I had a problem loading a creative sound card. Now I need to close the question but don't know how.Uninstalled almost all Creative Drivers with Add and Remove programs.One wouldn't uninstall:Creative Consol Launcher Product Version 2.61.Restarted Computer and tried again but it wouldn't uninstall, when I checked the size of the file there was no size there.To finish I checked for Creative Technology Limited files in Uninstall or change a program and apart from the Consol Launcher there weren't any. Next I switched the computer off, plugged in the Creative XFi sound card and restarted.When it started it said in the bottom right hand corner it had found the FXi and the device software had been successfully installed.I downloaded the three files in your email, restarting after every file. When I downloaded the Creative Console Launcher it overwrote the old version that wouldn't uninstall, at the end when I restarted for the final time Windows 7 had recognized it.The answer to the problem after uninstalling all of the Creative files then doing a "Clean Boot". The clean boot was quite easy to do.
I have just acquired a creative Audigy 2 Platinum Pro (Model SB0290) from a friend, however Windows can't detect it so I can't install the driver. In device manager a device called Multimedia Audio Controller shows up under Other Devices.
I have an asus A8n-sli board with the Nforce4 chipset. I have creative x-fi xtreme music installed on the board and the sound works fine in XP.
The issue is that the when I try to install the drivers it keeps telling me that there is no compatible hardware installed. In device manager it shows an audio device but no available info for it. I tried the reinstall method and moving it from one slot to the other.
I am running 4 gb of ram, Windows 7 64bit and do have the on-board audio turned off via the bios.
I have tried installing drivers for the nforce4 chip-set but they will not work, Is that the issue? Are there a compatible set for this, I have tried the xp64 and vista 64 drivers but with no luck.
I have been trying to get my sound card (Creative X-FI SB0460) to work under windows 7 x64, i have followed both a standard method of installation and the "Have disk" installation both failed, the "have disk" method reports it found driver but encountered an error then, fails with a "code 10" error, "the device cannot start".It has identified my device as "creative x-fi audio processor(WDM)" rather than just "multimedia audio device", but not installed and drivers.
My soundcard (Creative SB Live! Value CT4670) is not compatible with Windows 7. i cannot find the drivers in anywhere. For the specifications of my computer, click on "My System Specs" .
I just purchased and install a Blaster X-Fi Xtreme Audio Card and downloaded from Creative the Win 7 drivers. Everything started to go fairly well. I configured for a Quadraphonic Speakers configuration. Tested sound, using Manage Audio Device, at all four speakers and I could hear the sound. However, when I used the Window Medial Player or any other player, no rear speakers sound can be heard.
I have installed a new Creative "Soundblaster X-Fi Surround 5.1 Pro USB Audio System with THX SB1095" soundcard. I disabled the old on-board card. Note: It's USB. When I start-up, shutdown, sleep or wake, I get a very loud POP thru the speakers.I contacted Creative and they told me this is "normal" because Windows 7 is polling the USB input to see if there is anything connected. This doesn't sound right, because it happens when I shutdown or sleep, too! Why would Windows poll a usb input while shutting down or going to sleep?
I recently bought a dell computer second-hand from my friend, who had XP installed on it. It came with a subwoofer and a set of 4 regular speakers. On it, he had installed a form of creative volume control in addition to windows volume. The way it worked was he had the windows volume set to 100% at all times, and the creative volume control around 3% for regular browsing, 10-25% for gaming and 50% or higher for rocking out with music. I recently acquired windows 7 home premium x64 and upgraded my operating system. My soundblaster card has all the necessary drivers and the audio is all hooked up properly, and the only thing missing is this form of volume control. After looking around for the old software and trying a few different freeware and shareware programs, nothing has pulled through for me;
Seen this enough here and elsewhere with people not knowing or understanding the differences between the different cards. For example have seen too many instances of someone recommending regular X-Fi drivers with the Xtreme Audio. With that said here we go,
1. Audigy SE/LS/Value, X-Fi Xtreme Audio and the Sound Blaster 24 bit
All of these cards are virtually identical hardware-wise, and for the most part the drivers are interchangeable. The only thing the Xtreme Audio has over the others is that it gets to use some of the X-Fi software (and supports Entertainment mode only). Drivers for all of these cards can be found on Creatives support pages,
------------------------- Creative Worldwide Support > Sound Blaster
the Audigy and Live 24 bit can be found by using the "If your product is not listed above, please click here." link at the bottom of the page. Alternatively you can also try/use the Daniel_k package,
------------------------ SB P17X Series Support Pack 2.0 (07/31/2009) - Aud... - Creative Labs
that has been modified to work with all the above cards (single installer and driver) as well as return the use of some of the applications that used to work in XP (and Vista if the card was bought recently enough and came with Vista drivers on the CD).
2. The Audigy 1, 2 (all, including the 2 Value) and 4 series. These cards again all use the same driver and can be found through the saem link as above. And again there is also the Daniel_K driver set,
---------------------------------- SB Audigy Series Support Pack 3.6 (11/09/2009) - Creative Labs
3. Original X-Fi series and the new Titanium series. Again latest drivers as well as some of the applications can be found on Creative's site, as well as the daniel_K set,
----------------------------------------------------- SB X-Fi Series Support Pack 2.0 (05/15/2009) - Creative Labs
Again like the regular Audigy drivers, these will not work with the Xtreme Audio.
4. That leaves the original SB Live series of cards. There is not now and never will be any support for these cards from Creative, and I really wouldn't expect them too considering most of these cards are from the Windows 95/98 era. For anyone with one of these cards the only option you really have (applies to Vista as well) is yet another Daniel_K modified driver set,
------------------------- SB Live! series Support Pack 1.5 (08/09/2009) - Creative Labs
Creative SoundBlaster 5.1, got a problem installing with driver, any solution? i check the creative site, they don't seem to have an installer for my sound card?
I had noticed that a lot of people first had sound issues with their Creative X-fi soundcards. Most of them sorted it out by running the Creative drivers in Vista compatibility mode, or by installing the support pack released by a member on the Creative support forums.
The problem for me is that when I do a fresh install the drivers (either the official or the support pack) I can hear sound properly from the speakers before the computer restarts. However once I restart to complete the driver installation, the sound is gone once Windows loads again.
If I do an uninstall of the drivers from device manager the sound comes back once again, but once I restart it is gone again.
I can't explain this weird behavior but think somehow Windows is overwriting the drivers after a restart. I'm just wondering if anyone hear knows why this is happening the way it is?
I currently have a Creative X-fi Xtremegamer fatality pro, and 4GB ram. I also have a leadtek winfast pvr 2000 which installed properly and works fine (aside from no audio) so i'm wondering if that might be conflicting some how.
As old as Creative Extigy external sound device is it was easy to install and set up in Windows 7 by using compatible with XP and the latest old drivers Creative has along with their player. Using 5.1 speaker set up with Artez speakers connected to the external device made it easier.
When i downloaded the drivers for CT4810, it automatically installed some Realtek stuff. In control panel Realtek Digital Output is selected as default device (Realtek AC'97 Audio).
i hav dual boot with Windows 7 64-bit ultimate RC and win XP..... my windows 7 does not detect my sound card. when i try to install any drivers , i get a msg "Setup is unable to detect any supported product on ur system" [i tried many drivers]..In the Device manager, drivers for "Multimedia Audio Controller" & "PCI Simple communication controller" are not installed.. but no issues with win XP.