are you sure you want to run this" dialog and didn't do anything.
Posted: 08-12-2009
View 6 Replies!
View Related
Cannot Run .Net Framework Related Programs (Visual Studio Crashes)
I have just received a brand new Dell XPS 435 PC. I have just installed Windows 7 x64 Ultimate and Installed all Windows Updates. There is a problem with .Net related programs. - I started by installing SQL Server 2005 x64 Client Tools (SQL Server Management Studio). The setup program crashed while installing the client tools. I checked the event log and there are errors reported by the .Net Runtime Optimization Service. I uninstalled SQL Server 2005. - Then I installed Visual Studio 2008. When I start Visual Studio, it crashes during the splash screen. - I found out about Aaron Stebner's .NET Framework Setup Verification Tool (http://blogs.msdn.com/astebner/pages/8999004.aspx). I ran the tool and it reports that the .Net Framework 3.5 SP1 test fails. The log reports this error: [10/14/09,15:23:17] ****ERROR**** File C:WindowsMicrosoft.NETFrameworkv3.5Windows Presentation FoundationNPWPF.dll is not installed on the system (Let me know if you need the full log.) - There are a lot of errors in the event log. They are about mscorsvw.exe crashing and about the .NET Runtime Optimization Service failing to compile some files.
Posted: Wednesday, October 14, 2009 7:43 PM
View 14 Replies!
View Related
SCCM SP1 Client - Config Mgr Icon - Run Advert Programs Icon
I have SCCM SP1 Client installed on my Windows 7 Enterprise PC. Normally the "Configuration Manager" Icon and the "Run Advertised Programs" Icon display in Add/Remove Programs or in the case of Windows 7, "Programs and Features". These icons are not visible in "Programs and Features" although the SCCM Client ccmsetup.log says the SCCM client was successfully installed. Is this a glitch or are these icons now displayed elsewhere?
Posted: Friday, August 14, 2009 4:10 PM
View 2 Replies!
View Related
Programs Can't Run "running Side By Side"
i have some programs that will not load, avg , future mark and some others. when i start them a window pops up and says they are running side by side and can't open. please fix and restart program. what does this mean? i googled it but it was not in laymans term. any help will be appreciated.
Posted: Monday, May 04, 2009 1:49 PM
View 2 Replies!
View Related
Choosing Different Language
I am going to order my free windows 7 upgrade . The problem is i want to choose different language for order (my current language is russian and i want to install english). Will i have any problems if I choose another language? Has anybody expirience about ordering windows 7 upgrade with other language? I really need your help, because i dont want to spend 20 bucks (for shipping) and find out i throw away my money and free copy of windows 7.
Posted: 4 Weeks Ago
View 4 Replies!
View Related
Difference Between Language
Does anybody here was able to see the difference between a Windows 7 installation disk in another language than English and a Windows 7 installed in English + a language pack (MUI)? Personally, I don't see any. But I think my MUI (French) is still incomplete because there is some places in Windows which are still in English. Note: The question is valid for any language.
Posted: 05-08-2009
View 3 Replies!
View Related
Language And Keyboard
I have a German Keyboard but I wish to use my Language as English at the moment windows 7 will not allow me to set the English Language German Keyboard.
Posted: Monday, June 22, 2009 10:27 AM
View 2 Replies!
View Related
Foreign Language Support
I notice in the compare section on Windows 7 it has "Work in the language of your choice and switch between any of 35 languages" as a feature available only in Windows7 Ultimate. Does this mean that Home Premium and Professional will not allow me to work in a language besides English if I don't have Ultimate?
Posted: Wednesday, October 28, 2009 7:01 PM
View 8 Replies!
View Related
Support Japanese Language
I've downloaded and installed Windows 7 RTM. Every thing is OK, but my Windows 7 doesn't support Japanese, Chinese and Korean language. When I open file or visit website that have that language, they can display. I also want to type Japanese in this version, but I cann;t find the Windows IME.
Posted: Â Â Â Â Â 08-08-2009
View 2 Replies!
View Related
Keep Changing Language Into Portuguese
I have just purchased a new laptop with Windows 7 Home Premium installed on it. I chose Traditional Chinese as the system language when I activated the Windows. Everything went smoothly until I shut down and restart the machine. The system automatically update itself and install Portuguese as the default language. I can't do anything about this but recover the system and so keep losing the softwares or other updates that I have installed.
Posted: 2 Weeks Ago
View 1 Replies!
View Related
Upgrade Xp In Other Language Than English
I am a XP user in Holland, so I used Dutch as a language for my computer. I know I could use the English, but so it is. I tried to upgrade my computer to Windows7, but it says that an other language is not possible. When I read the dixtionary files online then I red that it is still possible with some extra actions. Is this true or do I red it wrong?
Posted: Friday, August 21, 2009 6:20 AM
View 2 Replies!
View Related
Upgrade Language Problem
I tried to upgrade my vista home premium (Italian) with the win 7 RC (en-Us) upgrade but it says i can't because of the language difference. is there a way to do it? I don't want to start a clear installation. can i change the language of windows vista in some way to make it work?
Posted: Wednesday, July 29, 2009 3:06 AM
View 2 Replies!
View Related
Upgrade Install Need Same Language ?
I get some problems when installing Windows 7. (no network drivers). So I thought about a Upgrade Install and the drivers might work then. But It tells me that i need to have the same language in my system that I have on my windows 7 installation disk. How do I solve this?
Posted: Wednesday, February 11, 2009 1:37 PM
View 2 Replies!
View Related
Upgrade From Vista To W7 With Different Language
I have notebook with Vista Business English version and I would like to upgrade to W7 Professional German or Ultimate German version. I must buy FPP version. (computer is not qualified in the Windows 7 Upgrade Option Program) Question is if is possible to upgrade from Vista Business English to W7 where i can keep my files and settings or must I choose the custom option and I will lost all my settings and files please?
Posted: Tuesday, November 10, 2009 8:40 AM
View 3 Replies!
View Related
Language Packs For W7 - Import From VISTA
Anybody know if during the RC other language packs will be available. If not could I "Poodlefake" or Backport the language packs from the VISTA system. I'd like to try the Icelandic pack so some of our "Normal" i.e non technical users back home can check / try Windows 7. (Of course they all speak excellent English -- like most Scandanavian countries English is a mandatory language in Schools here and even as adults around 90% here speak it fluently but it would be nice to test Windows 7 in a "Working environment" away from the IT testing areas to see how it performs in day to day work. (Maybe not 100% mission critical stuff but for reasonably robust office situations).
Posted: 05-06-2009
View 0 Replies!
View Related
|
TRACKER
