there is no setting in control panel, mouse, to stop the dble tapping of pad,,,i hate the fact that when u r in something , it may close on me,,,,if no setting in mouse, control panel, then what?
View 5 RepliesEverytime I try to open up the control pane, Vista tells me that Windows Explorer has stopped working, then restarts it.
I'm using Business Ultimate 64bit. I've run sfc /scannow several times.
I have a custom built PC,
Giga-Byte EP35-DS4 Motherboard
Intel Core 2 Quad at 2.4Ghz, Kentsfield model
2GB Ram, Crucial Ballistix DDR2
eVGA GeForce 8800 GT
Seagate 500GB HD
Samsung DVD Burner
Encore Wireless card
That's about it. Default BIOS setup.I tried running 'msconfig' and disabling all Non-Microsoft Services and all Startup items.
Interestingly enough, when I boot into Safe Mode I can access the Control Panel just fine. I don't know what that means.. I'm new to this, I'm a Mac user by default.
What would be the preferred setting for the Default Program in Control Panel (Windows Vista Home Premium SP2, 32 bit), if any? Is choosing IE .
View 6 Replies View RelatedIt has happened occasionally, but with no predictability that I can see. I change settings in control pannel / power settings / balanced to 10 min for monitor and never for computer. I check the "advanced settings" to assure that they are the same. I use balanced because that seems to be the default in the registry. I do not see the actual settings in the registry. Every so often Vista resets the settings back to 20 min for the monitor. I have looked at but it speaks of "System Settings page" - I don't know what that is. In any case, my settings have no effect and I can't get the monitor to dependably go to standby after 10 minutes.
View 7 Replies View RelatedJust installed Vista RC1 yesterday on my Packard Bell R0900 Notebook. Everything went well with the install, until it came to the performance test... I let it run for 1,5 hours and nothing seemed to happen (screen went black in the beginning, but that was all). So I decided to not let him do the test (after a hard reboot). And all looked fine, except for:
- Opening windows give a big lag (like control panel). It takes about 5 sec to load one window!
- Same for the start menu...
- On fading when for example vista asks whether you will allow something to run, makes it lag alot too... (Same when shutting down or logging of (the fade takes like 20 secs).
- When typing something, it takes like 3 secs to show the first letters...
i am unable to open links in my emails, the error i get is: this file does not havea program associated with it for performing this action create an association in the set asociations control panel.
I am using Vista ultimate x64bit.
Suddenly I cannot access the control panel or vista update or Backup,also the shortcut to Administrative tools is no longer there.
I have searched in vain with google and have not found a solution to this problem.
I cant open the control panel on my system either fron the desktop shortcut or the start menu. I did think it may be a driver issue after i upgraded my 8800gtxoc2 to the latest nvidia driver. I decided to do a system restore to just before i did the instalation, but after 6 attempts on several restore points they have all failed. I have strated my comp up in safe mode and removed the driver but the problem is still there. i have restarted the software licence but i am stuck now and need some advice before i bite the bullet and reformat. Using the origional vista disk is there a way of doing a re-instal without losing my data.
View 9 Replies View RelatedI turned on my pc and cannot get online wireless.. can not get windows live one care to work.. cant get my control panel to open... Alot of stuff not working...
Running vista home premium.
I can't open the CONTROL PANEL, after going start>control panel, the control panel comes up but then i get this message , "WINDOWS EXPLORER HAS STOPPED WORKING" and after that "WINdOWS EXPLORER IS RESTARTING" , all windows close and everything restarts.
View 9 Replies View RelatedI have vista home edition 32 bits. My control panel doesn't open. A screen opens then closes. I also can't get to the properties from right clicking my computer. I can't update windows.
View 9 Replies View RelatedI am trying to open microsoft powerpoint slide show and i get this error message: This file does not have a program association with it for performing this action. Create an association in the Set Associations control panel. How do i do this?
View 7 Replies View RelatedI did a clean install. (RC1 - Build 5600) At first, everything was working great, then the next day I have nothing in Control Panel. From the Start Menu it says (empty) after attempting to load it for 20-ish seconds. If I click the desktop shortcut, it will load the window frame with no content, then just close after 5 seconds. In Windows Explorer I can expand the Control Panel from the sidebar, and pick from there, but just selecting Control Panel, again doesn't work. I remember this being corrupted .cpl files back in the 3.x days, same thing maybe? I ran System File Checker, didn't fix it (did find corrupted files though, oi vey).
View 5 Replies View RelatedI have a new Windows Ultimate Installation and changed the Control Panel to Classic View, and also expanded it into the upper part of the monitor, but it does not remember it.
View 5 Replies View RelatedI have a new Windows Ultimate Installation and changed the Control Panel to Classic View, and also expanded it into the upper part of the monitor, but it does not remember it.
View 5 Replies View RelatedI have a question why does my control panel icon move from where I place it when Vista starts up also the Icons inside the control panel a HUGE! they have tiny lettering under them but man Stevie Wonder could see these! I mean I might have six Icons showing. I can move the control panel to the top and go into IE8 and boom bottom left hand corner which is where it always goes to. Any thoughts? I would be happy to leave it there but the icons inside now that's another thing. TIA for considerations.........
View 4 Replies View RelatedI was removing some programs form ym computer earlier and It asked me to reboot my computer once I removed BlueSoleil, So I did, When my computer loaded back up the Login Background was black and all I could see was the name and password field, So I decided to go on and as I'm currently learning BATCH program I decided to go and do some to only find that the Icons were missing, It just shown an "Invalid Icon" icon, I thought that couldn't be right and decided to SR (System Restore) But as I went onto the Control Panel nothing was showing up, No icons. No words. Nothing. I did WindowKey+F and searched for System Restore and found it bt as I tried to open it, It would give me an error due to the "Run As Administrator" compatability isn't working properly.
View 4 Replies View Relatedfor about 5 months now i have been trying to open control panel. i found a way to get into add or remove programs through computer then click the arrow into other things but we recently got wireless internet and i need to get into network connections or whatever it is which is in control panel. i tried to get it through the long way but it wont open.
This is what the error is:
I go start, control panel. it loads about half of the icons then a dialogue box pops up saying windows explorer has stopped working, looking for a solution etc etc.
Then it restarts windows explorer.
and i still cant access control panel. even though i can access all of the stuff except network connections (which i really need to get wireless) i still want to be able to go into and click control panel and for it to work.
Hey everyone. How ya been.
Basically here's my problem. I'm trying to open the Nvidia Control Panel, and it crashes and gives me the option to check for solutions online.. and Nothing seems to get the Control Panel to open.
Yes, I've done a Re Install of Drivers, I've updated and tried the 180.43, 44, 48 and then just did the 181.20's. Still doesn't work. I was then told that the 185 extreme G drivers helped someone with same problem. So I just barely installed those, with NO luck. It's still crashing. Basically I just got my new GTX 260 today and I now can run SLI, but I can't get the darn control panel open to enable SLI... I'm going crazy here.
I googled the problem, and someone suggested I delete the nvapps.xml folder in the actual driver file location and then reinstall. I tried that as well.
If ANYONE has any idea's on how to fix this I'm very open to suggestions. I've just installed NV system Tools, but if it's anything like nTune I don't want it near my system. lol.
Please help me out. I wanna see these babies in action.
Thanks!
my Vista Control Panel shows too many entries. If you look below, you'll see what I mean (Showing all CCC entries...)
View 9 Replies View RelatedAll of a sudden I'm having a problem with Control Panel. When I try to launch it, I see the outline of a window appear for a split second, and then it disappears, and nothing happens. Did a google search and apparently a lot of people are seeing this
problem, and have been seeing this problem since the alpha version of Vista. I've got SP1 installed, so apparently Microsoft still hasn't fixed the problem. How pathetic.
i installed a compatible printer for my new computer. it is now saying that i basically need to do it again. when i go to control panel the window is empty until i type printer in the search box and then x out. then the control panel options come up, but when i click on them nothing happens this is my first time with vista.
View 9 Replies View RelatedI used to have a graphics application on my computer (RealDraw). I uninstalled it. It does not appear in my Control Panel listing anymore. But, when I go into Windows Explorer, right-click and select the "New" menu selection, I still see the option for a "Real DRAW Project" on the list. Is there a way to get rid of this? If I select it, I get a ".rtw" file, but no application can open it. While this isn't affecting the operation of my comuter (as far as I know), it would be nice to clean up.
View 5 Replies View RelatedHowever, since reinstalling Windows (service pack 2) after a major system crash, I have no bluetooth at all and cannot connnect my mobile to upload pics etc. There is no icon in my tray and no bluetooth in the control panel nor on any searches.
View 8 Replies View RelatedWhen trying to open attachment, I get a error message. "This file does not have a program associated with it for performing this action. Create an association in the set associations control panel." How do I find the associations control panel and correct this error? This doesn't happens all the time.
View 5 Replies View RelatedI cannot open any now. Either when I try, it does nothing, or this last one said to "set association panel in control panel" which I have no clue where that would be in the control panel. Can't see anything.
View 5 Replies View Relateddoesn't seem to have changed anything. I can't find the Nvidia Control panel anywhere (there's an Nvdia folder on the C drive but no workable applications that I can see), and there musn't be any ethernet driver installed either as I can't get online (BT Voyager 205).
I guessing it's because the drivers don't fully support my set-up, but hoping I'm wrong on that and somebody can direct me to a download for compatible drivers! If all else fails I'll go back to XP, but obviously I'd prefer a workable version of Vista.
Have been trying to change the font in vista home premium 32 bit system. Found the fonts in control panel (all 300+ of them!) but cant work out how to apply them.
View 7 Replies View RelatedThe Power Options on my control panel simply don't work, no matter what setting I choose. Turning of my screen, sleep and hibernate ignore every setting.
View 5 Replies View RelatedI am currently running Vista Home Premium x64. I have a HP PSC 1610 and a Samsung ML-4600 printer, both of which were working ok with vista until recently. When switching either of the printers on, vista prompted that it was installing new devices, even through they had been previously installed and working ok. Each time vista says that it cannot find the drivers and prompts me to use the drivers that were supplied. I have downloaded the latest vista compatible drivers from the manufacturers website, but it still does not recognise the printer and says installation failed. Both printers have now disappeared from the printers control panel.
View 4 Replies View RelatedI want to uninstall Real Player 11, but it doesn’t show up in either Control Panel or Revo Uninstaller. There is absolutely nothing showing for Real, Real Player, Real Audio, Real Media, etc. I have a REAL Folder in C: PROGRAM FILES, which contains tons of files & folders. There are several .exe files (realplay.exe, realjbox.exe, recordingmanager.exe, fixrjb.exe, rphelperapp.exe), none of which work – nothing happens when they’re clicked… but no Uninstall file.
Does anyone know why REAL wouldn’t show up in Control Panel or Revo Uninstaller? I’m planning to just delete that C: PROGRAM FILES>REAL folder. I can’t see any reason why I shouldn’t, as long as I can revert to an earlier System restore point in case of problems.