My Office suite has had a bit of a fit, and the fix I've found involves creating a new user account, then exporting that account's registry. The kicker is that when I create a new user account, nothing happens. The profile shows up, as does the picture, but no directory is created in the Users folder, nor in the registry.
So, it shows up, but doesn't actually exist, and when I try and sign on to this new account, it says "The user profile service failed the log in. The user account can not be loaded." why this is happening and how to fix it?
I am running Windows Vista Home Premium 32 (system specs: laptop 2.1 Ghz core 2 duo, 4 gb RAM, 500gb hd (about half full) nvidia 8400M GS, Avira Premium Security Suite). I have had the computer for about a year running fine with 1 main admin account. Now when I need to create an account for another user I cannot create one, either admin or standard. When I create it, using either the control panel or command prompt, it creates the user picture, making the account visible on the control panel user accounts screen, and on logon screen. However, when trying to log into the new account I am greeted with the error "User profile service failed on logon. User profile cannot be loaded." The standard fix for this from various forums is to edit the registry key of the account. However, on going to regedit I see that no key even exists for the account. On further investigation I discover that no user files have been created either. I attempted a system restore, but discovered that all my past restore points were gone, and intruigingly, the computer had stopped createing 24 hour checkpoints. I cannot say for definite whether it was this issue or another one that caused system restore to mess up, as I don't check my system restore all that often. Either way, system restore is not an option. There have been mentions of a full Vista reinstall, though if at all possible I would like to avoid this.
And now I don't find the message I thought I sent 8 hours ago.
Which said roughly that I'm not finding my tries at making a user account without there being the conflict between 2 instances of Webroot's firewall, etc.
Should be asking in another place, but I can't find that place.
How do I determine what each acct. is made of, what pgms what files?
I see something about "Profiles", but the help files here tell me all about what profiles do, but not how to determine the profile's character.
I have a mates laptop, he gave it to me to fix as Vista has automatically created a new user account, his data is still there, only in another users account in the User folder, We dragged everything accross and reimported his emails, after rebooting, it has done it. How do I fix this without having to cut/paste everything again and how to i stop it from re-occuring?
When I install Vista, it wants to force me to create a local account, and it won't let me create one called Administrator, becuase the name is already used (thus the Administrator account exists). I don't want to create some dummy account just just to log in to join the domain. How do I get past the "Choose a user name and picture" screen and log in as Administrator so I can just install the network drivers and join my domain?
I use a admin account on my computer but when I added standard user account it will not open some web pages for example when I go to my yahoo mail it will show the email but when I click on it, it will not show any text, but when I use the administrator account the web page works fine, I can see and read all emails. Another example is when I go to ask.com and search under the standard user it comes up as a blank page but will show search results under the administrator account. I have windows vista home and 7.0 explorer.
I am unable to find anything resembling a Fax Account setup on my Windows Vista Home Premium machine. I have search the Web extensively to try and resolve this issue, but have had no luck. Everybody says you need to go to "Scan and Fax", under All Programs. My problem is that I have no such menu option anywhere.
i was wondering if there's any way to create a bloatless account which i can disable services and start up items in that account so when i log in with that account i can using it to play games and etc ... and have another one with all softwares and services loaded is that possible ?
I have created a task to start my Folding@Home client when the computer starts (the SMP client won't run as a service yet). The FAH client needs to run as admin, so I checked the "Run with highest privileges" box, enabled the option to run whether user is logged in or not and entered my user and password when prompted. If I run the task manually it starts and runs correctly.
When the computer is restarted, the client does not start and an error message is waiting in Task Scheduler as follows:Event ID: 101 OP Code: 6619136 Error Value: 2147943726When initially setting this up, I remember the error message saying something about a bad username/password. That isn't in the Task Scheduler history though. If I open the task and simply resave it (changing nothing, but entering username/password again), the task will start manually. This is so close, but very frustrating that such a simple task won't quite work.
I want to create a "system account" in vista 64 bit Ultimate. It's just a user account, it will have a profile but 99% of the time no one will log in interactively with this account, more often with just the RunAs option.
Once I created this account though, I have another icon for it on the logon screen! How can I get rid of this icon? I don't want other people who use this PC to log on like that.
It's a normal local account, non domain environment. I was hoping to find a "Do not display a logon icon" checkbox where you change the icon pic or something simple.
i created this account: pop.mail.yahoo.com smtp.mail.yahoo.com and i get this message -- Account: 'pop.mail.yahoo.com', Server: 'pop.mail.yahoo.com', Protocol: POP3, Server Response: '-ERR [SYS/PERM] pop not allowed for user.', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92 woodrow wilson
In my last article I showed you how you can protect your computer against anonymous user account attacks by turning on account logon auditing so you could see when someone attempts to remotely logon to your account. Now I am going to help your increase your level of protection with the Account Lockout Policy.
Creating an Account Lockout Policy will protect your account by limiting the number of time a remote application or attacker can try to guess your password. This works by automatically locking out your account after a designated number of incorrect passwords were entered. Your account will remain locked out for a designated period of time before it is automatically unlocked and it can be logged into again. This provides a valuable addition to your account security because it can render brute force password attacks useless. If you have your lockout threshold set to 4 bad attempts and the lockout duration to 15 minutes, an attacker can try to guess your password a maximum of 16 times per hour.
Now that you know how valuable an Account Lockout Policy is, let’s get it setup on your computer:
Click on the Start Button and key in Secpol.msc and hit Enter.
Navigate through Account Policies and Account Lockout Policy.
Right click on Account lockout threshold and select Properties.
Enter in the value you want to use and hit OK to save. I like to use 4 here....
I am running Vista Home Premium on an Acer stationary Aspire M3100. All running well except for one problem. I as a user can not install two specific programms. My wife and another user on the PC got the programms when I installed them, but I (admin.) cannot get them working. One is a programm for my Navigon GPS called NavigonFresh. I get two error messages: "Unable to create directory" and: "Cannot create file navigonavigon freshsettingsuser.xml". But as mentioned above the two other users on the machine have no problems!
The other one is my EPSON perfection scanner 1250. I installed it on the PC, but I can not use/open the programm - but the two other users on the machine have no problems! These are the only two programms on the PC giving me troubles. I tried to uninstall and reinstall but with same negative results. (I tried asking on my Danish newsgroup but negative).
I am trying to create a new user for my computer running on Vista home Premium. It says that it has created it but no folders have been created for it and when I try to logon it says somethin like 'the user profile service failed the logon' I've tryed going into regedit and doing that .bak thing but it hasn't worked.
I am running Vista Business, and am trying to setup faxing with Vista's built-in Windows Fax and Scan. I do not have a modem, and so I'm trying to connect to the fax on a Windows Server 2003 R2 server. This is a "standard" Server 2003, that is, it is *not* SBS (Small Business Server).
The server is a domain controller, but the Vista PC is not on the domain. However, both computers are on the same local network/subnet. On Vista I can map a drive that's on the server (providing the proper server credentials). I can even "Add new printer" to Vista by selecting network printer and entering the server address & shared fax name, then entering the proper server credentials. So this rules out any network issues, and at least mostly rules out authentication issues (since I'm able to connect to the server disk and printer resources if I provide a server administrator logon).
However, from Vista's "Windows Fax and Scan", when I try to create a fax account, it prompts me for the server name, and when I enter the server, it tells me that I don't have the appropriate permissions and to contact the fax administrator. This happens whether I enter \servername, \servernamefaxname, servername, faxname, \faxname. Also, I have made sure to run Windows Fax and Scan as an administrator, that is, right-click/run as administrator.
If I try to print to the fax printer that seemed to have been mapped successfully (that was mapped with "add printer" as described above), it basically takes me to the same step to add a fax account, at which point it tells me I don't have the appropriate permissions when I enter the server name. Note that when I "added" the printer, it prompted me for the credentials, and then successfully mapped the printer. Now in trying to use it to print (fax) something, it behaves as if I still need to create a fax account and tells me I have no permissions (and there is no option to enter a user/password).
I have two programs that need to run on boot up. In both cases I get prompted to allow. Can I turn this prompt off for particular users by turning UAC off? Or does it turn off for everyone? Can UAC be configured to be off for JUST these two programs?
I was just wondering if anyone could tell me about user accounts. I wanted to know if when you rename an account is it possible to rename the user file. An example is an account called "a" to an account called "b". I rename it to "b" the user file is still c:windowsusersa How would I go about changing the file name?
i have a problem do you guys usually put your nickname or your full own name for your vista account because i found out that vista does not have the capable of putting password on files.
All of the folders on my user account are gone and Vista reverted everything like my account was just created. I lost all of my files and everything else I have had. Its all been deleted!
It started this morning when I logged in and everything off of my desktop was gone. All of the files and everything. I don't know what happened, I didn't delete the account or make a new one or anything.
All I know is that my brother, he was stupidly going through my files from his user account (through Computer/Users), since he was made an admin, and he was deleting some files off of my user account. I'm not sure what it was but it must have been something he deleted that messed up everything! I still see some of the items in my garbage can of stuff that might have been deleted by the moron. The other user accounts are fine, its just mine that is missing everything and acting like its a brand new account.
I don't know what he deleted but I know he didn't do a complete wipeout of my account.I still have a feeling that my files are somewhere because the hard drive is still the same size.
I have accidently deleted my user account off my laptop (vista home premium 32bit) but my files are still there in the user section of my hard drive. Can i recover it? If so how? I have only recently deleted it and I have another account with administrator privledges on it.
I want to be able to automatically log onto my user account after sleep or shutdown. I unchecked 'require password etc.' under 'control userpasswords2'. But it keeps logging on to an administrator account.Is there a way to make the computer open at the desktop of my standard account? I would like the administrator account to be password protected.
My pc recently died whilst running a backup, so now i have no backup. Anyway, upon restarting after this issue, I can't log into my user account fully. I can get to a plain black desktop and I get this message in a bubble "Your user profile was not loaded correctly. You have been logged on with the default profile for the system. Please see the event log for details or contact your system administrator" I can't access my files of programs
I am giving my computer to a friend and am trying to clean it up for her. I added she and her husband as administrators and then deleted my account. But when I restart the computer I get a notice that the name is not the correct one. I change the user, but I end up having to click on my name which is still there, and entering my password. Then I see two of each of our icons. I can then click on another person. I went into the system and checked and it shows only the other two people as administrators and does not show my name.
I noticed a Standard user named "dlbj_IAM" in my Parental Controls and I didn't create this account. I have a stand alone Vista Premium computer with wireless connectivity. The account doesn't show up in "User Accounts" or when I check the users folder creation in explorer to determine when it was created - there are no folders created for this user. I would like to determine when this account was created and if there has been any wireless activity before deleting this account.
I set parental controls to high and put every restriction I could find on this account. I have gone to Admin Tools, Computer Management in hopes to look in Local Users and Groups but it doesn't exist. Is this something different about Vista Premium?
I made a user account a while back for the family members that always get on my computer so that they didnt mess with anything on my account. Why i didnt just use guest side im still not sure. I want to delete this account and turn on guest but it will not let me do anything with it. I have tried changing it to standard and deleting and nothing. I went into safe mode and tried to delete it and still nothing. Turned on the built in administrator account and still nothing. Im tired of them being able to change setting and things on the other side and i can not do anything about it,
I am listed as the Administrator on my laptop. After my Dad gave me this PC after having it and registering in his name, I renamed the Administrator from his name to mine. When I go under User Accounts, I am the only user listed. However, when I boot my computer, my Dad's log in information is listed first and it starts up automatically saying "Username or password is invalid" and then I have the click "Switch User" to log in under myself. I have tried to delete User Account in Safe Mode, but that did not work either. How can I delete this account so I may start up my computer with just my login information??
I've created a new user account but can't log into it - I always get the message "The User Profile Service failed the logon. User Profile cannot be loaded". I can log into all other user accounts. I am wondering if this has anything to do with the fact that I removed a user and then deleted the users's folder and all the files in that folder including NTUSER.dat file. Is there something I need to do to be able to log into the new user account(s)?
I cannot solve an issue with trying to access a Windows XP shared printer from a Vista Ultimate PC. I have read several articles on this on the web and tried a lot of the suggestions, but I am still not getting anywhere with this. My User accounts cannot print from Vista to the shared XP printer. The printer status shows Error - Printing. I have opened up the security permissions on the printer share to include Everyone, Guests, Users, Anonymous Users with full access, and I still get this error. My Administrator account does not have any problems printing from Vista.
Both computers are on the same workgroup. Both computers have identical user accounts with identical passwords and permission sets. The printer is an HP C4100. I checked with HP and I have the latest print driver. I have tried adding the shared printer using both local and shared printer settings, but still no luck. Both computers have all of the latest service packs and updates. I am at my wits end trying to fix this.
I tried to install postgresql-8.4.0. I didn't turn off User Account Control before doing that, which seems to be recommended. I think Postgres tried to create a user account called 'postgres', but it failed (I suspect because of UAC). Postgres installation could not finish normally. When I look in the Control PanelUser Accounts, no 'postgres' user is visible. When I try to create a new user called 'postgres' however, I get the following error message:
Quote: The specified account name is not valid, because account names cannot contain the following characters: /[]":'|< >+=,?* Please type a different name. It looks like I'm stuck with a corrupted 'postgres' user. Is there a way to clean this up?
