Epson NX400 Scanner Driver Won't Install
Tried installing the scanner both from the installation CD and updated Vista 64bit drivers, and I get an error asking me to restart and try again. After restart same problem happens. Printer drivers install fine, it's just the scanner drivers. Called Epson and they have no beta drivers for Windows 7. Anybody know of a work-around? If I can't find a solution soon, i may have to go back to Vista...
View Replies (Posted: Thursday, January 22, 2009 7:31 PM)
Sponsored Links:
Related Forum Messages for Windows 7:
Canon LiDE 50 Scanner Won't Install
I have just installed Windows 7 64 bit dual booting with Windows Vista 32 bit. I can't get drivers for my Canon CanoScan LiDE 50 Scanner to install on Windows 7 (works fine on Vista) See on the Canon Website that they are not showing any Windows 7 drivers for this scanner which I can't get to work. Tried LiDE 60 drivers but could not get these to install with my scanner. Is there anything I can do to get this working. Or do I have to reboot Vista if I want to continue using this scanner?
Posted: 10-27-2009
View 9 Replies!
View Related
Epson RX500 Won't Print
Since installing Windows7 over vista last week, my EpsonStylus Photo RX500 will not work. I followed someones advice on reinstalling it completely but that didn't work. I downloaded new drivers but when I run the printer software I get the following error message - "Epson does not recognize the OS. Epson PhotoStarter is not compatible with operating systems earlier than Windows 98. Installation was canceled." I have no idea why it would refer to an earlier version of windows?? I'm totally lost and need help,PLEASE? Is there anyone out there who can send me a step-by-step on how to correct this?
Posted: 10-28-2009 at 06:28:25 PM
View 6 Replies!
View Related
ATI Driver Won't Install
I have a Toshiba Satellite Laptop and I installed Windows 7 Build 7100 on it. However, Open GL games do not work, and I have the ATI 8.56 graphics driver installed and I am trying to upgrade it to the latest 8.61. However, after I run the installer, my screen does not blink and once installation is complete, I do not see a change in the driver version - and catalyst is not installed as well. However, when i am trying to re-install it says the drivers are already installed. Any ideas as to whats going wrong? Its a 32-bit OS. I cannot run any OpenGL games, they fail saying it could not load OpenGL.
Posted: 05-05-2009
View 1 Replies!
View Related
Epson 2450 Scanner Driver
I have an Epson 2450 scanner. There is a 32 bit (but not 64 bit) vista driver, and xp drivers. I'm running W7E/64. W7 won't install any of the epson drivers. I was hoping XP mode would allow me to use the scanner in the VM. So far, no luck. I can install the XP drivers in the VM, but I can't attach the device on the USB menu (it lists it and says "attach", but it doesn't attach). My understanding of XP mode was it existed to provide compatibility for devices for which there was no workable W7 driver. Is this incorrect?
Posted: Saturday, October 10, 2009 8:22 PM
View 6 Replies!
View Related
Epson GT 7000 Scanner 64 Bit Driver
have installed Win7 (64bit) a few days ago and -of course- have the same problems. For example I have an Epson GT7000 scanner. No drivers are available from Epson and I don't expect them to write one as the scanner is too old for this. Simmilar problems will cause a lot of fully working hardware to be thrown. It might benefit the economy but is hardly environmentally acceptable. My current sollution is to run Win7 in XP mode, scan there, then open the files in win7 & photoshop. It is of course far less conveniant than calling a Twain driver out of photoshop directly. Unfortunately this is not the only problem I have. For example I can't get a network printer server driver. So to print I have to switch on a second computer running Windows XP, which shares the networked printer...  My question: Is it possible to install just drivers in XP mode and access them via Win7 dirctly (Some sort of XP driver mode)? It would be far more efficient to make Win7 backwards compatible than asking all device manufacturers to write new drivers.
Posted: Tuesday, October 27, 2009 7:17 AM
View 2 Replies!
View Related
Matrox Win 7(x64) Display Driver Won't Install
I'm having problems installing my Matrox driver on windows 7(x64) version. I've been using the 32bit version of windows 7, and i managed to get the matrox driver installed no problem. (i used the windows compatibility mode) I've tried the same method again (Windows compatibility mode) and downloaded the Vista(x64) version of the driver. It suggests the right diver to install but then says i have an incompatible version of windows. I have read up on the problem, and i have seen suggestions to check that the device ID is listed in the display drivers .inf file. I've checked that and my device ID does exsist in the driver .inf file. So now i'm stumped, is there another way to install my driver? Does anyone have any suggestions as to why my driver won't install.
Posted: Wednesday, September 02, 2009 4:30 PM
View 4 Replies!
View Related
XP And 7 Install Issues (Won't Boot Into Win 7 Install)
I have XP SP2 installed. I used EASEUS Partition Master to split my drive in half, one half being XP, the other half being a future install of Windows 7. Put DVD in, selected the blank partition, began the install. Once it gets to the first reboot, it will reboot and go straight into XP. There is no option to choose Windows 7. The XP boot.ini has only one entry for XP. Does anyone have any suggestions? I'm thinking I need to add an entry for Windows 7, but have no clue what to put and I'm also guessing I'd have to add a few special tags because it's booting into the setup process of Win 7.
Posted: 11-01-2009
View 7 Replies!
View Related
All Programs Won't Display And Speech Recognition Won't Start
My speech recogntiion won't start. I don't have a system restore that far back, but it hasn't been working since 3, maybe 4 updates back and I am now just getting around to it, since I have had other concerns lately. The error I get is "Speech recognition could not start because the language configuration is not supported. The recognizer language must match the language of the user interface. Please change the recognizer language in the Speech Recognition control panel under Advanced Options." I go there and press certain buttons and I sometimes get the error message "The requested task can not be carried out because the neccesary engine can not be created. Please select a different engine and/or audio device." I have tried changing the laguage and then restarting and it still won't work. I am using the same mic I was using before when it worked. I have not installed any new sound drivers when it stopped although I have looked for the sound drivers since and there are no new ones. I also had two other problems after the same Windows 7 update with the All Programs not displaying in the Start Menu, but I have dont a temporary fix with that, but it is still not working the way it is supposed to as I had to make a new sub folder in the Programs folder and change the location to that folder every time I start up Windows and so now I go into All Programs and then a second folder, which is ok for now, gonna write a batch file to do it for me anyway. The other problem is that my sidebar wouldn't start, but I think I fixed that last night. As my gadgets are now working.
Posted: Sunday, August 16, 2009 11:05 PM
View 5 Replies!
View Related
Epson V500 Scanner
 I anyone has successfully installed and used this scanner with Windows 7 x64, could they please advise me how to do that? I have downloaded the Epson V500 drivers for Vista x64 and installed with Vista compatibility mode set and "Run as Administrator". Goes through the motions and claims installed OK but when I connect the scanner USB the drivers cannot be found.
Posted: Friday, January 16, 2009 9:41 PM
View 9 Replies!
View Related
Epson 3200 Scanner
I am running X64 and have had no driver problems except for my Epson 3200 scanner. i know this is getting a bit old like myself but has anyone had any luck running it or a workaround?
Posted: Tuesday, February 03, 2009 10:17 AM
View 8 Replies!
View Related
Network HP Printer Won't Install
Trying to install an HP 2100 tn printer through a Linksys router to a Win 7 62 Pro machine. Win 7 drivers for Asus MB, Marvell Card and latest firmware for Linksys router. Tried Win 7 printer installation routines a jillion times...and it couldn't find the printer (power cycled router and printer several times). Used HP latest network diagnostic but it can't find the printer. Used latest PCL 5, 6 and PS drivers from HP - nothing. Used netsniffer with HP diagnostic and it looks like the diagnostic sees the printer (reports the correct i.p. address) but doesn't identify it as a printer. Went back to XP where the printer works and found it is currently working with IPX protocol. Anyone have any ideas? I don't want to buy a new printer, or stick with XP.
Posted: 2 Weeks Ago
View 9 Replies!
View Related
Epson 4180 Scanner Drivers
Has anybody been able to get a Epson 4810 Perfection Photo Scanner to work in Win 7? I have it working in Vista Ultimate 64 bit, but not in win 7. I have tried using theTroubleshooter and installing under different compatabilaty settings. The drivers will not install. I emailed Epson, who told me Win 7 was still in beta and they'd have drivers when it went RTM.
Posted: Friday, January 16, 2009 12:08 AM
View 3 Replies!
View Related
Epson Scanner Perfection 1260
does anyone know how to get the epson scanner perfection 1260 working on the 7 beta. Windows recognizes the scanner but does not have any drivers. I have tried various drivers from the Epson website but none of these solve the problem. The device is marked as no drivers in device manager. Even uninstalling it and loading drivers in different power on sequences of the device does not help. I am running the 64 bit version of the beta. The scanner works ok in vista ultimate.
Posted: Saturday, January 17, 2009 12:16 PM
View 9 Replies!
View Related
Epson Perfection 1640SU Scanner
Has anyone got this to work with Windows7 64 bit (or 32 bit come to that)? It is not recognized by Plug & play, no driver on Epson site that I can find and original disc says that 'this operating system is not supported' It is working fine on Vista 32bit
Posted: Tuesday, May 12, 2009 10:59 AM
View 7 Replies!
View Related
Epson Workforce 600 Scanner
The printer drivers for the Epson Workforce install just fine, but the Scanning software won't install in the 64-bit version of the Win7 beta. Get an error near the start of the install. Has anyone had any luck installing this, or is anyone using this?
Posted: Thursday, January 15, 2009 5:29 PM
View 2 Replies!
View Related
Epson 2580 Scanner Twain
W7 RC 64bit. Haven't been able to us my Epaon Prefection 2580 Scanner, either native or XP mode. Has anyone had success with this scanner? Are their generic W7 64 twain drivers.
Posted: 09-15-2009 at 01:28:52 AM
View 1 Replies!
View Related
Epson Perfection 3490 Scanner
I have the scanner to which is the title of this post this is the only peripheral I cannot seem to get to work on windows 7 has anyone one any ideas please as Epson have not got any drivers that support this scanner for windows 7.
Posted: 03-30-2009
View 2 Replies!
View Related
Sigmatel Audio Drivers Won't Install
Have a tablet PC that I just installed Seven onto. Even though it's an old box, Windows update found nearly all of the drivers. The one it didn't find is for the AC97 Sigmatel audio. So, I grabbed the drivers I used for Vista (they're actually XP drivers) and tried to install them. Did this again and again, using different compatibility modes every time. Got no indications of failure, but never worked, either. Tried removing the device and having Windows Update search for a driver. No luck. Tried installing driver from selecting from list. Only Sigmatel driver in the list is for HD -- which I don't have. Even tried the MS WDM driver -- and it refused to install it. I read in another thread that there are supposedly generic AC97 drivers --but I can't figure out how to install them. The relevant driver files from Vista are STAC97.sys and staco.dll -- which tells me this is a STACS AC97 audio chip. But I just can't figure out how to get a driver installed.
Posted: 06-24-2009
View 7 Replies!
View Related
Conexant AC-Link Drivers Won't Install
I have a HP Pavilion zv600 (model zv6123cl). The drivers section for my computer on HP.com only lists XP drivers, which fail to install. The Vista section (http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=500261&lc=en&cc=us&dlc=en&lang=en&cc=us&y=6&x=8) only has drivers for the quick launch buttons. I've also downloaded the package suggested at http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/f4dfec8a-e2c9-44b0-ac8b-f8dcfe80ab4a, but these also fail, even when checked for running as admin in Vista compatibility mode. Windows Update doesn't have any downloads. Device manager lists the device as "Muiltimedia Audio Controller", with the little exclamation point. Does anyone have any other drivers for the Conexant CX20468-31 AC97 Audio that might work with Windows 7?
Posted: Friday, January 30, 2009 1:44 PM
View 2 Replies!
View Related
Adobe Flash Won't Install In Firefox 3
Have read previous threads on Flash, and made sure I'm the administrator: my first name (Barend) is shown as administrator. Still, I am often getting the msg "Page can only be viewed with Flash player- Install?". Instead of installing I only get the option to download. Starting the download first leads to failure, then the W7 msg "Do you want to start with the approriate settings?" and then I can choose between IE and Firefox. But it still doesn't install correctly, because empty pages and the msg as in line 2 keeps appearing.
Posted: Saturday, May 16, 2009 10:54 AM
View 5 Replies!
View Related
South Bridge Drivers Won't Install
I just built desktop with ASUS M4A78 Plus mobo and was getting BSODs constantly using windows 7 64-bit. I just installed XP 32-bit and ti's running fine. One thing I noticed is on XP the south bridge drivers installed but on Windows 7 whenever I tried to install them using catalyst manager or driver from ATI's site it would not install. It would attempt to install the north bridge drivers which the log would say successful but catalyst manger would always say they weren't installed. Has anyone experienced this problem or now a fix for it?
Posted: 01-07-2010 at 05:05:16 PM
View 2 Replies!
View Related
|
TRACKER
