HP Photosmart Printer Is Not Properly Compatible When Networked
I'm using Windows 7 beta 64-bit. I have a Photosmart 2575 All-in-One, and when connected over the network installing the drivers is difficult. Windows can see it on the network, but cannot automatically install it and shows you the list of drivers Windows can install. The 2500 series driver is not there.
I tried using HP's installer for Vista 64-bit, and all seemed to go well until the installation tried to detect the printer on the network and failed.
So, I tried again to install it using Windows and chose the 2600 series driver and everything appears to work. Even so, something is wrong since the HP installer won't work and the printer isn't really a 2600 series.
View Replies (Posted: Sunday, February 01, 2009 5:04 AM)
Sponsored Links:
Related Forum Messages for Windows 7:
Still Not Able To Print On Networked Printer
Computer #1 - Dual boots with XP Pro SP3 and Windows 7 RC1 7100 with Konica Monolta 2400W printer attached via USB and shared. Computer #2 - Windows XP Pro SP3. Computer #2 Sucessfully installed networked printer and prints normally when Computer #1 is booted to XP. When computer #1 is booted to Windows 7 it automatically detects and installs networked printer once network was correctly setup but gets error message when trying to print.
Posted: 05-09-2009
View 8 Replies!
View Related
Networked Printer Not Printing Unless Restart Spooling
I have a Windows 7 x64 RC.7100 build installed and have configured my HP printer using Vista x64 drivers, it prints locally just fine. However I tried to setup printer sharing with my x32 Windows XP laptop and have an issue that is really a pain. Whenever I print from the XP machine I get the print job in the queue on the Win 7 machine, but it just says printing for an infinite amount of time. I have to either restart my Windows 7 machine or go into Services and Print Spooling and Restart Service for the print job to complete. I found a similar error/problem with Vista but all of the suggestions did not help. The only thing I can think of is that there is some driver incompatibility, but HP states on their website that they wont have "official drivers" for Windows 7 until Oct 22.
Posted: 08-09-2009
View 5 Replies!
View Related
HP Photosmart A536 Printer
I'm having trouble installing a driver for this printer. I've tried to run the setup file I obtained from HP in any type of compatibility mode and it still won't go into the setup mode for the driver. Any suggestions?
Posted: 03-19-2009
View 2 Replies!
View Related
HP Photosmart Printer Software
The HP Solution Center software that comes with the printer do NOT work in Windows 7. The scanner function is unusable, but the printer function seems to work as usual. Checked the HP web site for drivers/software patches, but there were none.
Posted: Friday, May 08, 2009 3:54 PM
View 8 Replies!
View Related
HP Photosmart C7250 Printer
I've read all the other threads in reference to printer problems but to no avail. I have tried ALL of the trouble shooting and followed them out. The printer worked right after win 7 install but then decided that it did no longer would converse. The HP side of things stated that it did not recognize the operating system. I have tried updating drivers and firmware which didn't work. I tried using the Windows wizard which was going well until I tried to print a test page. Nothing printed.
Posted: Wednesday, July 08, 2009 7:50 PM
View 3 Replies!
View Related
HP Photosmart 2575 Printer Driver
I began to add programs and printers and when I added my HP Photosmart 2575 and then its Vista drivers. I then made another backup of the what I had added to that point. I now get a 9F stop on shutting down after I have done something with the printer as simple as printing a page. I restored to the original installation and added the Photosmart using only the RC's driver. All is well under that setup and would like to go back to the second backup and uninstall the Vista drivers and use the RC's drivers but can't find any way to roll back the driver to RC one. If I try 'New Driver', the system seems only to find the Vista driver. How can I delete the Vista driver from my system so that I have only the RC drivers?
Posted: 07-03-2009
View 2 Replies!
View Related
Drivers For HP Photosmart P1000 Printer
The only problems I have had so far with Windows 7 RC Build 7100 is trying to get my printer to work. I finally got the Photosmart a522 to work by installing the driver in Vista compatability mode. I have tried with the P1000 in XPÂ and Vista Mode but none works. WIndows 7 recognizes the printer and even installs the printer but it will not print. The printer is connected with a USB cable. To try it as a parallel printer. I will bring a cable home tomorrow and try that. It has always worked on USB Though. Any further ideas?
Posted: Monday, August 10, 2009 1:38 AM
View 2 Replies!
View Related
HP Photosmart C6380 Printer And Scanner
I have a HPC6380 with wireless connection. It worked with Win 7 Beta. Now I tried to install the newest version of HP drivers:Â "PS_AIO_04_C6300_Net_Full_Win_ita_120_216_NB.exe" but ther's no way to start with their installation. The PC simply refuses to install. My laptop is a HP Pavillon dv6700
Posted: Friday, May 15, 2009 7:42 PM
View 1 Replies!
View Related
HP Photosmart C4500 Printer Driver
I have tried to install the HP Photosmart C4585 Wireless Printer to my laptop, while Windows 7 has a driver it seems that the Printer cannot be found even after it is installed using the installation wizard. Is this just because I am using the release candidate or is it a greater problem that needs to be addressed prior to the final release? I have not tried attaching the USB cable to the laptop as that would defeat the purpose of the trial.
Posted: Thursday, July 16, 2009 3:27 PM
View 2 Replies!
View Related
HP Photosmart C6150 Printer Problem
My HP Photosmart C6150 printer is hooked up to our computers via wireless connection to the Linksys router. After adding the printer to either of our Windows 7 computers, we can only print for about 24 hours before the printer goes offline and will not print any documents in queue. How do I make it so the printer stays connected to the computer for more than a day or so? Here's the specs of our computers: Computer 1 (my mom's computer): HP Pavilion case AMD Athlon 64 X2 5000+ 2.66 GHz Stock CPU cooling Asus M2N68LA motherboard 2x1 GB DDR2 667 Dual Channel RAM (not sure of what brand) Seagate Barracuda 7200RPM 500GB hard drive Lite-On Lightscribe DVD burner Lite-On DVD-ROM drive KFA2 GeForce 9600GT OC Thermaltake Purepower 500w PSU Computer 2 (my computer): Cooler Master Storm Sniper case Intel Core i7 920 2.66 GHz (Often running at 4.2 GHz) Xigmatek Dark Knight S1283V CPU cooler with OCZ Freeze thermal grease Corsair Dominator 3x1 GB DDR3 1600 Triple Channel RAM Western Digital Caviar Black 7200RPM 1TB Hard Drive 2x Sony Optiarc Lightscribe DVD Burner EVGA X58 3X SLI motherboard EVGA Geforce GTX 285 1024 MB Corsair HX1000W PSU Super Talent INTAIN1MCR Media Card Reader
Posted: 06-21-2009 at 11:21:20 PM
View 14 Replies!
View Related
HP Photosmart C7250 Printer Problem
I have a HP Photosmart Wireless C7250 all-in-one printer that currently runs on my vista Ultimate 32 bit with no problems, but it will not install on Windows 7. The cd that comes with the printer is for XP and Vista yet Windows 7 tell me it is onley for XP. I don't understand and I know that this is still Beta but this is one thing you could look into.
Posted: Friday, May 29, 2009 1:41 PM
View 2 Replies!
View Related
HP Photosmart B9180 Vista Printer Drivers
The Vista drivers for the HP Photosmart 9180 printer do not work under Windows 7. When you try to install the drivers, the installer aborts because it says it is compatible only with Vista and it has detected you're not running Vista.
Posted: Sunday, January 11, 2009 2:06 AM
View 6 Replies!
View Related
Compatibility With HP 3310 Photosmart Printer / Scanner / Fax
I have a HP Photosmart 3310 all in one printer / scanner / fax. Since downloading the Windows 7 RC, the printer (networked through a Netgear modem / router) has stopped working (printing) on all three networked computers. I have tried reinstalling the HP software (which does not work fully with the Windows 7 RC) but this does not work. Tried all the usual steps of turning printer on and off, swapping Ethernet cables around in the back of the netgear. Comparability between the Win 7 and the printer seems to be the problem. Have downloaded the HP software for Windows Vista.
Posted: Thursday, June 11, 2009 2:00 PM
View 1 Replies!
View Related
HP Photosmart 3210 AIO Scanner / Printer Via Network
HP Photosmart 3210 AIO scanner/printer via network - found but not connected. I searched the forum and did not find mention of this specific All-in-One printer/scanner. Mine is connected to the same router and my pc and and using the 32-bit Vista drivers and 32-bit Win7 RC 7100. I go through setup and my printer is found by the driver but then I get the error - "Device Setup has failed to complete" Has anyone found a solution to this issue?
Posted: Monday, May 18, 2009 3:59 AM
View 9 Replies!
View Related
Printer HP Photosmart C6180 Doesn't Print
Today I wanted to print out something for school, but when I do, the printing task quickly appears and disappears in the printing-task-list. Here are some detailed Information from the Eventlog: Protokollname: Microsoft-Windows-PrintService/Admin Quelle: Microsoft-Windows-PrintService Datum: 04.11.2009 00:11:19 Ereignis-ID: 372 Aufgabenkategorie:Ein Dokument wird gedruckt Ebene: Fehler Schlüsselwörter:Klassisches Spoolerereignis,Dokumentdruckauftrag Benutzer: andre-laptopAndre Computer: andre-laptop Beschreibung: Das Dokument Microsoft Word - CV.docx im Besitz von Andre konnte nicht auf dem Drucker HP Photosmart C6100 series gedruckt werden. Versuchen Sie erneut, das Dokument zu drucken, oder starten Sie den Druckspooler erneut. Datentyp: NT EMF 1.008. Größe der Spooldatei in Bytes: 145984. Anzahl der gedruckten Bytes: 0. Gesamtanzahl der Seiten des Dokuments: 2. Anzahl der gedruckten Seiten: 0. Clientcomputer: \ANDRE-LAPTOP. Vom Druckprozessor zurückgegebener Win32-Fehlercode: 2147500037. Unbekannter Fehler
Posted: Tuesday, November 03, 2009 11:20 PM
View 4 Replies!
View Related
HPÂ Photosmart P1000 Printer Driver Problems
I have an HPÂ Photosmart P1000 printer, which alas no longer seems to be supported by Windows 7. However, I have read that the HP DeskJet 940c driver is compatible. This is not listed under "add printer", but I understand that all I need to do is run "windows update" from the printer installation process. So far, so good. Unfortunately, I repeatedly get "Windows was unable to get a list of devices from Windows Update. Please try again later". Well there was one occasion when it DID work, and I saw the HP 940c listed, but unfortunately was sitting at another computer on my home network (also running W7RC1)Â at the time. Since then, I have failed on both computers to update my printer driver list. HP are no help. Their website tells me to download the drivers from Windows Update, so I am stuck. On principle, I refuse to buy a new printer, even though I've now spent hours on this!
Posted: Thursday, August 06, 2009 2:47 PM
View 3 Replies!
View Related
Epson Stylus Photo RX585 Printer Not Compatible
I had problems with PC shutting down after installing W7. After lots of troubleshooting removing apps and drivers and trial and error, it seems the problem lies with the epson stylus photo RX585 printer. If the printer is left switched on when you try to shutdown the PC, the system just hangs but if the printer is switched off before you try shut down it works great. I am using the driver that was supplied with W7. I tried Epson's own x64 driver but I had the same problems with that as well. Does anyone else have the same problem or possible fix for this .
Posted: Thursday, May 07, 2009 3:28 PM
View 3 Replies!
View Related
No Access To Networked Xp Computers
I have upgraded my vista home premium to Win 7. I now cannot access the Xp computers on my home network but I can access my other Vista computers ok. I can ping all by ip and name ok. But file access just comes up with error 0x80070035 'the network path was not found'. All the computers can access the Windows 7 computer and read files ok. All the computers are on the same workgroup, Nothing been changed on any other computer as it all worked before this upgrade! Tried disabling the firewall, set to Home network, no homegroup set. The original vista drive which I 'ghosted' before I upgraded to 7 still works with full access to all networked computers.
Posted: 05-10-2009
View 7 Replies!
View Related
Cant Access All Networked Machines
I am running the 7100 RC Build and when I go to network it shows all my machines. One of these is a media streamer (HDX 1000). I can access all machines by double clicking on them however when I do that with the HDX it times out and says HDX is inaccessible. I am using "home" network but not joined a homegroup. Network discovery is on. File sharing on. Contrlled by username and password NOT by homegroup. I also think I have it set to send LT and NTLM ntlm v2 is applicable in the local security policies. The windows 7 machine has a static ip set. I should also not I can ftp into the HDX and I can ping it and get replies. UNC path in explorer bar does not work either nor can I map any of the shared folders on it. Any ideas?
Posted: 05-11-2009
View 5 Replies!
View Related
Can't Print From Networked Computers
I have 2 laptops and a desktop. All of them are now running Windows 7. I am unable to print from either of the laptops. I have set up my Home Group and made sure each computer has the same password. The HP printer I have is connected via USB port to the desktop. I can print from the desktop. When I try to print from either of the laptops it does not print. Please help-is their a sequence of things I should check on each computer?
Posted: 10-29-2009
View 9 Replies!
View Related
|
TRACKER
