Installs Fine, Reboots And Hangs

Oct 23, 2009

Okay so I bought the Windows 7 Pro Upgrade 64bit using the Student download via Digitalriver.. I downloaded it on Windows 7 RC2 32bit and I followed the steps that was posted in the error thread to make an ISO file and I booted the disc and installed 64bit. Everything runs fine except when I get to the final phase of installing and it restarts my computer, the computer hangs at the Windows is starting up screen..

Someone said to try disablign the secondary LAN in BIOS but that was already disabled for me and it still doesn't work..

View 4 Replies


ADVERTISEMENT

Installs Fine, Runs Fine, Reboots..not Fine

May 20, 2009

so i finally decided to install Windows 7 x86 - everything went well - put all the standard stuff on there etc - i rebooted many times because of installations and updates

on my last reboot it just got stock in the bios screen (verifying dmi pool data..success! etc)

so i rebooted, same thing, took the disc out, same thing - turned off boot devices same thing

tried to use window's useless repair tools (whatever happened to repair install?) which didn't help - so i decided to format and reinstall - then it says it was unable to do that (partition error or something)


the annoying this is...is that this EXACT..i mean EXACT same thing happened when i installed vista sp1 from scratch - this happened - and to fix it i had to leave my pc open overnight with the hard drive cables all unplugged..in the morning with my fingers crossed i tried the installation again - and it worked.

my d: always disappears (single hard disk sata 233gig (250)) - sometimes it'll vanish from my computer and stuff - but this can't be the problem because the d: is a single drive on its own - my c: is a25gig partition from my e: - so it's completely unrelated.

does it matter how i replug the sata cables (2 of them) into the mother board? - they're both being recognised anyway

this is really annoying though - mostly because there isn't really an explanation - and because this random stuff always happens to my pc! - is it my hard drive because that's the only thing that would half- make sense

View 5 Replies View Related

MSOffice 2003 Pro Installs Fine But Cannot See It Under ALL

Aug 27, 2012

I installed MSOffice Pro 2003 fine in WIN7 and I can find it under Programs86 but not under Start, All Programs.This is a re-install after WIN7 install and before it always showed up.I did a custom install of 2003 and selected Publisher, Access and Word, since I later want to install MSOffice 2010.But why do I not see 2003 under All Programs now?

View 3 Replies View Related

PC Boots Fine, But Around 5 Minutes After Login It Reboots

May 27, 2012

Additionally, on startup after one of these reboots, if I had anti-surge protection on it would say a surge was detected even though there was no surge. Well I assume there wasn't cause it always said there was, and I doubt that as nothing else was affected. Also, when I took the anti surge off, it still rebooted.

Build
Mobo: ASUS P5G41T-M LX PLUS - LGA 775 - G41 - Support DirectX 10 - Up to 8Gb DDR3
CPU: Intel Pentium D 3.0 GHz
PSU: Diablotek EL series 500w
RAM: Corsair XMS3 8 GB (2 x 4GB) 1333 MHz PC3-10666 240-Pin DDR3 Memory
HDD: Western Digital Caviar Blue 500 GB SATA III 7200 RPM 16 MB Cache Bulk/OEM Desktop Hard Drive
Disk Drive: Asus 24xDVD-RW Serial ATA Internal OEM Drive
GPU: Sapphire ATI Radeon HD 4550

View 15 Replies View Related

Freezes Reboots And Hangs At Splash Screen?

Dec 5, 2012

About week ago my computer started freezing and rebooting and then hangs at bios splash screen (will stay there with nothing happening for hours if u let it) until you reboot it than it comes back fine until it does it again. The only thing I noticed is if the machine is off for a while it takes a lot longer for it to happen, If you restart it it last around 15 -20 mins.

1) Updated all drivers and checked device manger for errors.

2) checked and defragged drive C: drive (ssd)

3) checked both for events and dmp files (nothing ) made sure reporting was on

3) Ran windows mem check froze twice while testing once with both strips and once with only one strip installed

4) replaced ram
OS Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
MOTHERBD Gigabyte Technology Co., Ltd. P55A-UD3
PROCESSOR 2.93 gigahertz Intel Core i7 K 875
COOLING DUAL FAN H50 LIQUID CLOSED LOOP

[code]....

View 4 Replies View Related

Random Reboots Or Hard-hangs After Start-up, When Gaming?

Apr 1, 2012

I have been having random reboots and sometimes hard-hangs whenever I am starting to play any PC games after start-up. I have to keep resetting and run through any checks I could think of but the checks always find everything to be okay. Sometimes I do get BSOD and I remember vaguely something about SYSTEM SERVICE EXCEPTION and also the DRIVER IRQL NOT LESS OR EQUAL phrases.[CODE]

View 9 Replies View Related

HOW Windows 7 Installs?

May 19, 2012

When you first boot from a Windows 7 installation DVD, the first thing you see is a black screen with the words "Windows is loading Files" and a progress bar.The next screen is black with the words "Starting Windows" with the usual Coalescing Squares.Then you get the Blue Splash Screen - Language - Time - Country.During the above processes, is everything being loaded and run from RAM, or is the HDD involved at all?

View 3 Replies View Related

Multiple Installs

Sep 1, 2009

Will windows 7 Ultimate allow the installation onto a home PC and laptop with the same installation disc?

View 4 Replies View Related

How To Log Program Installs

Nov 13, 2011

I have windows 7 pro - I have several very expensive programs and important files, and uncountable hours of setups.I can't risk doing it over. I really need to start logging all software installations everything - registry additions/changes - directory & file additions/changes - etc.If something breaks, I need information to repair with (not withstanding I can do a backup and restore, maybe). I used to have a nifty little program that did this nicely for me in win 98 but I don't remember it's name or where I can get it today if I could remember it's name it was a very small program - I can't program myself anymore cause of the injuries - I get confused. Also, I noticed the registry in win 7 appears different than in win XP, which is a complication I hadn't expected.I could be all wet, but I understand that windows logs the information but also deletes the information. Likewise, I understand that temporary directories contain the information - but I do not know how to save it before windows deletes it, if that is the case. I know a lot about older windows but not the latest releases.Think I may be doing something wrong, looking in the wrong place or not doing something I should be doing before the install? (I was injured in 1969 and again during my graduate year in engineering, and I became a bit slow.)I would like to use windows own software to accomplish this simple but seemingly monumental task. Maybe windows administrative programs would be of help but I don't know where to look for the right stuff. When windows becomes slow, gets buggy after an install, it's a bummer because diagnostics are limited and it's been years since I used a prompt (don't recall key commands), so that would be a last resort.I cannot afford a genuine backup solution until well after the holidays as I am a housebound disabled veteran and my income is a bit limited (my network upgrade cost a bundle as did our several computers and server what with isolation transformers and uninterpretables). So, knowing how to make a free installation log, would be swell, like strawberries and real whipped cream.

View 3 Replies View Related

Prevent Installs For Other Admins

Jun 2, 2011

Here in our office network most users have to have admin access to run certain applications. I am wanting to prevent these admin accounts from further installing applications, etc. Is there an easy way to accomplish this using group policy, applocker or the like?.

View 3 Replies View Related

Mouse Moves During Installs?

Dec 8, 2011

Just did a fresh install and now when I install any software my mouse will immediately jump to "next" or "install" of that software pop up. How do I disable this feature?

View 1 Replies View Related

Deleting Old Installs Once Updated?

Jan 12, 2013

when I update a driver or go through the Windows Update, what happens to the old Driver? Can I delete/uninstall the old Drivers once I update to the current drivers?

Essentially, am I losing Hard Drive space after each update? Since as I update, I install which overlaps the older Drivers, so the size just keeps getting bigger and bigger after each update?

View 1 Replies View Related

Pc Installs By Itself Disc Drive A?

Mar 2, 2012

my pc installs by itself disc drive a, i uninstall it but when i'm running again my pc installs it back! i have windows 7 64.

View 5 Replies View Related

How Many Installs On OEM Windows 7 Sisc?

Dec 5, 2012

I recently acquired a Windows 7 Home Premium OEM system builder cd and key from a friend who owns a computer shop. how many installs can I do with this? I wanted to install on my PC as well as 3 other PC's.

View 12 Replies View Related

Ethernet Driver Installs, But Not Properly?

Aug 10, 2011

recently I downloaded and installed Spybot S&D, MBAM, and Comodo firewall on a computer of mine and shortly after(1 or 2 days) My Internet connection ceased. I assumed it was something Comodo was blocking so I tried disabling it and then un-installing it and neither changed anything. I tried pinging www.google.com and it failed. I tried pinging my router and it worked. and I tried having my router ping www.google.com and that worked. I also checked the device manager to see if anything was odd and I had a yellow "!" for my ethernet controller. So I whip out the cd for my motherboard and reinstall it and it is successful. I check the connection to the web and it fails. When I check the device manager it still shows a yellow "!" for the ethernet controller. I tried getting the latest set of drivers for my motherboard on another computer and the same results. My motherboard is a gigabyte GA-M57SLI-S4 nvidia nForce 570 sli. It has a Nvidia nForce 10/100/1000 MBPS ethernet on-board adapter.

There are two entries in my device manager: ethernet controller (which has the "!") and nvidia nForce 10/100/1000 mbps ethernet (which displays fine in the device manager) The current driver package I am trying to install is this link. That is what nVidias drop down boxes give me when I enter in my information.I found some forums of people with similar issues but all the solutions tell them to use the device manager's tools to update the drivers but I haven't had any luck with that so far. I may be doing it wrong because those options never seem to work for me. Does anyone have any ideas on what can be going on here?I'm running windows 7 x64 and a AMD Phenom x4 quad core 2.2GHz

View 5 Replies View Related

Disabling App Installs With Windows 7 Home?

Oct 7, 2010

Finally took the plunge and got a 3 pack Windows 7 Home.

I've done searches in google and on the forums and everything points me to Local Policy (which I have done for years with XPPro), which Home doesn't have.

I read about Parental control, problem is, I need to disable my wife/in laws from installing apps and from what I read that doesn't really prevent them from installing apps anyways.

Is there anyway to do it in Home edition? Not really concerned with wife/in laws as much as I am with kids. Although they only have access to Miniclip and handful of other sites, some of these apps/links/download/installs can get nasty.

Also I've been using ProCon for Mozilla site control with WinXP Pro. Should I stick with that or does Windows 7 offer anything new as far as website access. I simply need to define which sites kids can access.

View 9 Replies View Related

Does Dell Upgrade Kit Allow Clean Installs ?

Sep 28, 2009

I am thinking of buying a laptop through dell and get the windows 7 upgrade kit sent at a later date. But I only want to do this if it will allow me a clean install, as I never do in place upgrades for obvious reasons. Does anybody know if Dell upgrade kit allows this?

(I know... I know... I should just wait... but I have time constraints beyond my control!)

View 1 Replies View Related

Privilege Problem With HP And Other Software Installs

Oct 24, 2009

OK. Clean new install. Only users on the system are default Administrator and myself) as admin. Tried to run HP driver setup (which stinks anyway) and it gets to a step where it says I needed to run it as administrator. But I am one. If I start it with "Run as Administrator" it still fails. If I run it with the hidden administrator account I get the same problem. If I change the UAC to allow everything, I still get it. I had a similar problem trying to install Nero. It seems like I am an admin, but I'm not really. Other stuff (Office 2007) installed fine.

View 2 Replies View Related

Finding Out Number Of Remaining Installs On A Key

Mar 9, 2012

I just started a job doing desktop support, mostly for medical records software. My boss is out and I am to install office 2010 professional plus on a few different peoples computers and do not want to look stupid if one doesn't work. We have already installed it on multiple computers. I believe it is a volume liscense.is there a way I can run the key to see how many installs are left on that key?

View 9 Replies View Related

Delete Files And Installs On Shutdown?

Nov 30, 2011

a university I attend on Saturdays has a setup on their computers that deletes all files that were added to the computer (as in anywhere) and any new installs, but without deleting stuff the university wants to keep, like Firefox, UConnect, Adobe Flash, etc. And it has an exception on the My Documents folder that things added to the My Documents folder will be kept on there for 14 days, then automatically deleted. And the computer deletes all this stuff once it shuts down. When you turn it back on, nothing of the stuff added is there and looks like a fresh new install of Windows 7 with Firefox and all that sort of stuff kept.I've been googling and binging for how to do this, but no successNot sure if it's a program or a script.Just want to delete everything besides stuff I want to keep like Firefox, Microsoft Security Essentials, Adobe Flash, Shockwave, etc (and possibly make an exception for the My Documents folder as well)

View 5 Replies View Related

Back Up Programs With Limited Installs?

Apr 27, 2011

I'm not sure if this is the best category/sub-category, but it seemed like the best option.

I've got two programs - Photoshop Elements 9 and the latest Microsoft Office - that restrict the number of installs. I was told that MS Office allows 3 and Adobe only allows 2.

I have heard that there is a way to back up a program such that if you had to reformat, you could retrieve the program - and so not need to do a reinstall.

Is this true? If so, does anyone know how to do it, either the steps I'd need to take or the program I would need to get?

View 6 Replies View Related

OS Deals That Allow For Multiple OS Installs Off Of One Disc?

Jul 18, 2011

Are there in OS deals that allow for multiple OS installs off of one disc?

View 3 Replies View Related

All Installs Hang At Status Phase?

Feb 3, 2013

I have no idea what caused all of this to start happening. Maybe force quitting an install? I tried Googling the problem but every fix I tried didn't work; I don't think I've found my exact problem yet. I tried restarting, looking in the services (it wasn't able to be shut down, msiexec or something?), and using the Windows system scan. The Windows System Restore hangs too - so I couldn't do that either. Installers that failedEvery one that I have tried since it first started - Nvidia graphics drivers, windows 7 tools, uninstallers, etc. Windows 7 x64 UltimateIntel i7 3770kMSI GeForce GTX 670 Power EditionCorsair Vengeance 1600MHz 8GB x 2ASRock z77 Extreme 4Corsair 750 Watt Gold + Certified PSUOCZ Vertex 4 256GB SSDSeagate Barracuda 2TB HDD

View 1 Replies View Related

Card Installs As Standard VGA Adapter

Feb 12, 2013

I had Windows 7 64 bits and it was everything fine, but I have some programs that require drivers, and there isn't a driver for 64 bits. So I tried installing the Windows 7 32 bits version.Everything was working fine, until I found out that my video card isn't being recognized anymore, and it's being showed as "Standard VGA Adaptor". I searched and found out some people with the same problem. Most people advised them to update drivers, but that didn't work with me.The following error ocurrs when I try running the stup.exe which should update my video card's driver: "The NVIDIA setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit."The thing is, I tried unistalling the "Standard VGA Adaptor" driver, but it requeires me to reboot, and when it reboots the drivers are automaically reinstalled. I also tried reinstalling Windows 7 32 bits, didn't work. Tried reinstalling Windows 7 64 bits, didn't work.

View 2 Replies View Related

Override Best Driver Installs Older Version

Dec 1, 2011

I am trying to upgrade my Atheros wireless driver but I get the "best driver is installed. I have uninstalled the device and driver, tried a manual driver install. Each time it tells me it installed the old driver and will not let me install the new drver. How can I stop the automatic the automatic install of the old driver.

View 4 Replies View Related

64-bit Software Installs In (x86) Program Files Folder?

Jun 7, 2011

I'm new to the forum, just signed up.I have a few questions about installing software on 64-bit.I am running windows 7 ultimate 64-bit and noticed some thing.Some of the software are installed in the program file (x86) folder, some of them in the program files folder by default.I made sure that i found and install 64-bit compliant software.

1. Why are 64-bit apps being installed in the (x86) program files folder when they are in fact 32/64-bit versions?

2. When i get prompted to choose the destination folder, can i manually select the program files folder and will it change or compromise windows?

View 5 Replies View Related

Bootmgr Is Missing Recurring After Fresh Installs?

Aug 7, 2012

I recently purchased a new OCZ 64GB SSD to install Windows 7 64 bit on. I have a separate 500 GB HDD for storage, but I completely disconnect this drive when doing my install because the Windows 7 install disk will not recognize my SSD if it's not the only drive plugged in.

After installing Windows everything works fine for a time. I am able to reboot multiple times during the windows update process (btw this is a possible culprit for the issue that is occuring) up until the first 5 security updates for Sevice Pack 1. After installing these updates and shutting down my PC will not boot up and I get the bootmgr is missing error. I have at this point hooked my HDD back up, but it is well after my Windows install has finished, so there doesn't seem to be any way that Windows is writing the bootmgr file to my HDD because I have booted up multiple times with neither the windows install disk in the dvd drive nor the HDD plugged in.

I'm trying to figure out if something's wrong with my SSD or if there's some update in Windows 7 sevice pack 1 that is incompatible with my hardware.

View 2 Replies View Related

Windows 7 X32 Only Recognizes 4Gigs Of The 6Gigs Installs?

May 15, 2011

I am running Windows 7 on a system I built myself about 18 months ago. I recently added 4Gigs of RAM to the existing 2Gigs.Occasionally I get an error message about being out of memory. It during one such episode that I discovered that only 4Gigs of RAM is actually being used.I've only know about this site for a week or so or I would have been able to give you more specific information

View 4 Replies View Related

Multiple Crashes On Several Installs. Ntoskrnl.exe And Hal.dll 0x109

Jul 23, 2012

I built a computer back in May...a few weeks later I started getting BSODs. They don't happen all too often, about 1 or 2 times per week.After trying to google the issue, they suggested running memtest - no errors, driver verifier found nothing, etc. So I re-installed windows, the same thing happened, I re-installed windows again, still get a blue screen every once in awhile.Then I noticed my power supply started making a humming noise, I ignored it, then one day it sparked and died. I thought that was the cause of all my issues until I replaced it with a temporary one and a few days later got another blue screen.It's always either ntoskrnl.exe or hal.dll, I didn't keep all the crash dumps from my previous installs.

View 3 Replies View Related

New Windows 7 Rig Freezes During Downloads, Installs, Updates?

Sep 23, 2012

I will start by saying I built the machine myself and originally I thought it was a ram stick, found one that I took out and the freezing stopped but it was the coincidence. It will freeze sometimes within 5 minutes or 1 hour. It is seemingly random. It will freeze with the full 16gb of ram and when i take out the stick with 12gb as well, and I figure its not the ram anymore and thats why I turn to you. I think it may be a software bug or something thats not installed.I have tried to install all the drivers that are out and the freezing happens sometimes when i go to install a program, download a driver, download a torrent, it seems during processes it just stops, screen locks up and it needs to be re-booted.Cant alt-tab, cant alt+ctrl+del or anything.Is there a program I can run to check everything? or a log or screenshots of a file or anything that you guys could use to diagnose? I'll get you anything you need, its frustrating that such a beautiful machine is freezing Also another thing that makes me think that its software rather than hardware is the fact that when i try to install windows updates they fail with an error 800B0100 and I have tried resetting the updater and running Microsoft tools and troubleshooters, nothings working[CODE]

View 1 Replies View Related

Removing Incomplete Vista Installs Form HD

Feb 2, 2013

In the act of trying to get my Velocity computer up and running (new P.S.U. and CDRom Drive) from a power spike at home I loaded 3 copies of Vista on the HD as I figgled with the BIOS boot order. To make a long story short: I was not able to get the system to boot and correctly complete the install of Vista and then Windows 7 (got a Windows upgrade disk with the machine years ago and had it, Win.7 running after the first week.). Now I have 3 incomplete installs of Vista sitting on the HD and I would like to get them off so I can make room for better things.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved