I tried to overclock my AMD Phemom II X4 955 about 5 minutes ago. I changed the multiplier to 19x and voltage to 1.5 like I saw in one of PCWizKid's videos. Now when I turn my computer on, nothing shows up on my monitor, and my keyboard and mouse don't come on. How can I fix this?
View 9 Repliesproblem with network sharing i have windows 7 64bit starter version and i set up a ad hoc but the " turn on network sharing " doesn't shows! and another problem when i enter name and password and next it say's that network cannot set up.i wanna share my network in the pc to my iphone with wifi and i have wifi cart in my hp probook 4520s
View 9 Replies View RelatedI had windows vista 32 bit earlier. Then I got windows 7 professional upgrade in trial period. I didn't notice how it happened. Of course it must be my mistake. Now when i boot from windows 7 it shows 64 bit and in vista it shows 32 bit. The system asks before booting which one to choose. It's today only that I have installed but I am not facing any problem as such except that i need a product key within 30 days. Should i leave as it is or uninstall vista somehow. Would i be able to reboot my system using the 32 bit vista CD?
View 5 Replies View RelatedMy printer keeps giving me the error message "A printer error has occurred, turn off the printer, then press on button to turn on. See your documentation" I have unistalled it held down the on button and cancel button at the same time to print a test paper, but still can't get anything to print.
View 9 Replies View RelatedI just got a new HD and tried to just plug it in on my old HD with Windows 7 but I can't find it anywhere no meter that it get recognized and installed at the beginning, I tried to install my old XP and it shows only 698 GB on the other hand Windows 7 shows 715GB.This HD is 750GB.And shouldn't those anti static bags that they(HD) are packed be closed hermetical instead this HD was with a bag that was just folded and glued with duck tape (made of paper) with a "made in china" letters!
View 9 Replies View Relatedi always crash whenever i play need for speed world. it would start for a few minutes or a few seconds. im not sure if its driver related, overheating GPU, or worst, a dead GPU.
View 1 Replies View RelatedI'm using a Toshiba L350D-03N Laptop computer (2.0GB RAM, 1.86GHz Pentium Dual Core, Mobile Intel(R) 965 Express Chipset Graphics) and now when I open "My Computer", nothing shows up, the loading bar in the address shows loading progress, but after it's done, nothing else happens. I will enclose a screenshot of it. If it has any relation to the icons not showing up on my pictures,
View 5 Replies View RelatedI would like to stream my tv shows I record in Media Center to the tv in my livingroom. My PC is in my bedroom. The hdtv in the bedroom has a hdmi input, but the tv in the livingroom has a rca input. Is there a way that I can stream the tv shows into the livingroom? I have been on computer for two hours trying to find a solution. I cannot afford an XBox.
View 7 Replies View RelatedSometimes my computer slows up and I check the memory and windows shows I have less RAM. Is that why it slows up? I don't remove anything so can't understand why this happens.
View 2 Replies View RelatedDVD RW display almost all CDs as blank cd ,what to do ?
View 3 Replies View RelatedFor the last few days I've been running some CPU intensive programs which I wrote. My laptop was getting really hot (70+�C), so I decided to blow into the vent to clear the dust out. However all this did was clog the fan with dust and it stopped spinning, so I used a safety pin to hook the dust out. The fan started spinning and it blew a load of old dust out, and my laptop is now running in the low 40's.
However now task manager shows the CPU usage as 100%, but when I sort the processes by CPU time, nothing is using much of the processor, firefox sometimes jumps up to 50%, but it doesn't stay there for long.Even when I boot into ubuntu, everything is still running really slowly.Also, speedfan reports my CPU speed as 600mhz, sometimes it shows a few other values (1400, 1200, 1800 etc), I have two core2 duo 1.83 ghz processors, so I wasn't expecting to see 600mhz!
For my radio project and podcasts I've invested in a digital microphone. I also got a wireless keyboard and mouse with volume control, not very important but it factors in.
When I start Windows I have two sound devices: The actual speakers and this ProSound mic. Under the actual speakers would be things like VLC and under the mic would be other vital things like Iron (Chrome). If I want to watch/listen to something online I have to plug out the mic. This puts all the programs under the Speakers device. If I plug it back in these programs RETURN to the ProSound mic.
So first of all I need to know why my programs made this choice and how do I put a stop to it? Secondly how do I make my speakers my primary device so I can use these awesome volume controls I paid out the *** to use.
Running Windows 7 Ultimate N x86 on a Dell Inspiron 6400I used MSConfig to set the computer to boot into Safe Mode - Minimal Services. I did nothing else. That's the only thing I did.Now when it gets to the login screen, nothing shows up. Just the cursor, the Ease of Access button, and the Shutdown button. No choosing users, no entering passwords, nothing. Which means I cannot log into any accounts. All I can do is shut it down or restart the computer.I'd also turned off system restore a while back because of an infection there, but forgot to turn it back on and so I have no way to roll the computer back.I tried hitting F8 and telling it to boot normally, but it continued through Safe Mode, so no luck there.
View 9 Replies View Relatedi need some help with windows 7 64 bit system showing me only 2.68gb of useable ram.i understand that windows 7 uses like 1gb ram but that still should be 3gb of ram left showing in my system.my graphics card is 1gb but even still its 64bit os and it shouldnt matter sinve over 4gb can be read using 64bit system.
View 6 Replies View RelatedWhen ever i try to turn my pc on it shows GRUB on a black screen
i have installed WUBI 9.04 ubantu linux now i cant log in to any os
weirdest think happened. i was using a software hddregenerator and i made a bootable usb pen drive using it . But after the software formatted the pen drive ,now the total space is shown as 1.91 GB instead of the original 14.8 GB. How do i bring my pen drive to its original size
View 9 Replies View RelatedI had two 500G drives in raid-0. I then took apart the raid, formatted the two drives, installed into the machine on a DIFFERENT sata controller, everything works well. I use it a few days. Then I just boot the machine once more and, can't see my 500g drives AT ALL. They have simply vanished.
I check the disk management WHAT? it shows ONE 1t drive there, RAW filesystem. I shutdown and take out one drive, reboot and STILL it shows just one terabyte drive there. One, two drives, any SATA port, it always shows as one terabyte drive.
I rip both drives out, put in USB case and stick in my laptop, shows as one 500g drive, RAW filesystem, nothing on disk. Very nice. Incredible.
So now I've destroyed the partitions, formatted the drives...put them in the Windows 7 machine...and now I just wait how long will it take for win 7 to decide they are actually a single terabyte drive again.
And no, my sata controller (intel on Asus P5Q) is not set to raid mode either. If I have to reinstall Windows 7 for the third time to get it to work without amazing trickery.
I have a WD 500GB HDD plugged into my PC via USB, the drive was brand new and had a 90GB partition and a 410GB partition on it, I formatted the larger partition with Partition Wizard and now in disk management the drive only shows as 90GB, there is no unallocated space where the partition was before. I've run 5 different partition recovery tools (Partition Wizard, Acronis True Image WD, Easus Partition Recovery, Partition Table doctor, Active Partition Recovery) but none of them can see anything more than 90GB, what's happened to the rest of it and how can I recover it?
View 9 Replies View RelatedI recently got a virus and had a stick of ram go bad at the same time (bad luck). I decided to scrap the 4 gigs of ram and ordered 8 gigs. This meant I needed to move from 32 bit Win 7 to 64 bit. I wiped the partition to completely remove the virus and installed 64 bit. I realized that Windows Explorer (under "Computer") was showing the correct size of the drives and used space but if you "open" the drive to see the files and folders there is nothing there: "This folder is empty". I have a Ubuntu Live CD and can see the files there, so I am sure the data is still there but I can't get to it in windows 7. I installed and reinstalled drivers for my motherboard but no luck. I had Windows 7 check on updating the drivers for the hard drives and it said it was using the best driver available.
View 3 Replies View RelatedI though that using the Recorded TV section would be PERFECT for managing the movie series that i ripped from my dvd archives, but WMP AND WMC refuse to see them, even though I added their folders into the Recorded tv libraries.
View 3 Replies View RelatedI set WMC to only keep a certain number of episodes, (10 or less) then to keep 'Until space needed." However, it keeps recording episodes. For some, I have 30 or more episodes. I have to delete them manually by leaving WMC and doing it through Windows explorer. How do I set WMC to only keep the number of episodes I specify? I have a Ceton infiniTV tuner card, if it matters.
View 1 Replies View RelatedHow do I remove a dvd slide show without deleting the pictures. I know you can remove picture from the dvd but for some strange reason this does not work for me. If I happen to go back to the dvd for one reason or another the pictures reappear.
View 3 Replies View RelatedI have Windows 7 and I'm trying to connect to a wireless n router. When I look at it under available networks it says "Security Type: WEP" but my router is set for WPA. I can access it as WPA on my late 2008 macbook pro, but no matter what I do (disabling the wireless n adapter, restarting the computer, etc.) I can't get it to recognize my network as WPA and thus any password I enter is marked as incorrect.
View 6 Replies View RelatedMy computer folder shows nothing, no HDDs or DVD drives. I checked disk manager everything is properly assigned. I can still open everything via typing C or D in the adress bar, but it's quite annoying.
View 4 Replies View Relatedi activated my windows 7 2 ultimate now it showing its not geniune..so go fr windows activation...now after restarting it is showing a blank page and asking grub comands.
View 1 Replies View RelatedMicrosoft installed some Windows 7 updates recenly and now my CD/DVD drive isn't listed as a Drive in the " Computer" window. I can play and burn cd's but it doesn't list it as a drive until I insert media.I'm on a HP laptop runing WINDOWS 7 64BIT .
View 2 Replies View RelatedI just upgraded from vista 64-bit to win7 64-bit and I'm having a couple of issues already. first issues i've noticed is that my "all programs" under the windows start button now shows nothing. an empty list... anyone know what might be causing this or how to fix it??
also, after my computer goes into power savings mode, it won't come back from it. another annoying issue...
Because windows gave me the blue screen of death yesterday, I had to reinstall, now it won't show my second laptop HD. During the install, I partitioned both drives, and it detected them, now it only shows my 1 HD with the windows directory in it. How do I solve this issue?
View 9 Replies View RelatedI had a big blip that showed up on the screen telling me that to lengthen the life of the battery, I needed to change my power.It gave me 2 choices - one was Dell recommended. No explanation so I chose the "recommended" setting.I discovered that even though I was still plugged in, my taskbar showed me operating on battery.When I opened the pc today, it was still on battery even though it was plugged in.Later in the day, it automatically switched over electricity.I'm assuming this is the way it's supposed to work but I've done searches on Power Settings etc and if I wanted to revert back to the way I was using the battery I can't find it. I even did a "restore" and it didn't change.Where do I find the setting that refers to this selection?
View 2 Replies View RelatedMy pictures file shows only ICONS...Want it to display thumbnails...nothing I have done works
View 1 Replies View RelatedThere's something on my screen that has been occurring recently that I have no idea what it is, where it comes from, or how to get rid of it. I can't click it of do anything but move it and cancel it. It occurs at random occasions but mostly when i'm playing games. It prevents me from typing in those games and on the computer. I don't know where else to go for this or how to get rid of it.
View 2 Replies View Related