Modem And USB Reader Problems
After installing I get just a bit to many Modems installed! 29 in fact! Good thing I don't use this modem. The below pic shows it all. Any suggestions on how to fix? I tried uninstalling it , but it just reinstalls all of them right back!
http://i42.tinypic.com/9hqkok.jpg
Â
The other question is I have USB readers in this PC "Came with it" They shows up in the Devise Manager but not under The "Computer" in the Menu! So I Have no access it them. How does one get them to show up under My Computer?
http://i44.tinypic.com/oua846.jpg
E-Machime W3609
CPU 3.33 GHz
120 GB HDD
1 GB Ram
View Replies (Posted: Monday, January 26, 2009 1:49 AM)
Sponsored Links:
Related Forum Messages for Windows 7:
All In One USB 2.0 Card Reader No Drivers?
im running an evga sli 58x, and windows 7 64bit 7077 i have the RC1 version of windows 7 but i hate to install that and as i have all my games and everything id have to reinstall with it(major pain) plus im not even sure if that would fix my problem anyways when i plug my card reader in i can't access it at all, it does show up in device manager but it says drivers not installed. I don't think they make this card reader anymore and there would be drivers floating around for a card reader, so what are my choices?
Posted: 06-18-2009
View 0 Replies!
View Related
USB All In 1 Mini Card Reader
I bought this Generic USB All in 1 Mini Card Reader off eBay (Some Cheap chinese thing) It worked fine on my previous setup, Windows Vista x64, and it still works on my fathers computer, Vista x64 I believe. But When I try to connect it to my current Windows 7 x64 install, it justs gives me an I/O device error, I think it might have something to do with the Device driver for Win 7 It might not be compatible, I don't know just thought somebody might have an idea if I can get it to work in Windows 7.
Posted: 4 Weeks Ago
View 1 Replies!
View Related
3 Usb Modem / Dongle Win7
this unit was working but my server,perlico, sent me a new zyxel wireless modem and after a lot of problems i eventually got it working,but now i cannot my dongle to work,i keep getting message 633.i uninstalled the program and inserted the dungle and it reinstalled the program but it still will not open,tried on a friengs laptop and worked perfect, any ideas.
Posted: Saturday, December 12, 2009 12:22 AM
View 2 Replies!
View Related
USB ZTE Modem Driver
I have a problem, with a USB modem, the USB ZTE modem, Type MODEM 3G multi-mode, GSM / GPRS / EDGE / WCDMA / HSDPA. This device is not identified by the system. As you plug it in, nothing happens because windows doesn't recognize it at all as a modem. The driver doesnt work. I supose It will need a brand new driver in order to work. So Microsoft windows 7 developers, wake up and begin to work on a solution. This kind of modems are getting more and more used.
Posted: Sunday, May 24, 2009 4:47 AM
View 2 Replies!
View Related
Bridge USB Modem With Ethernet
anyone got any idea how to bridge the connection between a usb modem connection with a ethernet connection. i have previously done this with a wifi and wired connection, and was very simple, but im stumped at trying to connect using usb modem.
Posted: Tuesday, September 01, 2009 6:18 PM
View 3 Replies!
View Related
Samsung USB MWiMAX Modem
i think i finde why my PC have high PING on winodws 7. Here is windows ImageShack® - Done Winodws 7 cant finde this driver, i dont know what should i do, and where i can get this driver? Because i searched a lot of forums but i didnt saw from where i can download this driver. If i try fix this driver, maybe my Ping will fix on winodws 7.
Posted: 11-12-2009
View 2 Replies!
View Related
Realtek USB 2.0 Card Reader X64 Issue
I have a notebook Gateway M 1617, with Realtek card reader but it doesn working with the new Windows 7 build 7100, I've tried go to realtek driver web site, downloaded the Windows 7 driver version also got the win vista version. but nothing worked for me..
Posted: 07-23-2009
View 1 Replies!
View Related
15 In 1 Card Reader USB Device Stops Functioning
When I get to my computer after being away I get the message that a USB device has been stopped and this is what I found. This driver responded slower than expected to the resume request while servicing this device: Driver File Name : Driverusbuhci Driver Friendly Name : UHCI USB Miniport Driver Driver Version : 6.1.7100.0 (winmain_win7rc.090421-1700)
Posted: Friday, June 05, 2009 10:54 PM
View 2 Replies!
View Related
Shuttle Card Reader PC 23 (USB) - Error Code 10
I have tried several times to use my Shuttle Card Reader (PC23) that is connected to my mainbord on a free internal extended USB connector. Error message : Error Code 10 - can`t use device. If I insert a SD Card in the SD slot on the Card Reader, and use the hardware trobleschooting in Windows 7 RC : Win 7 can reconise the SD Card and I can use it, but only during the session. Next time i start the system I have the same error as before. For this 4 in one Card Reader there is no Driver for Win XP or Vista nesesary, so i think there normally no driver needed for Windows 7 RC either.Â
Posted: Thursday, August 13, 2009 7:50 PM
View 4 Replies!
View Related
Trouble Getting A USB IRDA Reader To Wok On Win 7
I have loaded windows 7 on a virtual machine (using VMware Fusion) on my Mac. One of the main reasons for doing this is to be able to use a PC based program that uploads data from my Polar sports watch. The up load can only be done via infrared. In the past I had no difficulty doing this on my PC with XP OS.
Posted: Monday, May 18, 2009 1:48 AM
View 6 Replies!
View Related
Broadcom USB Smart Card Reader Not Working
After upgrading my Vista Business SP2 (32-bit) to Windows 7 Ultimate RC (32-bit) my Broadcom USB smart card reader does not work any longer (Dell Latitude E6400 with built in smart card reader). The newest available driver from dell support was already tested (Broadcom, driver date 09/23/2008, version 1.0.0.1, digitally signed WHQL, released by dell in March 09), but the device can not start (Error code 10) with Windows 7. With the Microsoft WUDF Driver (Usbccid, driver date 06/21/2006, version 6.1.7100.0) the device starts but whenever I insert my smart card an additional device is detected (other device - smart card) but no driver found - Error message is: The drivers for this device are not installed. (Code 28). What else can I try to get this reader working again (with vista sp2 the smart card reader was working fine with the broadcom driver)?
Posted: Tuesday, May 12, 2009 11:11 PM
View 11 Replies!
View Related
Dell USB Card Reader Not Working Properly
I have a Dell XPS Studio 435T that was running Vista Home Prem. 64 bit. My card readers were labeled G:, H:, I:, and J: and were there when I got the machine. C: and D: are the Dell Vista Home Prem. 64 bit OS and the Dell Restore partition, E: and F: are my DVD drives. These drives always appear. The system was built early May and was the A07 BIOS. When I needed to read an SD card, I plugged the card into the proper slot, nothing happened? Discovered the drive was NOT on Explorer nor COMPUTER desktop icon when double clicked. I have a Canon printer with card slots, put the card in the printer after I turned it on and I can read the card, so it isn't the card (unless the 435T's slot can't read 8GB SD cards). I don't get any errors when starting the system and nothing apparent in the Event Viewer. I called Dell figuring they'd be aware of this problem and have a suggestion. Wrong, they claim it isn't a common problem and is either a h/w problem or I 'did something' to the system that caused this. Suggested fix was to restore the system to the shipped state and I was not too happy about that. The Rep. then agreed to get on my system and look at it. I showed him the drives and the Device Manager that had an 'Unknown Device' and that it had no driver. I showed him that when I tried to update the drive it said I had the correct driver. I deleted that device and then had Device Manager search for changes and it found the same 'Unknown Device'. Now the Rep. thought I had a driver problem and proceeded to re-load the Intel Chipset drivers. I think I did replace those with more recent ones, but I let him. It installed INSTANTLY and the rep. said it meant I had the drivers installed... Checked the drives again, not there. Next step as for me to shut-off the system and restart into the BIOS screen and RESET the BIOS to the factory default. OK, but when the system booted, didn't do anything for the problem. Now the Rep. asked if I could open the case and check the cables to the reader bar. This was after he came back on-line after checking what to do next. By this time I decided I wanted to try something, I have a USB single card reader. I put the SD card into it and inserted it into the card readers USB connector. It found the device, although it didn't assign a drive? Put that same device into the USB connectors behind it and it had the same results but the Rep. was now convinced I had power to the card reader and wouldn't need to open the case. I then used a real USB Flash drive, put that in the card bar and it worked and could be read (and the Rep. wanted to connect and open the flash drive to be sure, which I allowed). So, the Rep. wants to REPLACE the h/w. From the reports I've seen, this is a waste of time. His response was he's never seen other reports of this failure and my only other choice is to restore Vista to the shipped state. So I OK'ed the h/w replacement. I know I've seen the drives as recently as 2 weeks ago. I was surprised one day when I opened Explorer and saw additional drives and then determined they were the card slots. As suddenly as they appeared, a few days later they were gone. Dell eventually replaced the device, cable from motherboard to it, and even the motherboard. In all cases, replacing that component had the card slots reappear on boot, only to disappear sometime later. This had been ongoing since July when I first discovered the problem. Only after I installed Win7 was the true problem discovered. I had a random BSOD under Vista with DVD Flick. Not often, but it happened. All I had to do was re-boot and it worked fine. Assumed it was a memory problem. After installing Win7 and booting after a BSOD from DVD Flick Win7 reported a USB device was not working properly and showed a list of USB devices. The suggestion, unplug and re-plug the device and if it didn't fix it, replace the device. Well, looking in Explorer, the card slots were gone. Unplugged the cable and put them back in (case had to be opened to do this) and booted, problem was gone. I've since removed DVD Flick and the problem has not come back. So, the question is why wasn't the USB port working properly? I assume an initialization problem, and I see a HOTFIX was just released for Nvidia systems with 4GB's of memory and USB devices stop working so I wonder if the USB drivers could be at fault here?
Posted: Wednesday, November 11, 2009 1:01 PM
View 2 Replies!
View Related
Huawei E169 USB 3g Modem Driver
I can't get my Huawei 169 modem to function in Windows 7, I've tried both build 6801 and 6956 -same result As soon as I plug the modem in Windows 7 recognizes it as a usb disk, I can access the disk and launch the on board installer. I've downloaded the latest driver from the Huawei site, but the installer fails with the error "can't find any modem" If I do a hardware scan in the device manager only the usb disk turns up, but not the modem. I'm using this modem on this laptop in both WinXP and OSX without any problems, so the modem and PC is allright... Is there any special windows 7 services that I need to start?
Posted: 12-13-2008
View 9 Replies!
View Related
Huawei USB Modem E220 Drivers
My usb modem from Huawei that I got from Vodafone doesn't work with the drivers I have. Â Does anyone know if the driver for Vista will work or what I could do to make it work. Â If I can't get the modem to work it's no use trying Windows 7 out. If I can't connect to the internet what's the use..
Posted: Friday, January 16, 2009 6:37 PM
View 5 Replies!
View Related
Alcatel X200 Usb Modem Error
i have alcatel usb modem and recantly its always blogoff by its self and re blogon ( by its self ) its big problem for me cuz when its blogoff my internet off if i start it ( connect internet ) its delet the drivers!! and cut internet then its re install the drivers agine. and always like that. some time its still connected for a 1hur but most time its cut after i start internet and some time loop beofre i start connecting it
Posted: 3 Weeks Ago
View 2 Replies!
View Related
ZTE USB Modem Drops Connection
My ZTE USB Modem connects to my service provider and I can launch IE to a home page, however after just a few seconds it disconnects and then shows there is no signal to connect to although before it showed 4 1/2 bars of signal. If I click disconnect, wait for it to time out then close the Modem software and then relaunch it it shows signal again, connects, then disconnects a few seconds later. This modem worked fine on Windows XP SP3 and Vista.
Posted: Monday, July 27, 2009 9:44 PM
View 6 Replies!
View Related
Sprint Mobile Broadband Usb Modem
the usb modem i have from sprint will not work on it i tried it out i like the windows 7 if i could use my sierra wireless 597 modem on it so i had to uninstall it and reinstall my xp vista so what can i do?
Posted: Saturday, July 18, 2009 10:50 PM
View 2 Replies!
View Related
Amigo USB Ca-80u Modem Problem
My modem, "Amigo USB ca-80u", don't work in W7. This modem don't have drivers for Vista. With the XP drivers, the modem is in setup, is detected, but don't work. Any solution for fix this problem? Any software for USB Modems?
Posted: Saturday, May 23, 2009 4:17 PM
View 2 Replies!
View Related
Remove USB Modem Cause Blue Screen
Whenever I am in the process of shutting down Windows 7 and if I removed the USB modem(ADSL) cable, Windows 7 crashes with blue screen(some times system simply gets turned off without proper shut down).This happens only during the shut down process, If I removed USB cable any other time there is no problem. I've not tried removing any other usb devices during the shut down process. I will try later to see if this is problem only with USB modem or all USB devices.I am using HP 2133 Mini Note with VIA C-7 processor 1.2Ghz, 2 gb RAM. Has anyone else faced this problem? Please let me know if there are any fixes/workaround to this problem.
Posted: Friday, January 23, 2009 1:42 PM
View 15 Replies!
View Related
ZTE Model TU25 USB Modem Glitch
My modem works fine. I had the divers with me. Here's the problem, when ever I take the modem out before i shutdown it has an error and crash. Is there a patch for this? My modem is ( ZTE model TU25 USB Modem )
Posted: Thursday, September 10, 2009 12:51 AM
View 3 Replies!
View Related
Wimax Usb Modem Card Drivers Not Found
i recently picked up a wimax usb internet card however the drivers are not being found for window 7 and there is no power going to the device. Currently clear a wimax company is not supporting the issue intill windows 7 goes full lauch and then it could take another month or so before the patch is lauched. I have a buddy who is doing his own code to fix the problem but any help will be greatful.
Posted: Sunday, August 02, 2009 1:14 PM
View 1 Replies!
View Related
|
TRACKER
