I did a Windows 7 reinstall on my HP Pavillion. I thought it was working fine. The internet was running very, very slow so I did a restart. When it rebooted this came up: " Please do not power off or unplug while installing update 10 to 116..." Well it's been at 10 of 116 for an hour now. Nothing seems to be happening. I fear I might have done the Windows 7 reinstall wrong. After all, it only took on of the DVDs that HP sent to me.
so my problem is that the installation of Windows 7 Ultimate takes way longer than expected to install. So far I've botten to about 80% on "Expanding files" after about 7 hours. My specs is in my profile, unfortunatly I can't be n�rd precise at this moment, as I havet no possibility of checking while installation is on, but the Microsoft Upgrade Advisor (or what the name was) told me it was good enough to run Windows 7 in both 32 and 64bit. The copy I'm installing is Windows 7 Ultimate 64bit (Swedish DVD), bought packaged with both 32bit and 64bit DVDs. I'll copy the pre-made questions for installation problems under here, with as accurate info as possible.
Wy is java 32 bit taking so long to install on windows 7 the 64bit installed fine now I have been trying to install 32bit and I have tried closing my firewall and antivirus as well as the manual and have uninstalled the java that was installed. Now it has been installing for 6 hrs and I don't know what else to try?
Why is this. Like 10 minutes plus and it still says recycling. It should only take a second. Is it bad to let it continue at its own pace or should I restart the PC and try it again?
My computer shutting Down has been staying on longer than it used to. Please let me know what I need to do to make it run faster again like when after I first bought it
I have downloaded the newest RTM 32bit Windoows 7 from Microsoft MSDN and tried to install it on my Celeron 2 Duo 64bit system.. Now when I boot the computer up the Windows logo comes, and then it stays there for 20+ minutes before the system is booted up..
I have tried with other versions of Windows 7 32bit also, but its the same everytime.. Is this because I absolutly need to install a 64bit version? I remember that I once had 32bit Vista on another 64bit system and that worked fine...
I'm fresh with Win 7(64-bit). I've used WindowsXp till week ago. Never tried Vista. On WindowsXP when I press "Sleep" button system turns off both graphic and hard drive instantly. Now days when I press "Sleep", on win 7, it takes him 30 sec at best to turn off hard disk and power. It seams too long to be considered normal since same hardware was used with WindowsXp. I was wondering if this is normal for win 7 and can I do anything to boost that time. I searched web for similar questions and found no luck.I'm using Windows 7 Ultimate.
My neighbor's laptop hdd seemed not to be working right, he had left the laptop in the closet for 2 years anyway, so it seemed not a loss to run a utility that might bring the hdd back [might not], so I started the low level hdd pre-format from a disc I had been given.
That was about a month ago, and the 250 gb hdd is still not done. Should it really take this long, or is the hdd totalled?
I have a Lenovo 3000 N100 with windows Vista 32 bit. I know it's possible to upgrade these successfully to windows seven from what I've read on the Lenovo Forums. Just to be safe I decided to run the upgrade adviser tool. It says it should only take a few mins to scan, but I've ran the thing for 45+ mins and it still keeps going. Is this normal for it to take more then "a few mins"?
My Toshiba Sattelite has recently started to have a few problems. When I boot it up, it takes about 5 minutes to get past the Welcome/Please Wait screen. After that there is a black screen which takes a further 5-10 minutes to get past.
My Samsung laptop brought couple months back keeps taking a long time to sleep. The actual time taken seems to vary greatly, sometimes a few seconds, but otherwise hours upon hours (I at that point shut it down).
The time it takes for it to sleep does not seem to always correlate to the numbers of applications I have open either, nor the RAM usage. Sometimes it sleeps fine with a lot of programs open, other times it fails to when there are only a few.
I decided to try out the backup feature. Over 2 hours ago I started the backup and it is only 32% complete. This seems like a long time to me. I created a disk image of the same data earlier today and it was done in considerably less than 2 hours.
Additional details: Around 160 GB of data. Data is uncompressed.
I have a drive that is a 15 GB partition on a 80 GB disk. It is an old disk, so could be failing, but action is strange. Other partitions on the drive succsessfully completed the checking disk procedure, but the 15 GB partition is taking an enourmous amount of time for each file after a swift run of the first 300 files. After that, I'm estimating it takes 10 minutes per file and has been running since 11AM yesterday. It is now near 8AM and it is still only at file 781. Is it possible for a failing disk to manifest itself in one partition before the others? Or is there some other possibility that I should examine.
For the last few days, when I try to manually update definitions of MalwareBytes and SuperAntiSpyware, the downloads are taking an agonizingly long time when before they were almost instantaneous. Same when I try to play the games on Lumosity - they seem longer to display. Scans with MSSE, SAS and MWB show nothing suspicious. Anyone aware of any problems with these programs, or is it my computer?
I recently upgraded my computer with a new motherboard, processor, RAM, and video card. Before I did this, I installed a second fully functional 1 TB internal hard drive just to hold the system image and my important documents. I made a system image using the native software that was available on Windows 7.To be clear, I made a 143 GB system image from my first 1 TB internal hard drive and put it on the second 1 TB internal hard drive. I also moved my important documents over to the second hard drive. (The second drive was completely formatted and turned into a Basic drive beforehand.)After installing the new components, I wiped my first hard drive, deleting all partitions on it, but I forgot that I had one more set of folders that I forgot to move over to the second hard drive. However, since I had the system image on the second hard drive, I figured that I could use that to re-image the first hard drive, pull the files, and wipe it again.Now, since the old motherboard and CPU drivers were saved on the system image, I figured Windows wouldn't be able to load, but as long as the first hard drive contained my files, I thought it wouldn't matter since I could just install the hard drive on the family computer, pull the files, put it back into my computer, and start the installation process all over again.However, when I tried to re-image my first hard drive with the image I had on the second hard drive, I got an error saying that the recovery tools were not compatible, or something to that extent.
At this point, I figured that since the system image was SP1, if I installed Win 7 on my first hard drive and upgrade to SP1, then it would be compatible, so that's exactly what I did.After upgrading to SP1, I tried to re-image the first hard drive, but this time, I used the Win 7 disk in order to do so. I booted from the Win 7 CD, got to the system image restore, and got an image similar to this:Where it says "Intel Raid 0 Volume," I had my C: drive. I assumed that the C: drive was my first hard drive, so I didn't check anything.In the next window, I was told that my first hard drive would be formatted and re-partitioned, so I said yes. When the system was preparing for the re-imaging, I got an error saying that re-imaging failed, and the system would restart.Of course, since my first hard drive was formatted, Windows didn't load, so I tried the re-image again. I didn't get the error, and it showed that the system was "Restoring disk (C: )."However, it was taking WAY too long. 12 hours into the restore, it didn't even go halfway. I left it running while I was at work, and I just came home now and saw that my system was completely frozen. The mouse pointer didn't move, and I left it like that for a few minutes. After half an hour, I held the power button down to turn it off, and tried the re-imaging again.It was going as slowly as it did the second time around, so I canceled the restore, turned it off, registered to these forums off my family computer, and here I am right now.I'm thinking that I should replace all the old parts and try the restore again, but other than that, I'm stuck as to what I should do.
1 x Rosewill CHALLENGER Black Gaming ATX Mid Tower Computer Case, comes with Three Fans-1x Front Blue LED 120mm Fan, 1x Top 140mm Fan, 1x Rear 120mm Fan, option Fans-2x Side 120mm Fan 1 x ASUS M4A79XTD EVO AM3 AMD 790X ATX AMD Motherboard 1 x SAPPHIRE 100283-3L Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
With explorer. Copy a large, say 700mb file from folder a to b on a regular HDD, should take 10-15 secs right. If you watch resmon, disk activity, you will see write activity to the destination folder for almost a full minute afterwards.
I'm trying to install Windows 7 Ultimate x86 on an HP 430 laptop. The Windows installer can't find the laptop's hard drive so (as a solution I found while googling) I tried Diskpart's clean and clean all functions. The clean function finished quickly but the clean all has been going on for more than 24 hours now. Is it supposed to take this long? The laptop has a ~500gb hard drive and an i3 processor.
Can't tell if Windows 7 or my RAM, certain programs have been loading REALLY slow. For example, Google chrome that took miliseconds to start up, now takes 10 seconds to actually open, and 2-3 minutes to load the page. Other programs i start up with Google chrome at the same time (because 8 GB ram should be able to handle this...) such as Steam, aim, etc also take a long time to start up. However, this only happens when i open them at the same time i open Google Chrome. Then all of a sudden, the finish loading all at the SAME TIME. Like, I would open Chrome, then Steam, then aim, and they would all be loading, and as soon as Google Chrome finishes its 2-3 minute loading, everything loads at the same time.
my yahoo email is taking too long to response on log out and then i get this message.The connection has timed out The server at [URL] is taking too long to respond The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.and i click try again it does the samething usually i have to click tryagain twice are go to my yahoo homepage and click my email and then logout again and usually after tha it logs out .I though maybe it was because i was using open DNS on my router so i switch to dynamic again but tha didn't help .
Running a brand new HP desktop machine. I've been using it for about a week with no problems ... until today. Certain programs are acting like they aren't launching, but at about 5-10 minutes later, they finally launch. Even the Recycle Bin took about 5 minutes to come up. However, Firefox launches immediately.
4GB of RAM AMD Athlon II X2 250 Processor @ 3.00 GHz 64 bit
Machine with Windows 7 Pro 32bit.This peculiar problem from 4 days, when the machine is logged in, it takes very long time to acquire ip address (though its a static ip).The Network icon at the task bar keeps searching (rotating) and meanwhile I cannot open any folders or applications.It gets connected after a while approx 10-15 minutes.I have reset the winsock. Tried stopping some unwanted services in msconfig, disabled the built-in firewall, uninstalled antivirus (security essentials).
I just upgraded my HP TX252NR laptop to an Intel X25-M 160 GB SSD. I did a clean install of Win 7 Ultimate 64 bit. I have 3 GB of RAM. My laptop takes about 70 sec from a cold boot to login. This is much faster than the 5400 rpm drive and Vista Ultimate 64 bit. My problem is that if I hibernate the laptop it takes over 3 minutes for it to get to the point I can login. The resuming Windows screen comes up in about 20 sec which is roughly how long it takes to get to the starting Windows screen, then it seems to hang here anywhere from 2.5 to 3.5 minutes. The disk activity indicator is off and the CPU fan is running full speed. My disk score is 7.6 and my processor score is 4.8. I have update the SSD firmware to the latest. I have updated the laptop to the latest BIOS as well. Win 7 is updated with all the latest patches.
Someone read my shutdown log and told me this.shutdownProcess name="spoolsv.exe" shutdownStartTime="4908" shutdownEndTime="24938" processEndTime="-1" shutdownDuration="20029"My shutdown went from 10 seconds to 30 seconds after I installed my printer's drivers from the disc it came with. He told me to get rid of the driver and install the newer ones from the HP website, but after I uninstalled the printer and it's drivers the shutdown still dragged even when the printer wasn't installed. I went ahead and got the newest driver and the problem still remains.I tried to do a system restore to before I installed the printer, but I kept getting this error message. I tried it again in safe mode too, but to the same result. Here's the error message.can I fix the system restore or just get rid of this service so I can replace it with the newer driver's one?
For some reason my laptop takes forever to connect to a shared drive on my desktop on my home network. I've tried connecting to it by mapping the drive and through windows explorer and same thing. Sometimes it won't even connect at all. I don't have this issue with other computers on the network. And when I say a long time I am meaning like 5 minutes or more. At first it was maybe only 1-2 minutes but it is getting worse. My mouse icon has had the spinning ring around it trying to connect the whole time I have been writing this.Both computers are Win 7 pro x64 with sp1. Desktop is wired directly to the router and laptop has excellent signal strength. Both have DHCP reservations set in the router. The way I usually connect is by starting a run box and typing \[desktop pc name][share] then it just spins
I could not find the correct thread to post so please accept my apologies if this is an old resolved bug.This has been winding me for a while now, but today it has totally done my head in.! when I access my music folders from external USB and I click on a folder the grey bar at the top of the folder window takes ages to move across... then I get the red cross in the button. This is a major problem now, the cpu fan goes crazy and well its quite disturbing.To get around this I would access my file from within the music editing software to avoid this problem, but as I'm a Mastering Engineer I need to access the files in their respective folders.
This was never a problem on any other machine I have had before. All drives are fine tested on other machines. They are good. So today I tried it again, same thing. The grey bar at the top went crazy when I tried to access a wav folder to master with 2.5 gigs of data in.The grey bar at the top slowly moves across the top then the red cross thing again in the button, I refresh and the same thing again. Meanwhile the fan goes on and the thing then seems to hang on finding files in folders. So I back out of the folder close it down. Then I went to My computer on the start menu... erm the grey bar again slowly moves to the right, No C drive shows up is empty and the fan kicks in and it sounds like it is going to take off.Then I have to close the machine down as it cannot find anything in thefolders.This is very strange indeed. This only happen when I search for files in folders before hand, normally I can see my drives when I click my computer.I have just rebooted the laptop now and it is good but when I open a folder it goes nuts.
I have Dell Inspiron N5010 laptop, Intel core i3 2 GB ram and 320 gb hardrive. I was running windows 7 home bsic edition 32bit on it.Everything was going fine.Then I saw some files in my E: drive with the .dll exension which i think were reated to the microsoft visual C++ enviroment and i deleted them .Lap top was sill running fine. But when I shut it down and turned on again it gave an error on startup that "one or more peripheral devices may have been removed imporperly". So I formaed my C: drive, where windows was installed and re-installed windows 7 basic 32 bit. Bu even a fresh copy of windows was taking 5 to 6 minutes to boot up after the "windows is starting screen" but eventually it did start. when I tried installing my drivers it gave an error that the drivers are not supported by this system.
And I know the drivers are the correct one because I have used them before with this same windows and same laptop. So I again formatted my C: drive and this time installed windows 7 ultimate 64 bit. But the problem is same it takes 5 to 6 minutes on the "windows is starting screen" and then eventully starts up. And I ran "HDTune" software to see if if my hardrive was okay....and it gave no errors. I even set my bios to "restore default setings" but still no luck.I even tried disk de-fragmenation.....and yeah the drivers wont install even in the windows 7 ultimte 64 bit edition.
Sometimes when I connect to a wireless network it takes windows a long time (+2 min) to id the network and set it as public. Is there anything I can do to speed this up?
