Show A Picture On A Folder In An External Hard Drive
Jun 1, 2008
I have an external hard drive (portable) that I have stored a bunch of digital scrapbooking kits on. When I plug it into my laptop, I can not figure out how to change the view of it so I can just put one "picture" on the folder. I need to know what is in each folder by looking at one picture on the icon and for the life of me, I can not get it to work. I right click, go to customize and choose file. I pick what I want on there and then click apply and it does not work. I am at a loss. Does anyone have any ideas for me. I can get it to work on something that is internal but not the external.
I just bought and installed a external hard drive. I am fairly knowlegable about computers but this is my first Ex. Hard drive and know very little about there use. So what I want to know is how to save my Family Tree Makers files to it. And once I do that how do I know for sure it is opening from my new drive and not my computer C: drive? I saved it to a DVD one time but when the time came when I needed it all that was there was a short cut but no files.
I have a WD 3,5 Hard drive and I bought I case so I could make it external. However, when I connect it to my laptop, running on Vista Home Premium x64 SP2 it does not work. The drive is seen by Vista (it shows up in the Disk Management section in Computer Management) but it does not show up in My Computer. In Disk Management it appears Disk 1, Dynamic, Invalid, with a red downwards arrow. As I have all my info there a soluyion that requires a format is not an option.
I edit my external HD sometimes to change names of my files & I get this message.
Destination Folder Access Denied, then I have to click Continue, then in user accounts control it says windows needs your permission to continue & I have to click Continue again. XP didn’t give me this run around, what’s the deal with Vista? I’ve searched but can’t find a fix for this.
I’m the Admin & can’t understand why Vista is treating me like a child & making me double check what I tell it to do. Isn’t my computer a PC or is it now owned by Vista!! That’s frustration coming out but I have other small issues about user unfriendly Vista where XP was user friendly.
Is it possible to copy my entire hard drive onto an external hard drive. Vista Premium, all the data, etc. and what would be a good software to accomplish this?
I have an external hard drive, I reformated it so I could use Vista's backup.Now it seems that when my brother inlaw tries to put some music files(Itunes) that the hard disc is unavailable to his computer. At this stage it seems that Vista has conned me into destroying a perfectly good WD harddrive!I have created a second partion on the hard drive and I am reformatting that, as I write this, but the only formatting option seems to be this NTFS, and that is what I had already formatted the ExtHD to so I think this formatting will be to no avail!From what I can figure I need to format into FAT but I tried a quick format an ex-fat option was there, but the problem was the same. I am becoming more frustrated with Vista, seems I just keep running into things that should be simple and aren't!
when booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
I was starting my computer today (that has Vista), and during the start up process, a black screen came up stating that there was an error opening up my external hard drive and it was checking for errors. After it finally booted up, I went to open the hard drive files, and it was totally BLANK! I then restarted the computer, and still the hard drive is EMPTY! I had ALL my important files in there!
The ONLY thing that looks promising is that when I go to Start then to Computer, it shows the hard drive there, and it still shows that 43GB are free of 111GB of storage (same info shows by right clicking on it and going to Properties). Why would it show this if nothing is on the hard drive anymore? Is there ANYWAY to recover these files again you think???? I NEED those files!!!! Remember that the hard drive STILL PHYSICALLY WORKS. It's just that I cannot access the files on my pc at the time for some reason.......
I just bought and installed a external hard drive. I am fairly knowlegable about computers but this is my first Ex. Hard drive and know very little about there use. So what I want to know is how to save my Family Tree Makers files to it. And once I do that how do I know for sure it is opening from my new drive and not my computer C: drive? I saved it to a DVD one time but when the time came when I needed it all that was there was a short cut but no files.
I recently bought a western digital 1TB hard drive which I had to reformat before I could use. Everything works good now, except for onething. Sometimes the computer doesn't want to restart while the new drive is plugged in. If I remove it from the USB port prior to restarting, it will restart just fine.
It shuts down and turns on without an issue. This only happens when I restart the system with it plugged in.
I just Bought a 120Gig External HardDrive and i want to put An O/S on it how do i do that? i bought an external HDD because all my PC games take up all my HDD space in my computer :P)
I got a large external hard drive today and it's instructions say to go to disk management and do format and partition. I messed up and deleted the drives volume. Now it is not listed in disk management. I looked everywhere to get it back and can't figure it out. How do I make Vista recognize this drive again so I can partition and format it?
I am in need of assistance concerning my external hard drive. My hard drive has been working flawlessly for the past 3 years. As of today, my computer no longer recognizes it. This is what I have done so far:
-Unplugged it, plugged it back up, and my computer made a chime saying that it was recognized and said that it was ready to go. -However, the HDD does not show up on the my computer tab.
-I removed the HDD from its enclosure, purchased a USB 2.0 to SATA/IDE and tried uploading the HDD to my wife's computer. Once again, her computer chimed saying that it was recognized (she runs XP, i have vista), but, once again, the hard drive was not in the my computer folder.
-I then proceeded to Computer Management, Disk Management, and noticed that my external hard drive is not there either.
I thought that maybe intially my power cord to the outlet in the wall just went bad, but after I bought the USB to SATA/IDE adapter and it still didn't work...well, I ran out of options.
I recently had a laptop not recognize its own operating system. I figured if I were able to load Windows Vista on to an external hard drive and boot the computer from that external hard drive I should be able to recover some files and major downloads before I reformat the computer. However, Vista instillation will not install through USB2.0. Is there any way to install Vista onto an external hard drive? How and what do I do to get it done?
I run Vista Home Premium on a self build computer with an Asus P5B Delux motherboard. It has an e SATA socket and I recently bought a Caddy for an External Drive to use as a back up with Windows Live OneCare. The drive is a 320G Seagate SATA2 ST3320620AS identical to the internal drive in my computer and the Caddy has eSATA and USB2 sockets. Everthing works fine if I connect via USB2 but the external drive is not recognised when I connect with eSATA. It may not make a lot of difference in practice but I would still like to be able to use eSATA. Does anyone know why the e Sata drive isn't recognised? Is this a Vista problem or perhaps there is a setting that needs adjusting?
I would like some advice on which external hard drive to buy for Vista Ultimate x64. I am not a techy and have read some posts which have left me more than a bit confused! The external hard drive needs to be easy to set up and use. I just want to be able to (very) easily back up my files on a daily basis and save photos, spreadsheets to the external hard drive.
I am trying to enable sharing on an external hard drive. I have sharing and permissions enabled. When I try to access the drive from another computer, I get the following error message:
(name of drive) is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission.
The drive is physically connected to a Vista machine and I want to be able to access it from an XP machine.
I have a Seagate Free Agent Desk ITB and there is some issue with it on my new dell, anyone have any suggestions. A search of the web found numerous similiar issues. I need an external storage solution of 1 to 2 TB with 2 drives.
I'm just about at wits end here. I've got an external HDD (Cavalry 2 X 500 GB = 1TB) that I usually plug in via e-SATA. It is currently setup in a SAFE33 configuration. It was working great on my old XP machine, and when I changed that machine to Vista Business (same everything, just plugged in a different boot disk and unplugged the old one) it continued to work great.
Then I did the following two things: 1) Tinkered with some permissions to allow only administrators access to some backups on the eHDD.
2) Went back to my old boot disk and tried to find the drive in XP.
When I did this the drive was not visible at all in XP. Now it is not visible in Vista either (not under Computer, Disk Management, or even BIOS). It is also not visible on my laptop (it had been previously). I have tried both e-SATA and USB connectors in multiple ports.
When I turn the drive on while either OS is running the machine freezes about 1 out of 5 times. Other times the eHDD turns on and I hear the disks spin up to speed, but the drive access LEDs never come on.
Don't know if this is related or not but I am also unable to load XP now, it stops on a driver called SPTD.sys.
i've had the Western Digital WDH1U10000N 1TB for a little over a week now. it was working fine, up until yesterday night. i made the switch from my PC to my laptop. when i plugged the USB into my laptop, the external hard drive was not recognized. so, i tried plugging the USB into another port, and after a few minutes it was recognized by the laptop. this morning when i plugged the external hard drive back to my PC, it is not recognized. moreover i can't find it anywhere on the computer. i know for a fact it is turned on, but i just can't find it anywhere on my computer. does anyone know what the problem is?
I am planning on putting ubuntu on an external hard drive. If I install Ubuntu on it, can I boot to it? I don't want to change any settings in bios, I just want to boot to ubuntu occasionally.
I have an HP laptop with Windows Vista Home Premium 64-bit and I have two external usb hard drives; one to store everything (my files, videos, etc.) and I use the other one for virtual machines (although virtual machines are a bit slower because of the usb speed, but I'm really worried not to harm my laptop's hard disk)
1. The question I had is that: should I connect these hard drives all the time or I can unplug them if I do not intend to use them, especially the one used for virtual machines because it is used occasionally?
2. And another concern that I have is that when I have both hard drives connected and I start my computer up, it takes much longer time for my system to boot up and sometimes even my computer hangs when starting up when both hard drives are connected...........
I have a 500GB MY BOOK external hard drive that I use for my monthly backup. I did a right click/properties/general and saw My Book is almost used up. Do I format the external drive and start another back up series? Is there a way I can back up over the previous data? As you can tell I am new to external hard drives....
I have a Maxtor basics 1.5TB external hard drive that's running fine on my vista home premium computer but as soon as I reboot or boot the computer vista says "you need to format the disk in drive". If I unplug the hard drive from the mains and plug it back in everything goes back to working perfectly. My question is can I make vista detect it correctly in the first place without me having to reboot the hard drive?
im using windows vista. i just recently bought a 500gb western digital external hard drive. i would like to know, how can i install an operating system on the external hard drive and keep the one that's currently on my pc, i would like to use the external hard drive to keep different documents, games, applications and files on, and to randomly boot of. (so its like their are two computers.) also will booting of another external hard drive have any affect on my computer or current files or hard drive.
one last thing, could i use the external hard drive to store flies on like i normally would. so what im asking there is that, do you have to use the whole external hard drive as an operating system, or could you sort of partition the external hard drive, so you could boot of it, but also connect it to a computer and use it like a normal usb when your not booted of it. sorry if this sound confusing i know a bit about computers but not too much.
This is a very basic question, but I'm a mac-user who's not very good with PC's, let alone Vista, so here goes: Long story short, I'm having trouble opening (?) an external hard drive. It's not showing up under Computer where all the drives and removable disks are listed, allowing you to open them and store things in them. I've verified that it's turned on, recognized by the computer, and enabled.
[If you want the backstory, here it is: I had to take the files on my external hard drive and temporarily store them in a PC, and I had no trouble doing that because when I connected the drive to the PC, it showed up, and I selected "open the folder" or something like that, and just copied and pasted the contents to the PC's internal hard drive. But now that I'm ready to transfer them back onto my external, I can't locate it (i.e. it's not showing up under Computer where all the drives and removable disks are listed). I know that the computer has recognized it, because it shows up in Device Manager. I just need to be able to open as if you're opening a folder so that I can put stuff back in it.
How do you reset it? I bought it one day at FRYS and I put a password and now I forgot that password. Is there anyway to reset it? Please share. I know I'm an idiot and fail at like for forgetting it. ;_;It's a MAXTOR by the way
