64 Booting With Only 254mb Memory!
May 11, 2009
I booted Vista yesterday and it was really really slow. To the point that it spent over 5 minutes on the loading 'welcome' screen, before rebooting, and if left would rinse, repeat the process etc...
System essentials; Q6600, 4gb RAM, Abit IP35-Pro, Vista Ultimate 64
After getting on in safe mode, I can see that;the system is only using 254mb of physical memory! That is all it shows as available in task manager I can see from the performance charts that the memory is maxed out at around 98% all the time. Even trying to run AV in safe mode is painfully slow I cannot even get into my event logs to see if there are any errors. Start > right click 'Computer' > Properties shows that my CPU and Memory specs are 'unavailable', which googling suggests WMI errors but I cannot check my logs! I tripple boot between Vista Ultimate x64, my old 32bit standard Vista and also Windows 7. I can boot into both Vista 32bit and Windows 7 without problem I have booted into both of the above in Safe mode to check that neither also restrict the physical memory in safe mode to 254mb which they do not (and had never assumed they would) I have run HJT and can see some odd services I cannot remove. However, full AV scans and Malware scans do not yeild anything of any use (cookies, no critical items).
View 9 Replies
ADVERTISEMENT
Apr 5, 2009
i installed vista 64 ultimate with 3 gig of ram but i was told that vista 64 could run with 4 so when i installed the 4th gig or ram my pc would turn on but not boot (did not see any display) so a friend told me that it is a known issue and to fix it i needed to reinstall service pack 1 with just 2 gig then that would allow me to install the full 4....i did this and now my comp will not boot unless i have just 2 gig, it wont even boot with 3 gig like before,
View 9 Replies
View Related
Feb 23, 2007
Memory DiagnosticsIf Vista detects a memory problem in your system such as a faulty RAM module, it will display a notification asking if you want Vista to try to diagnose the problem.Then again you may also recieve the sudden BSOD with the error MEMORY MANAGMENT at the top. You can manually run this tool anytime just typememory in the search box inside the start menu.This tool offers you two options: restarting immediately and checking for problems, or running next time you reboot your machine (the memory diagnostic tool must run at boot time).
Network DiagnosticsWindows Vista also allows you to check the connectivity of your network connection using the Network Diagnostics Framework: An infrastructure and a set of built-in and extensible components that attempts to automatically diagnose and correct network connectivity problems. The usual way to run this check is to open Network Center and click the Diagnose Internet Connection link on the left Vista will either identify ............
View 4 Replies
View Related
Nov 29, 2009
I had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit, but the available memory shown in the system is still 3.3 GB. Why is this and is there a way to make the full 4GB available? It's possible that my video card is using RAM instead of its own RAM. If I install a video card with its own RAM, will the full 4GB be available?
View 9 Replies
View Related
Jul 3, 2008
I have a problem with Vista Ultimate x64 SP1, I always seem to lose all my free RAM within an hour regardless of system activity, even while idling. I have noticed an svchost.eve process runs each time I reboot which seems to bloat constantly although when I close it down it only frees up about 800MB, what's happening to the rest of my 8GB??? When I launch Task Manager it says I'm only using 10% Memory but free RAM sits at 0?!?!
View 9 Replies
View Related
May 16, 2010
I had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked on usenet and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit (I did clean install of course), but the available memory shown in the system is still 3.3 GB. This is show in both task manager under performance->Physical memory->total, and 'property of My Computer'->Installed memory (4GB/3.3 GB usable)........
View 7 Replies
View Related
Aug 23, 2008
I am fairly new to the forums, and VERY new to Vista x64. The machine is new, and I was trying out some apps and games, I was in Secondlife when I got an error messege saying I was out of memory and needed to free up memory. I shut down the app and restarted it. Runs but I watched Task manager and saw my free memory down to almost nothing after an hour or so. The cached seems very high.
I did alittle research and decided to set a second page file on my 1TB hard drive, (OS is on the other HHD's )( regulated by system for size ) I'm not really sure whats going on. Example of just task manager and this page openis attached. Again, any help would be great in getting the memory set up on here optimal.
View 9 Replies
View Related
Oct 17, 2009
I have 6gigs of DDR3 memory at 1600hz. Running on Vista 64bit and every now and again my memory performance just maxes out. The problem can occur around the time when I am installing something but I dont think its always this way. I have read forums where it could be the hardrives performing self diagnostics. I have all the latest patches for vista.
View 7 Replies
View Related
Mar 26, 2009
I'm running Vista 64 Home (SP1) Premium on a homebuilt machine w/8GB (4 X 2GB modules). Windows is reporting 8 GB of Installed Physical Memory but is reporting only 4 GB of Total Physical Memory. I first noticed this when, after installing a game, the game system specs said 3092 MB of RAM.
I have checked the BIOS and it recognizes 8 GB. Memory Remapping is Enabled. Under Memory Remapping is "PCI MMIO Allocation: 4GB to 3328 MB" (?). MSConfig Boot Options shows Max Memory is not checked and no value in the box below. I tried enabling it and using 8192 as the value, but it made no difference. DxDiag shows 8 GB installed RAM. how I can get windows to make available all 8 GB of RAM? (Motherboard is ASUS Maximus II Extreme w/Intel Q9550 processor running at Q9650 clock speed, memory running at 1127 MHz
View 9 Replies
View Related
Jun 20, 2008
my vista home edition 32 bit hangs on the loading screen and does nothing. iv tried doing the start up repair thing but that didnt work, iv done a virus scan but it has come up with nothing. this problem is really annoying
View 4 Replies
View Related
Jun 3, 2008
I've just started having boot problems with Vista. I've had no problems in the past, but earlier this evening it would restart itself while loading Vista (the green bar loading stage). I used the Startup Repair option from the Vista install disc, and the log shows it successfully repaired a corrupted system volume (exact wording may have been different). Now it boots as far as loading a black screen and the mouse cursor, but doesn't get to the Aurora (blue-Vista-Windows-logo-loading thing). I have tried subsequent Startup Repairs, CHKDSKs, Memory Diagnostic checks, all with no errors to report. Unfortunately, I disabled System Restore a while back... Something I now regret doing! At least I know what I'll be doing as soon as I get it running again! My system is an ASUS M2N-E motherboard, AMD Athlon64 X2 6000+, Corsair 2x1GB XMS2 RAM, Sapphire ATi Radeon 3850... And so on and so forth. I'm running Vista Ultimate 32bit as well.
View 9 Replies
View Related
Jul 6, 2008
I just purchased a machine with a 64 bit OEM. I have created another partition because I want to install 32 bit on there. However, it is not working so I was wondering if there was something I am not doing right here. I want to use the 32 bit for internet access and itunes and the 64 bit for gaming. I do not have any discs with the 64 bit OS on it either everything I have here is 32 bit.
View 9 Replies
View Related
Jul 3, 2008
Can I partition my HD to two partitions, Install my copy of winXP pro on both (its only on one comouter so that shouldnt violate anything) and then upgrade one of them to vista using an upgrade disk? Will both windows work fine?
View 9 Replies
View Related
Mar 6, 2009
A friend's Vista computer started booting only as far as the round Vista logo then froze. I took the PC home and using my keyboard, mouse and monitor did some maintenance, upped the memory etc and took it back. It still froze at the logo. I replaced the keyboard and mouse and monitor one by one to no avail. Took everything home and it worked as a system, but at his house - still freezes. Is this an electrical problem - if so how could I find out? Their other computer works fine.
View 9 Replies
View Related
Aug 19, 2009
After booting up the computer the desktop freezes immediately. If it doesn't freeze up immediately I'll have some functionality, but minimal. I'll no longer have access to the internet (no network adapter present), can't run programs (they fail to open) or can't install programs/updates. I have even gotten a couple of Blue screen error messages such as: IRQL_NOT_LESS_OR_EQUAL and DRIVER_IRQL_NOT_LESS_OR_EQUAL.
In safe mode with networking I do have access to the internet. When I try to download updates in safe mode I can't because Install shield will not work, or some other excuse. There are no restore points to restore to. There was a Windows Framework update on August 7th. I tried to uninstall it, but apparently it was never installed properly. No blue screens while in Safe Mode. I've been trying to problem solve this on my own, but with my limited computer repair skills I'm scared to try things.
View 9 Replies
View Related
Mar 7, 2010
If I want to boot from the CD drive on ocassions, but otherwise boot
from the hard disk. How can I achieve this.
View 9 Replies
View Related
Mar 25, 2010
i have a Sony Vaoi VGN-NS11J im not sure if its a 32-bit or 62-bit. one day i was browseing facebook when my computer froze after leaving it for like 30 mins it was still frozen so i had to turn it off by the button and i know that is bad. when i tried to turn it on again it just gave me the options safe mode safe mode with networking and the other safe mode and start windows normally so i just started normally it gets past the vaoi screen and then on the microsoft windows screen it just keeps loading for like 10 minutes then it restarts then it gave me new options start windows normally or launch startup repair so i launch startup repair which takes like 40 minutes just to get to the actually repair place then it gives me no operating system to repair its just blank ive tried all the booting options start from last known good boot or something like that safe mode wont work and when i disable restart when startup fails i get the blue screen of death it gives me this message. A problem has been detected and windows has been shut down to prevent damage to your computer
UNMOUNTABLE_BOOT_VOLUME
View 9 Replies
View Related
Oct 23, 2008
I have a Gateway laptop that has (or had ) Windows Vista Home Premium x86 installed. It was a dual core Turion with 2GB RAM. Anyway, here is my problem(s):
When the computer first comes on, right after the Gateway screen it tells me:
System Config Data Read Error.
That is right when it turns on. The BIOS detects the hard drive just fine.
The second problem is:
It tells me that
Windows Failed to start. File: BootBCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot config data.
I tried to do a system repair with the Vista CD. It took about 10 times for it to work. If I turned the computer off, there is a 50/50 chance it would do the same thing and not work. I was chatting with Gateway support yesterday and the tech told me that Windows could be messing with the BIOS. I find that strange because I thought onceWindows took over, the BIOS has nothing to do with how the computer operates.
Well, I tried doing a system repair and it does not detect the Windows install at all. I figured well, I'll do a clean install and get rid of all of the crap that Gateway puts on their computers. I did that. I was able to make a new partition and format the drive. Windows is able to see the drive, but it tells me that it does not meet the criteria for the install. It will not go any further then that.
Gateway is going to replace the hard drive and if that does not work, they are going to service the laptop because I've only had it for a few months now. It worked fine on Tuesday, on Wednesday it did not work at all. Even with the hard drive out, it still tells me System Config Data Read Error on the BIOS screen. Just wanted to see what everyone else thinks.
I'm leaning more towards a drive controller failure or BIOS problem. If that is the case, then the motherboard needs to be replaced,
View 9 Replies
View Related
May 16, 2008
I have a pc running win xp media centre mp pc is dual core amd 64 bit 5200+ 2gb ram nvidia pcie 256mb graphics my hard disk is partitioned and xp is installed on the first partition I am trying to install Vista ultimate 64 bit on the second partition.
The vista installation will not complete I get an error when it is completing setup, saying that the pc shut down before installation was completed & the installation can not continue. The pc works fine under XP, are there any known installation issues with a Vista XP dual boot system?
View 6 Replies
View Related
Mar 8, 2009
i insalled vista ultimate and every time i go to restart the PC it will shout down but it won"t restart it stays on a black screen,i have to push the power button and turn it off and then press enter and it starts up.
View 6 Replies
View Related
Apr 1, 2008
My laptop (Sony vaio w/Home Premium) came with a trial version of Norton 360. I decided that would uninstall it and replace it with Avast! free home. I uninstalled Norton and any other Symantic software found in Add/remove programs. I also ran the Norton removal tool that someone posted a link to. Everything seemed fine. I noticed that Sony said I had a few software updates that needed to be downloaded & installed. I downloaded them and installed them. Still everything seemed fine.
I had downloaded an earlier version of Avast last month to install on another computer. I had also downloaded the lastest version last night. I accidently installed the earlier version. It installed without any problems but soon notified me that an newer version existed. I then installed the lastest version OVER the installed version. I guess this is where I goofed.
After the install completed the computer needed to reboot. Well the computer would not fully shutdown. My screen went black but the mouse was till lit and I could move the curser. I let the computer sit this way for about 20 minutes. I was finally able to get the computer to shut down by hitting the power button a few times.
This morning when I hit the power button the computer immediately went back to this odd state. Curser worked but no windows. I hit the power button a few times and the computer finally acknowledged it had a problem and allowed me to boot in safe mode. From here I did a system restore to yesterday morning. The computer is fine right now but I would still like to replace Norton with Avast. Then I would like to install SP1.
View 6 Replies
View Related
Jan 15, 2010
I can't find an active WinXp64 forum, and everyone has been very helpful here. I have a WinXp64 machine that is in a boot cycle. It goes through the whole sequence, then right as it should start the desktop, it reboots. All external peripherals are unplugged. Sometimes I can see a very quick flash of a blue screen of death, but can't make anything out as to what the error is. We have tried booting in safe mode and command prompt, but they also just reboot. How can we get it to boot again?
View 6 Replies
View Related
Apr 6, 2009
It's not just an ordinary not booting it doesnt show up anything after the bios screen....so i installed linux and i cant get windows vista to show up in the boot loader screen i can see all the contents of windows vista in linux and is there a way i could modify something in the vista drive to get it showing up again?
View 4 Replies
View Related
Dec 2, 2009
I have a copy of Vista which does not start properly in normal or safe mode. The desktop does not appear. When the PC boots I can sign on, but the screen with 'Windows' and a green background just remains and the disk light continues to flash. If I leave the PC long enough it goes to sleep and then will restart in this state. CTRL+ALT+DEL does not start the taskmanager. I can boot the PC using other operating systems. Is there anyting that I can do to make this copy of Vista start?
View 4 Replies
View Related
Mar 26, 2008
I have an Enpower tower that originally had XP on it then I got the Vista upgrade disc and have been having trouble booting up. I had took my tower to a local repair shop and they thought I needed a whole new mother board.
View 4 Replies
View Related
Mar 23, 2008
I have an Enpower tower that originally had XP on it then I got the Vista upgrade disc and have been having trouble booting up. I had took my tower to a local repair shop and they thought I needed a whole new mother board. I don't think so though because my tower worked fine before upgrading to Vista.
View 4 Replies
View Related
Feb 24, 2009
Someone once told me he could boot into vista x64 from cold in just 6 seconds, just cant believe that, he had a velociraptor in raid. I have a regular raptor and have tried every trick under the book to get a faster boot, normally take around a minute, even with a quadcore pc with 8gb ram... my partners laptop takes around 30 seconds off that and is nowhere near as powerful. Does anyone have any mega tips for fast boots apart from the dreaded hibernation? I even tried a OCZ SSD but thought they were a waste of money for the like 2 second difference.
View 4 Replies
View Related
Aug 23, 2008
I got myself vista64 and have noticed the boot up process is extremely slow, it takes 3-5 mins to boot itself up to Windows. Is this normal? I read somewhere that it's going to be like this for a while until Vista learns the boot process? I just some how stumbled onto this site and thought I'll ask and sincerely apologies if this has been asked. What I have noticed is that once my G11 keyboard lights up, it starts to load windows up.
View 9 Replies
View Related
Jun 7, 2009
I have an HP TX2508ca convertable tablet laptop. I've had it for nine months and it runs on Vista Home Premium 32bit. Just yesterday I removed the keys and cleaned out the keyboard. After fixing the keys back everything was working perfectly. However, this morning things started to go a little crazy. There is only one account on the laptop and that is my admin account which is password protected. My password has the lower case letter " l " in it but they " l " key on the keyboard had stopped working. So I tried to type it in using the on screen keyboard but still nothing. I tried restarting and repairing but still no go. The letter " l " key just simply doesn't workk; be it on the regular keyboard or on the on-screen keyboard. So now, I'm locked out of my account because the " l " key doesn't work.
View 3 Replies
View Related
Jun 29, 2009
Is it the DVD-Drive or the mainboard (with its BIOS or the onboard
controller)?
View 9 Replies
View Related
May 26, 2008
I've just got a new computer with Vista. I want to set up a dual boot system so that I can also access XP.
I have read that this is much easier to do if XP is the first OS, followed by installing Vista, but I can't do that.
I have also read that it can still be done by creating a new partition from within Vista, then installing XP into that. I understand that this process will overwrite the Vista boot loader and the computer will then only boot into XP, but that a programme called VistaBoot PRO can then be used to reset that, and you are then left with dual-booting.
But has anyone had any experience of doing this? Or are there any foreseeable problems.
E.g. - when I start installing XP, will it need access to the motherboard/graphics card drivers?
One thing I'm wondering about is, at the stage where I can only boot into XP, the hard disk is a SATA one (no RAID set up) and I seem to recall XP having issues with these at boot-up?
View 9 Replies
View Related
