I have a question, may be someone knows: I ran out of the USB slots, so I decided to use an add-on PCI card. I have an old Belkin USB 2.0 card, not sure whether this is exactly the model number that I found on their website, but may well be, since the card, according to Belkin is supposed towork on "Windows® 98 SE, Me, 2000, OS, or XP with USB 2.0 support".
Now, will this thing work with Windows 7 x64? Is there anyway to find a proper driver, or the system has some generic driver that would be good enough?
I could just try and plug it in of course, but thought to ask first, may be someone knows and will save me some trouble - if there is any trouble waiting for me .
I recently bought a USB 2.0 upgrade kit, but after plugging it in, my computer hasn't seemed to recognise it as 2.0 or even a Belkin product. Drivers were installed when I started windows, but they were just generic Microsoft ones, and I can't seem to find the Belkin drivers anywhere.
I tried using the ones that were on the disc, but windows tells me that up-to-date ones are already installed. I've contacted Belkin, after looking all over their site (the product I have doesn't seem to be listed in the driver section, but I found a pdf manual for it).
I don't found driver for this PCI card: belkin wireless g plus desktop card ver. 2001 ef driver The sistem is Windows Ultimate x64 and in the manufacturer page are only drivers for previous Windows.
I'm having problems with my belkin wlan card on windows 7 64bit.
I have tried what seems like hundreds of different driver/method combos all to no avail.
My WLAN card is a Belkin F5d7000 E, version 1100ea.
It has an atheros AR2413A - 001 chipset.
I really can't figure out where I'm going wrong, I've tried to run in compatability mode on pretty much every setting, always ran as administrator, and am fresh out of ideas.
I had a sabrent wireless desktop card that was a major problem after upgrading to Windows 7. It would some a fe wminutes and then do nothing for the next 12 hours. SOmetime it would should the connection is all good, at at times it would say DNS server is not responding.
I used the latest RALINK drivers from their website that said it was for Windows 7. Called Sabrent and RALINK like 10 times, left voicemails and notes for tech support, they never EVER called me back.
Since I had this Belkin wireles routre at home which has been doing pretty good, I decided to buy a belkin wireless card too. I landed up buying the Belkin F5D8001 N1 Desktop Wireless card.
Guess what? it comes with a XP CD. Their site has a newer version for Visa 32/64 bit as well. How ever the XP software does not get installed from the CD. If I point to the drivers folder on the CD it does not work too.
When I try installing the new execuctable on their website (vista 32/64 bit) it says the version could not be determined. I tried the compatibility mode for every damn possible version XP, Win 2000, Vista SP1 , SP2...no luck...its the same message.
Belkin says they don't know when the windows 7 driver will be out.
I have an HP Pavillion dv6000. I'm using a parallel port expresscard that I am trying to use with a printer who's driver needs to know the port number. How can I find and/or set the COM port for the expresscard?
I have a USB DVB card that works good! 3 days ago I have working on virtual com ports in matlab soft! and after that when I connect dvb card to my laptop usb ports the dvb software doesn't detect dvb card! and shows this message: all capable dvb adapters are busyno free device has been found after that I try to reinstall matlab and dvb soft and dvb driver too, but it hasn't work yet
I recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64
I just bought a new computer from a computer shop. It is custom built and has the following:Has 8GB RAM, 3.3ghz intel core i5-2500k, windows 7, Intel HD graphics so upto 1.7GB max video memory, 1 VGA slot, 1 DVI slot.Just to confirm I checked in person and my tower has a VGA port and a DVI-D dual link port.
my 2 no usb port and lan port are not working other wise other 1 no usb port working this is new laptop i think driver not installed because when i connect the pendrive there was light showing in my pendrive.so i want drivr
i updated my pc from vista to windows 7 yesterday, when i had vista my internet work perfectly!! never a problem... but when i installed belkin software off the disk that it came up with, plug your usb in.... so i did, but after a 10min wait, nothing happend. i have uninstalled and tryed again, but no luck.... still the same problem..
any one know any good ideas to get the wireless usb working?
Ive been trying to install my wireless drivers, when you run them form CD everything seems fine and says installed, but when it says connect your usb device it starts to instal the intantly stops and says driver not installed..
Its a belkin G usb wireless adapter 802.11g model number F5D7050
Any help would be great , had to switch back to vista to use the internet.
I just installed windows 7 RC on my computer. Everything loaded fine, but I am having trouble getting my belkin wireless G usb working. I run the driver and it installs fine, and when it prompts me to insert the usb. When I insert the usb nothing happens. I have tried other USB ports and running in different compatability modes. It worked fine in XP. On the hardware screen I can see that it is plugged in, but it says it is an unknown wireless usb card (sor something similar to that).
Here is a potentially great product that (if all claims are true) would solve my home office issues, yet it is not officially supported in a 64-bit environment as Belkin does not officially have a 64-bit driver.Can anyone suggest a 'gray market' 64-bit driver for the Belkin F5U273?Or do I have no other option than to 'step down' my operating system to the 32-bit environment (Dell Studio 1747)?
Just thought i would post a workaround, fix, solution for this until ms does possibly.... although it may be a belkin problem to fix
Hardware affected: Belkin Network USB Hub F5l009
Situation: Installing and getting usb network hub to communicate
Problem: Constant disconnecting of drives and Control Center crash/hang on exit. Under Windows 7 the drives/printer would connect, but then upon initial scan of a device it would close the connection, losing it completely, but still showing the device and devices attached to hub available on the network, not disabled like i have seen it show before when a problem with a device on the hub would occur.
Resolution(s): First running both the install software under vista comp and the actual connect.exe (Control Center) under vista comp after install before initial run. Secondly, under XP this device worked fine without having to manually port forward the hub thru the router. Whether a flaw with the software under XP or the utilization of Upnp under XP (which i use on xp and network).
Quick solve: Make sure to forward the ports manually, both tcp and udp. Also putting the device on DMZ will not work..
I have a Belkin wireless unit what kind of # am I looking for ? There are a lot of numbers on it so which one do I need ? I'm looking for my security number for my wireless.
I wonder if anyone has got this one to work, I've tried everything, I did have problems with it on Windows XP also, but always got it to work after a while, but now it seem impossible to get it working and im in desperate need for help!
I've installed the latest drivers and when it tells me to plug in the USB adapter, I do that but then it says it can't find it but it did install the software and such so I reboot a few times to see if it starts working, but no, it just wont work, i've done the compability thing also but still doesnt want to work.
Like everyone else I've been having trouble with getting the F5D7050 to work on Windows 7 32-bit. I went through the different compatibility modes using the v4 drivers from Belkin's site. My results ranged from OS not recognizing the driver as compatible to BSOD when using the network. Finally I tried Vista SP1 mode. It works! That's the only mode that worked for me.
I read alot topics on this forum to try solve my problem. I found in here 2 topics about Belkin Wireless G USB adapter , but still i have a problem
I describe whats the problem .
I try to instal on my Windows 7 x64 b.7000 drivers for belkin w g usb adapter f5d7050
I download drivers 4 belkin usb adapter f5d7050 ver.3(like I read about it) - before install i change in install file the compability for all users to windows xp , but it dont wanna install(I get a error)(the product only supports Win200/Winxp32/Vista32/Vista64) , then i switch compability for windows vista and instaler go on,
While installer is going it ask to connect adapter to usb ,what i do, but it seems dont find any anyway .
After all when instalation is finish i just get information that device dont work proply , and the light in adapter never go on
I try update drivers from menage device but still device is not working
I really dont know what else i can do
Mayby that will be some clue
i install Windows 7 on separetly partition "E" , so I have on c: vista , and on disc e:Windows 7 , but in windows 7 mode i cant see partition with Windows vista(I can see just in Disc menagment, that she still there),
. when i open windows vista i see all partitions.
did it make any sense?
anyway my main problem is to instal belkin drivers 4 adapter to WORK fine.
Anyways i just got my windows 7 ultimate working and everything is working fine expect my network adapter. I installed the vista drivers found on the belkin website. Which did the trick and made it work. But i noticed every 2 hours or so the adapter would disconnect from my internet while everyone else in the house who are on xp/vista works percfectly.
Now im not sure if this is because my network adapter isn't compatilbe with windows 7 or something else. Oh and im using Belkin Wire G+ Mimo ver 3001
Can anyone help me out, and also is anyone else getting this problem If there is nothing i can do what network adapter would you guys recommend which works with windows 7 and i can get in the uk :P?
Have just installed Windows 7 Home Premium, I installed my Belkin F5D7000 PCI wireless internet adaptor drivers, installed the card when prompted and when I rebooted, the computer got to the starting windows screen then booted again and went into black screen mode giving me the option of starting windows normally (didn't work) or system repair, system repair then did a system restore and therefore I lost the drivers. I reinstalled the drivers and it all works so long as I don't turn my PC off. I have tried to use windows device manager to update the drivers but it reckons they're up to date.
Trying to install a Belkin Wireless or Retail Plus+ N USB Adapter, which the microsoft page says is compatible with Windows 7 (for the Belkin) and receiving an error basically saying the driver is not compatible with this operating system.
This is a brand new computer that came with Windows 7 installed and has 0 internet access right now....what can you suggest?
Also, I do have a wired internet access point in my house I can move it to, if there is something I need to download I can probably do this.
It's been hours, and I feel like I may have to take the whole thing back.
I would prefer to use the Retail Plus+ USB adapter for this system if given the choice, since the Belkin is in use on another computer in the house, but I'll take whatever is out there.
ive got windows 7 ultimate. Ive been trying to install my wireless drivers, when you run them form CD everything seems fine and says installed, but when it says connect your usb device it starts to instal the intantly stops and says driver not installed..
