-Computer 1 sees Computer 2 and 3 just fine. Can browse the folders they have shared, etc.
-Computer 3 sees Computer 1 and 2 just fine. Can browse the folders they have shared, etc.
-Computer 2 sees Computer 1 just fine. Computer seems to be somewhat aware of Computer 3 (it sees it as a media device for viewing pictures/video/whatever) but it does not see it under the Computer list in Network. In other words, it can't navigate to it and browse its folders.
I've messed with everything on Computer 3 I could possibly think of. There was never at any point an option to select who had access to what, specifically. I simply told it to give full permissions to "EVERYONE" which I would assume is everyone on the network.Firewall is off on all three computers.
-Sharing and discovery is on on all three computers.
-File and Printer sharing is on on all three computers.
-Public folder sharing is on on all three computers.
It can't be a "64-bit and 32-bit can't talk" issue since Computer 1 sees and is seen by Computer 3 just fine.It can't be a "wireless and wired can't talk" issue since Computer 1 sees and is seen by Computer 3 just fine.
i run win 7 ultimate 64 and in Network ID, when i change the initial setting (this computer is part of a business network) to: this is a home computer, and prompts me to restart, the system reverts to the first setting (business network). I ve done this procedure many times, even in safe mode but the problem persists.
I have been having this issue on and off for a while now. We have 2 windows 7 computers. Network discovery is on and password protection is off. The folders necessary are shared, but when I try to connect to the computer on the network it asks me for a unsername and password. however, if the other computer tries to connect to mine, they get in no problem. We've tried a homegroup and I can't see any of the files in the folders.. I have read and read on the forums and tried everything I could..
I have a Windows 7 x64 media PC with a InfiniTV 4 tuner in my living room. In my bedroom I have another TV hooked up to another PC (currently running Vista Business but that's probably about to change...). What would be the best way to get the bedroom setup to behave as close as possible to a normal TV with a cable box by controlling and streaming video from the tuner card in the "main" media pc in the living room? Does media center have anything like this natively? I'm open to solutions that skip the second PC too if there's some magical ethernet based KVM switch that can just pipe everything up to the bedroom...I've been eyeing Orb for a little bit but it looks clunky to use, admittedly I haven't tried it yet though. Also preferably I would like to be able to use both at the same time, with the bedroom PC just hijacking one of the four tuners on the infinitv 4 card.
I think i read somewhere that i could route all the comps on my home network through my computer in order to cut down on my kids getting around the firewalls and virus protection. i am fixing to go to linksys E3000 and AE2500 adapters for their comps. can anyone point me in the right direction on how to make everything run through me, so i dont have probs with the kids circumventing the network.
5 month old Dell XPS 8500 Win 7 64 bit Pro as main computer connected by Wired Adapter, Upgraded Gateway 5632E also running Win 7 64 bit pro as second connected by Wireless. Both running Kapersky successfully. no network problems for 5 mo.
Both were successfully linked using homegroup. Had to take Gateway to a remote location to do a business demo. While there had to link to a local public WiFi. While connecting made mistake and left homegroup.
When Gateway returned to homebase a few days later it was fine, had no problems finding wireless but could not see or rejoin Dell machine homegroup. It would let me set up a new homegroup.
Went to Dell box and found 1) homegroup no longer existed, 2) router and network and wireless printing no longer found - Red X on the taskbar) even though internet was still working fine.
Took nearly a week of trying differernt fixes, on adapter- off adapter- different adapter reboot network, router, even updated router firmware (Yes I went through every ipconfig reset, renew, redecorate etc. I've used netsh functions to try to get evrything to reset. Changes services.msc settings per other posts. Finally in desperation, deleted every sub key in the registry related to network locational awareness and got the Dell to find the network, let me set it up as a "home" network and then even see the invitation to join the Gateway's homegroup.
Then I hit a wall- when I try to join- Win 7 says I can't join the homegroup because the network is not a "home network". Of course troubleshooting is useless and goes into an endless loop. Have searched in desperation for any way to make Win 7 return to a clean slate so it can sense that it really is on a home network without success. Applied the fix-it and hotpatch for when Win 7 gets stuck in public mode. No joy. Deleted the hide wizard subkey as suggested elsewhere. No Joy. Gut feeling says problem must lie in the NLA or peer networking somewhere but where?
Does anyone know of a method or set of steps (short of a clean reinstall of Win 7) to completely clear every thing the OS knows about my network and force it to acknowlege my network is a home network? Is there a registry hack that will clear the problem?
I know I could abandon the homegroup and do conventional file/print share but I am concerned that using that solution won't last as whatever is screwing up the homegroup could eventually screw regular sharing and then I'm back to reformating/reinstalling. I'm just about ready to join the Apple folks so I never have to work on Windows again.
I'm reimaging one of my home systems that I intend to use as a "sterile" system (I will visit very a very limited selection sites on it, such as banking sites). I'm considering establishing the network location as "Public" instead of "Home", rationale being this would help prevent cross infection from other computers on my home network if they get a worm or virus. I do have friends that come over and hop on my network sometimes and who knows what contamination their systems have. Is this being overly paranoid? Will it cause annoying problems for this sterile system or other systems in my home network? I don't intend to share anything on this system with other computers on my home network. Seems to me that this ought to be the recommended setting for any computer always ... you can always share files using a USB drive if you really need to. Thoughts? Again maybe I am being overly paranoid. Back in the day there used to be worms that would look for ways to hop from system to system over the network, maybe that's much much harder these days. I do have a router between the DSL modem and my home network and I do run Norton Internet Security on all my systems?
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
Unable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening? - I have tried DHCP as well as Static addresses - Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it. - Removed Wifi connection and re-added it. - Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
Okay so I've installed windows and everything is working okay except i can't connect my laptop to my computer via LAN because it won't let me change it to a HOME NETWORK. It is just gets set to an unidentified Network. any possible suggestions?
Also I've look at removing this from the services but its not running it when i go under task manager, unless it somewhere else.
I was just wondering if I am able to take windows home basic off a store bought computer and put it on another computer. The reason for this is I am currently building my own and want to avoid unnecessary cost. As I own a laptop that I will no longer be using and a retail copy(windows home premium). So can I take the windows off my old laptop and put it on the computer?
I have a new HP Pavillon g4 with Windows 7 Home Premium installed and connect to the internet via an external antenna to a hotspot nearby. I'm trying to create a Home Network or Ad-Hoc computer to computer network without a router and without cables, using my Windows 7 computer as the master, receiving the internet, and my second computer running on XP SP2 as a slave. I have tried ad-hoc setup, but my XP does not connect to the internet (the XP connects without problem when I insert the external antenna directly). Does anyone know if it is possible to share internet between Windows 7 and XP and how to go about it? I googled for hours and tried different setups, all failed. I have successfully installed the "Virtual Router Manager", it works well between Windows 7 computers or tablets, but not with XP.
So, I was just wondering how I could get my laptop to connect to the network that is connect to my desktop that has win 7 installed on it. I'm trying to get the printer attached to it to talk with my mother's laptop that has win xp on it. Could someone please give me a pointer for that kind of connection?
I have two HP desktops running Windows 7. One is connected by wire to my router because the router is right near that PC. The other PC is downstairs and connected wirelessly. There is also a Mac downstairs, connected by wire. We also have an internet TV, Playstation 3, smart phones and tablets. All of these last items connect wirelessly to the network without problems. The HP PC downstairs can see and access my PC upstairs, as well as all my external drives, media server etc. I can see and access the Mac. I do see the other HP PC in my network folder, but when I try to access it, it won't work.I have discovery turned on on both. Strange thing is that sometimes, it works. But only now and then, and there doesn't seem to be any reason to this.
I thought that maybe mixing wired and wireless devices could be a problem, but all the other devices are fine. Also, I forgot that I sometimes use my Vista laptop, and that connects fine to other devices. It's only that one PC downstairs that I can't access. Is there a way to remove it from the network folder and maybe have windows 'find' it again?
I'm totally new to Windows 7, I've read through a lot of the threads here but can't fix the problem.
I have a network of two vista Pc's connected to a router, no problems. But I can't get my new windows 7 laptop to join the network. The laptop connects to the router and internet fine, but can't see either PC. The PC can see the laptop sometimes, but can't access it - when I click to open get a 0x80070035 error. And once I change a combination of settings the PC can't see it anymore.
I have also tried connecting just to the router, turning off firewalls but that doesn't work either. File sharing is on, on all computers.
I have a laptop with Windows 7 and I am trying to connect to my home network. My home network consists of two other Windows XP computers connected to a router. I have the Internet connection that the other two computers have, but I cannot see any of their files and they do not show up as network places. How do I fix this? I am not a tech person and I don't understand all this fiddly stuff and I'm getting really frustrated.
The weirdest thing is, I was able to access the other two computers fine yesterday but now they do not turn up?? I have restarted multiple times but to no avail.
I have a desktop PC with a Broadcomm Gigabit ethernet onboard. I live in a rural area and do not have cable internet and I have to use wireless. I have a UM175 wireless USB device. I use the USB to connect to the internet and use "Internet Connection Sharing" to share with my local connection (Broadcomm).
I set the Broadcomm to 192.168.0.1 and all the other PC's on my home network can get to the Internet through it.
My problem is I cannot get the Broadcomm network location to get set to Home. It keeps defaulting to Public, and because it is Public, I cannot use Homegroups with it because it is being seen as a Public network.
I tried removing the wireless card and, using Device manager, I disabled the Broadcomm and re-enabled it but when it came back online it automatically reverted to "Public".
I have a network setup with in our home, and am able to connect to it through windows 7 but after a bit of time all the other computers disappear off of the network. I have lowered the encryption and allowed windows to actively look for networks which it does well but it will only do this for a short period of time. Does anyone know how I can fix this problem? Like I said the network will appear and I do have access to it on occasion but then disappears and will not return.
Set Up Your Home Network, Windows 7 Edition. Here’s how you can get your Windows 7 PC to share printers and files with XP and Vista PCs--and even a Mac.
With Windows 7, you can more easily share files and printers across a network via the new HomeGroups feature. HomeGroups lets you connect to files and printers with a group password--if all the PCs have Windows 7. But I'll show you how to get your Windows 7 PC to play nicely on a network that also has Macs and XP/Vista PCs.
I have a windows 7 desktop and an XP laptop which I want to link together. I have shared my desktop machines folders by right clicking > properties, creating a shared name and adding the user: Everyone, to my security tabs.
However, I share a house and there is a folder I wish to share but only to my laptop, not to the rest of my house. I can't work out a way of recognising the users on my laptop, if I try to add a new user the location is fixed on Chris-PC and if I try to change no other locations appear.
I am trying to set up a home network within Windows 7 so it can communicate with two other machines, one has installed XP, the other Vista.
I have set up home networks in the past no problem (not on 7) & whilst I can get all 3 PC's talking to one another it appears that XP & Vista can not only see my shared documents but also my user documents, more worrying is that both other machines can edit or change any of my user documents!
I would prefer none of the other PC's connected to the network to see my documents let alone gain access to them & whilst this folder is supposedly locked it isn't!
I have Windows 7 64-bit installed on my PC with Virtual XP Mode installed. I have an application that I installed within Virtual XP. Now I'd like this application to connect my SQL Server installed in Windows 7.
The problem is I can't access any network resource from my XP mode. The funny thing is I can access the internet from it. I tried browsing Entire network and it sees the workgroup but doesn't see the other PCs in the workgroup.
i've got a new laptop, running win7 home premium 64bit at the PC i have win7 ultimate 32bit
i've set the workgroup to be the same on both computers when i try to enter any of the computers (from the laptop to the PC or vice versa), i get the username / password screen there are no passwords on any of the users logged in to the windows and each system has only one user.
if i remember correctly, if both are on same workgroup, nothing else should be done in order to see shared folders.
Is it possible to set up a program server on my home network with Windows 7? If so, how would I go about it?I have 5 desktops on my home network. 3 are running 64-bit Windows 7 and 2 running 64-bit Vista. I would like to have one of the computers act as a server for the others. I'd like to install all the programs on this computer and be able to open them locally on the other PCs.Is this doable with Vista/Win 7?
